Unable to login to my router
up vote
1
down vote
favorite
I use Ubuntu 16.04 and I have reset my router. Now when I enter the IP adress of my D-Link 2730U(=192.168.1.1) in my browser(FireFox, Chromium), I get the messege No internet connection.
Before resetting, the same IP adress took me to the configuration page.
I have changed my provider recently.
The LED that shows a globe is off.
internet
asked Nov 21 at 20:41
Codito ergo sum
1,0892725
add a comment |
up vote
1
down vote
favorite
I use Ubuntu 16.04 and I have reset my router. Now when I enter the IP adress of my D-Link 2730U(=192.168.1.1) in my browser(FireFox, Chromium), I get the messege No internet connection.
Before resetting, the same IP adress took me to the configuration page.
I have changed my provider recently.
The LED that shows a globe is off.
internet
asked Nov 21 at 20:41
Codito ergo sum
1,0892725
2
May be it have another default IP? Like 192.168.0.1 or similar? Usually printed on bottom or back of router. Did your PC get ip by DHCP from router?
– LeonidMew
Nov 21 at 20:49
1
@LeonidMew the same IP worked before resetting. Unfortunately I Don't know what DHCP is.
– Codito ergo sum
Nov 21 at 20:53
2
If you never change that ip all fine. DHCP is a service on your router what gives ip addresses to connected computers, what address it gives to your PC? May be you need to change network configuration on PC, after router reset. Set IP and DNS to auto in network interface config.
– LeonidMew
Nov 21 at 21:00
2
I do not see how this question is related to Ubuntu. The factory default for D-Link routers is 192.168.0.1 (not 1.1). Since you reset your router, try the factory default. If that doesn't work, then contact D-Link support.
– user535733
Nov 22 at 4:31
add a comment |
up vote
1
down vote
favorite
up vote
1
down vote
favorite
I use Ubuntu 16.04 and I have reset my router. Now when I enter the IP adress of my D-Link 2730U(=192.168.1.1) in my browser(FireFox, Chromium), I get the messege No internet connection.
Before resetting, the same IP adress took me to the configuration page.
I have changed my provider recently.
The LED that shows a globe is off.
internet
asked Nov 21 at 20:41
Codito ergo sum
1,0892725
I use Ubuntu 16.04 and I have reset my router. Now when I enter the IP adress of my D-Link 2730U(=192.168.1.1) in my browser(FireFox, Chromium), I get the messege No internet connection.
Before resetting, the same IP adress took me to the configuration page.
I have changed my provider recently.
The LED that shows a globe is off.
internet
internet
asked Nov 21 at 20:41
Codito ergo sum
1,0892725
asked Nov 21 at 20:41
Codito ergo sum
1,0892725
asked Nov 21 at 20:41
Codito ergo sum
1,0892725
asked Nov 21 at 20:41
Codito ergo sum
1,0892725
asked Nov 21 at 20:41
Codito ergo sum
1,0892725
1,0892725
2
May be it have another default IP? Like 192.168.0.1 or similar? Usually printed on bottom or back of router. Did your PC get ip by DHCP from router?
– LeonidMew
Nov 21 at 20:49
1
@LeonidMew the same IP worked before resetting. Unfortunately I Don't know what DHCP is.
– Codito ergo sum
Nov 21 at 20:53
2
If you never change that ip all fine. DHCP is a service on your router what gives ip addresses to connected computers, what address it gives to your PC? May be you need to change network configuration on PC, after router reset. Set IP and DNS to auto in network interface config.
– LeonidMew
Nov 21 at 21:00
2
I do not see how this question is related to Ubuntu. The factory default for D-Link routers is 192.168.0.1 (not 1.1). Since you reset your router, try the factory default. If that doesn't work, then contact D-Link support.
– user535733
Nov 22 at 4:31
add a comment |
2
May be it have another default IP? Like 192.168.0.1 or similar? Usually printed on bottom or back of router. Did your PC get ip by DHCP from router?
– LeonidMew
Nov 21 at 20:49
1
@LeonidMew the same IP worked before resetting. Unfortunately I Don't know what DHCP is.
– Codito ergo sum
Nov 21 at 20:53
2
If you never change that ip all fine. DHCP is a service on your router what gives ip addresses to connected computers, what address it gives to your PC? May be you need to change network configuration on PC, after router reset. Set IP and DNS to auto in network interface config.
– LeonidMew
Nov 21 at 21:00
2
I do not see how this question is related to Ubuntu. The factory default for D-Link routers is 192.168.0.1 (not 1.1). Since you reset your router, try the factory default. If that doesn't work, then contact D-Link support.
– user535733
Nov 22 at 4:31
2
2
May be it have another default IP? Like 192.168.0.1 or similar? Usually printed on bottom or back of router. Did your PC get ip by DHCP from router?
– LeonidMew
Nov 21 at 20:49
May be it have another default IP? Like 192.168.0.1 or similar? Usually printed on bottom or back of router. Did your PC get ip by DHCP from router?
– LeonidMew
Nov 21 at 20:49
1
1
@LeonidMew the same IP worked before resetting. Unfortunately I Don't know what DHCP is.
– Codito ergo sum
Nov 21 at 20:53
@LeonidMew the same IP worked before resetting. Unfortunately I Don't know what DHCP is.
– Codito ergo sum
Nov 21 at 20:53
2
2
If you never change that ip all fine. DHCP is a service on your router what gives ip addresses to connected computers, what address it gives to your PC? May be you need to change network configuration on PC, after router reset. Set IP and DNS to auto in network interface config.
– LeonidMew
Nov 21 at 21:00
If you never change that ip all fine. DHCP is a service on your router what gives ip addresses to connected computers, what address it gives to your PC? May be you need to change network configuration on PC, after router reset. Set IP and DNS to auto in network interface config.
– LeonidMew
Nov 21 at 21:00
2
2
I do not see how this question is related to Ubuntu. The factory default for D-Link routers is 192.168.0.1 (not 1.1). Since you reset your router, try the factory default. If that doesn't work, then contact D-Link support.
– user535733
Nov 22 at 4:31
I do not see how this question is related to Ubuntu. The factory default for D-Link routers is 192.168.0.1 (not 1.1). Since you reset your router, try the factory default. If that doesn't work, then contact D-Link support.
– user535733
Nov 22 at 4:31
add a comment |
1 Answer
1
active
oldest
votes
up vote
1
down vote
accepted
When you reset your router, your computer has probably lost it's own IP address.
Open a terminal and type in ifconfig -a to see what your own computer IP address is. Hopefully, if you're connected by Wi-Fi, you'll see a wlan0 and it will have received an IP via DHCP from your router. IF your router is 192.168.1.1, your computer should have an IP such as 192.168.1.2 or .3. The default gateway should be the IP address of your router.
If not, you'll need either set a static IP address, or check that DHCP is enabled on your laptop.
Alternatively, some routers may (loosely, probably don't), but try connect an ethernet cable and see if that allows you to browse to the router config page.
The following link should guide you to set a static IP address (it also shows how to check DHCP is enabled):
Switch To Static IP Address On Ubuntu 17.04 / 17.10
answered Nov 21 at 22:06
Aubs
422
New contributor
Aubs is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
1
down vote
accepted
When you reset your router, your computer has probably lost it's own IP address.
Open a terminal and type in ifconfig -a to see what your own computer IP address is. Hopefully, if you're connected by Wi-Fi, you'll see a wlan0 and it will have received an IP via DHCP from your router. IF your router is 192.168.1.1, your computer should have an IP such as 192.168.1.2 or .3. The default gateway should be the IP address of your router.
If not, you'll need either set a static IP address, or check that DHCP is enabled on your laptop.
Alternatively, some routers may (loosely, probably don't), but try connect an ethernet cable and see if that allows you to browse to the router config page.
The following link should guide you to set a static IP address (it also shows how to check DHCP is enabled):
Switch To Static IP Address On Ubuntu 17.04 / 17.10
answered Nov 21 at 22:06
Aubs
422
New contributor
Aubs is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
up vote
1
down vote
accepted
When you reset your router, your computer has probably lost it's own IP address.
Open a terminal and type in ifconfig -a to see what your own computer IP address is. Hopefully, if you're connected by Wi-Fi, you'll see a wlan0 and it will have received an IP via DHCP from your router. IF your router is 192.168.1.1, your computer should have an IP such as 192.168.1.2 or .3. The default gateway should be the IP address of your router.
If not, you'll need either set a static IP address, or check that DHCP is enabled on your laptop.
Alternatively, some routers may (loosely, probably don't), but try connect an ethernet cable and see if that allows you to browse to the router config page.
The following link should guide you to set a static IP address (it also shows how to check DHCP is enabled):
Switch To Static IP Address On Ubuntu 17.04 / 17.10
answered Nov 21 at 22:06
Aubs
422
New contributor
Aubs is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
up vote
1
down vote
accepted
up vote
1
down vote
accepted
When you reset your router, your computer has probably lost it's own IP address.
Open a terminal and type in ifconfig -a to see what your own computer IP address is. Hopefully, if you're connected by Wi-Fi, you'll see a wlan0 and it will have received an IP via DHCP from your router. IF your router is 192.168.1.1, your computer should have an IP such as 192.168.1.2 or .3. The default gateway should be the IP address of your router.
If not, you'll need either set a static IP address, or check that DHCP is enabled on your laptop.
Alternatively, some routers may (loosely, probably don't), but try connect an ethernet cable and see if that allows you to browse to the router config page.
The following link should guide you to set a static IP address (it also shows how to check DHCP is enabled):
Switch To Static IP Address On Ubuntu 17.04 / 17.10
answered Nov 21 at 22:06
Aubs
422
New contributor
Aubs is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
When you reset your router, your computer has probably lost it's own IP address.
Open a terminal and type in ifconfig -a to see what your own computer IP address is. Hopefully, if you're connected by Wi-Fi, you'll see a wlan0 and it will have received an IP via DHCP from your router. IF your router is 192.168.1.1, your computer should have an IP such as 192.168.1.2 or .3. The default gateway should be the IP address of your router.
If not, you'll need either set a static IP address, or check that DHCP is enabled on your laptop.
Alternatively, some routers may (loosely, probably don't), but try connect an ethernet cable and see if that allows you to browse to the router config page.
The following link should guide you to set a static IP address (it also shows how to check DHCP is enabled):
Switch To Static IP Address On Ubuntu 17.04 / 17.10
answered Nov 21 at 22:06
Aubs
422
New contributor
Aubs is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered Nov 21 at 22:06
Aubs
422
New contributor
Aubs is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered Nov 21 at 22:06
Aubs
422
answered Nov 21 at 22:06
Aubs
422
422
New contributor
Aubs is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Aubs is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Aubs is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
add a comment |
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1094935%2funable-to-login-to-my-router%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
2
May be it have another default IP? Like 192.168.0.1 or similar? Usually printed on bottom or back of router. Did your PC get ip by DHCP from router?
– LeonidMew
Nov 21 at 20:49
1
@LeonidMew the same IP worked before resetting. Unfortunately I Don't know what DHCP is.
– Codito ergo sum
Nov 21 at 20:53
2
If you never change that ip all fine. DHCP is a service on your router what gives ip addresses to connected computers, what address it gives to your PC? May be you need to change network configuration on PC, after router reset. Set IP and DNS to auto in network interface config.
– LeonidMew
Nov 21 at 21:00
2
I do not see how this question is related to Ubuntu. The factory default for D-Link routers is 192.168.0.1 (not 1.1). Since you reset your router, try the factory default. If that doesn't work, then contact D-Link support.
– user535733
Nov 22 at 4:31