Dell Vostro 3560 with BCM43142 adapter : bluetooth doesn't work












5














I installed the wireless driver using this instruction How do I install BCM43142 wireless drivers for Dell Vostro 3460/3560 and I have WiFi working. No problems here.



But unfortunately the bluetooth doesn't work. The ubuntu bar shows the bluetooth sign and I can turn the bluetooth on/off but I can't discover any devices. And I can't find my laptop when I turn visibility On. So, obviously bluetooth doesn't work.



I couldn't find the reports that blutooth can actually work with this adapter in Ubuntu. So, my question is: Is there anyone with BCM43142 adapter that have bluetooth working?



Thank You in advance.



PS. Ubuntu 12.10 x64



Update:



After some fiddling around with different drivers from different sources I managed to get bluetooth working. Not flawlessly but at least I can pair a device.
Bluetooth started working after installation of this package bt-bcm43142-onereic_0.0+20111116somerville2_amd64.deb
Originally I found this package on the disk with Ubuntu which came with the Laptop.
What this package does, it installs a firmware loader and a firmware itself. This firmware needs to get bluetooth working.



Still bluetooth sometimes doesn't work even with this package. But manual loading the firmware helps.



brcm_patchram_plus_usb --patchram /lib/firmware/BCM43142A0_001.001.011.0028.0036.hcd hci0


Also I found it strange that this package writes all different ids into /sys/bus/usb/drivers/btusb/new_id because only one from the list matches my device ID



bcm43142.conf:



install btusb /sbin/modprobe --ignore-install btusb && echo '0a5c 21d3' > /sys/bus/usb/drivers/btusb/new_id && echo '0a5c 21d7' > /sys/bus/usb/drivers/btusb/new_id && echo '0a5c 21e1' > /sys/bus/usb/drivers/btusb/new_id && echo '0a5c 21e3' > /sys/bus/usb/drivers/btusb/new_id && hciconfig hci0 up && /usr/bin/brcm_patchram_plus_usb --patchram /lib/firmware/BCM43142A0_001.001.011.0028.0036.hcd hci0 &


My lsusb:



...
Bus 002 Device 003: ID 0a5c:21d7 Broadcom Corp.


In conclusion: bluetooth works not nearly as good as in windows :( once I even got a complete crash of the system because of the btusb module. Luckily WiFi works perfectly :)










share|improve this question




















  • 2




    Possible duplicate of Bluetooth Broadcom 43142 isn't working on ubuntu
    – Pilot6
    Jul 28 '16 at 12:48
















5














I installed the wireless driver using this instruction How do I install BCM43142 wireless drivers for Dell Vostro 3460/3560 and I have WiFi working. No problems here.



But unfortunately the bluetooth doesn't work. The ubuntu bar shows the bluetooth sign and I can turn the bluetooth on/off but I can't discover any devices. And I can't find my laptop when I turn visibility On. So, obviously bluetooth doesn't work.



I couldn't find the reports that blutooth can actually work with this adapter in Ubuntu. So, my question is: Is there anyone with BCM43142 adapter that have bluetooth working?



Thank You in advance.



PS. Ubuntu 12.10 x64



Update:



After some fiddling around with different drivers from different sources I managed to get bluetooth working. Not flawlessly but at least I can pair a device.
Bluetooth started working after installation of this package bt-bcm43142-onereic_0.0+20111116somerville2_amd64.deb
Originally I found this package on the disk with Ubuntu which came with the Laptop.
What this package does, it installs a firmware loader and a firmware itself. This firmware needs to get bluetooth working.



Still bluetooth sometimes doesn't work even with this package. But manual loading the firmware helps.



brcm_patchram_plus_usb --patchram /lib/firmware/BCM43142A0_001.001.011.0028.0036.hcd hci0


Also I found it strange that this package writes all different ids into /sys/bus/usb/drivers/btusb/new_id because only one from the list matches my device ID



bcm43142.conf:



install btusb /sbin/modprobe --ignore-install btusb && echo '0a5c 21d3' > /sys/bus/usb/drivers/btusb/new_id && echo '0a5c 21d7' > /sys/bus/usb/drivers/btusb/new_id && echo '0a5c 21e1' > /sys/bus/usb/drivers/btusb/new_id && echo '0a5c 21e3' > /sys/bus/usb/drivers/btusb/new_id && hciconfig hci0 up && /usr/bin/brcm_patchram_plus_usb --patchram /lib/firmware/BCM43142A0_001.001.011.0028.0036.hcd hci0 &


My lsusb:



...
Bus 002 Device 003: ID 0a5c:21d7 Broadcom Corp.


In conclusion: bluetooth works not nearly as good as in windows :( once I even got a complete crash of the system because of the btusb module. Luckily WiFi works perfectly :)










share|improve this question




















  • 2




    Possible duplicate of Bluetooth Broadcom 43142 isn't working on ubuntu
    – Pilot6
    Jul 28 '16 at 12:48














5












5








5


6





I installed the wireless driver using this instruction How do I install BCM43142 wireless drivers for Dell Vostro 3460/3560 and I have WiFi working. No problems here.



But unfortunately the bluetooth doesn't work. The ubuntu bar shows the bluetooth sign and I can turn the bluetooth on/off but I can't discover any devices. And I can't find my laptop when I turn visibility On. So, obviously bluetooth doesn't work.



I couldn't find the reports that blutooth can actually work with this adapter in Ubuntu. So, my question is: Is there anyone with BCM43142 adapter that have bluetooth working?



Thank You in advance.



PS. Ubuntu 12.10 x64



Update:



After some fiddling around with different drivers from different sources I managed to get bluetooth working. Not flawlessly but at least I can pair a device.
Bluetooth started working after installation of this package bt-bcm43142-onereic_0.0+20111116somerville2_amd64.deb
Originally I found this package on the disk with Ubuntu which came with the Laptop.
What this package does, it installs a firmware loader and a firmware itself. This firmware needs to get bluetooth working.



Still bluetooth sometimes doesn't work even with this package. But manual loading the firmware helps.



brcm_patchram_plus_usb --patchram /lib/firmware/BCM43142A0_001.001.011.0028.0036.hcd hci0


Also I found it strange that this package writes all different ids into /sys/bus/usb/drivers/btusb/new_id because only one from the list matches my device ID



bcm43142.conf:



install btusb /sbin/modprobe --ignore-install btusb && echo '0a5c 21d3' > /sys/bus/usb/drivers/btusb/new_id && echo '0a5c 21d7' > /sys/bus/usb/drivers/btusb/new_id && echo '0a5c 21e1' > /sys/bus/usb/drivers/btusb/new_id && echo '0a5c 21e3' > /sys/bus/usb/drivers/btusb/new_id && hciconfig hci0 up && /usr/bin/brcm_patchram_plus_usb --patchram /lib/firmware/BCM43142A0_001.001.011.0028.0036.hcd hci0 &


My lsusb:



...
Bus 002 Device 003: ID 0a5c:21d7 Broadcom Corp.


In conclusion: bluetooth works not nearly as good as in windows :( once I even got a complete crash of the system because of the btusb module. Luckily WiFi works perfectly :)










share|improve this question















I installed the wireless driver using this instruction How do I install BCM43142 wireless drivers for Dell Vostro 3460/3560 and I have WiFi working. No problems here.



But unfortunately the bluetooth doesn't work. The ubuntu bar shows the bluetooth sign and I can turn the bluetooth on/off but I can't discover any devices. And I can't find my laptop when I turn visibility On. So, obviously bluetooth doesn't work.



I couldn't find the reports that blutooth can actually work with this adapter in Ubuntu. So, my question is: Is there anyone with BCM43142 adapter that have bluetooth working?



Thank You in advance.



PS. Ubuntu 12.10 x64



Update:



After some fiddling around with different drivers from different sources I managed to get bluetooth working. Not flawlessly but at least I can pair a device.
Bluetooth started working after installation of this package bt-bcm43142-onereic_0.0+20111116somerville2_amd64.deb
Originally I found this package on the disk with Ubuntu which came with the Laptop.
What this package does, it installs a firmware loader and a firmware itself. This firmware needs to get bluetooth working.



Still bluetooth sometimes doesn't work even with this package. But manual loading the firmware helps.



brcm_patchram_plus_usb --patchram /lib/firmware/BCM43142A0_001.001.011.0028.0036.hcd hci0


Also I found it strange that this package writes all different ids into /sys/bus/usb/drivers/btusb/new_id because only one from the list matches my device ID



bcm43142.conf:



install btusb /sbin/modprobe --ignore-install btusb && echo '0a5c 21d3' > /sys/bus/usb/drivers/btusb/new_id && echo '0a5c 21d7' > /sys/bus/usb/drivers/btusb/new_id && echo '0a5c 21e1' > /sys/bus/usb/drivers/btusb/new_id && echo '0a5c 21e3' > /sys/bus/usb/drivers/btusb/new_id && hciconfig hci0 up && /usr/bin/brcm_patchram_plus_usb --patchram /lib/firmware/BCM43142A0_001.001.011.0028.0036.hcd hci0 &


My lsusb:



...
Bus 002 Device 003: ID 0a5c:21d7 Broadcom Corp.


In conclusion: bluetooth works not nearly as good as in windows :( once I even got a complete crash of the system because of the btusb module. Luckily WiFi works perfectly :)







wireless 12.10 bluetooth broadcom dell-vostro






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited Apr 13 '17 at 12:24









Community

1




1










asked Nov 15 '12 at 13:39









Shein

31114




31114








  • 2




    Possible duplicate of Bluetooth Broadcom 43142 isn't working on ubuntu
    – Pilot6
    Jul 28 '16 at 12:48














  • 2




    Possible duplicate of Bluetooth Broadcom 43142 isn't working on ubuntu
    – Pilot6
    Jul 28 '16 at 12:48








2




2




Possible duplicate of Bluetooth Broadcom 43142 isn't working on ubuntu
– Pilot6
Jul 28 '16 at 12:48




Possible duplicate of Bluetooth Broadcom 43142 isn't working on ubuntu
– Pilot6
Jul 28 '16 at 12:48










1 Answer
1






active

oldest

votes


















0














I had the same issue on an Asus X202E (BCM43142 chip): with Ubuntu 12.10 x64, I had to install wireless driver as described above. Which works for wifi... but not for BT.



Now switched to 13.04 x64 and had wireless working without the need of installing wifi driver, Bluetooh still not working.
I'll try this evening the bt-bcm43142 package and see if I can get my BT working.



In anycase, thanks for the post, it's a nice resume of the BCM43142 challenge in Ubuntu.



Update



I have just installed the above mentionned package, rebooted and I now have BT working and connecting to devices :)



For readers who might face the same issue, here are some command output before installing the package:



$ lsusb
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 13d3:3388 IMC Networks
Bus 001 Device 004: ID 13d3:5188 IMC Networks
Bus 001 Device 005: ID 03eb:8417 Atmel Corp.

$ lspci -nn
02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)
03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8162 Fast Ethernet [1969:1090] (rev 10)

$ rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: brcmwl-0: Wireless LAN
Soft blocked: no
Hard blocked: no
3: asus-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
4: asus-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
5: hci0: Bluetooth
Soft blocked: no
Hard blocked: no

$ hcitool dev
Devices:
hci0 DC:85:DE:AB:4D:38

$ hciconfig
hci0: Type: BR/EDR Bus: USB
BD Address: DC:85:DE:AB:4D:38 ACL MTU: 1021:8 SCO MTU: 64:1
UP RUNNING PSCAN
RX bytes:549 acl:0 sco:0 events:31 errors:0
TX bytes:1168 acl:0 sco:0 commands:31 errors:0

$ sudo service bluetooth status
bluetooth start/running, process 944

$ dmesg | grep Blue
[ 8.954020] Bluetooth: Core ver 2.16
[ 8.954086] Bluetooth: HCI device and connection manager initialized
[ 8.954096] Bluetooth: HCI socket layer initialized
[ 8.954100] Bluetooth: L2CAP socket layer initialized
[ 8.954114] Bluetooth: SCO socket layer initialized
[ 10.975507] Bluetooth: hci0 command 0x1003 tx timeout
[ 11.088728] Bluetooth: can't load firmware, may not work correctly
[ 12.901647] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.901653] Bluetooth: BNEP filters: protocol multicast
[ 12.901664] Bluetooth: BNEP socket layer initialized
[ 12.909989] Bluetooth: RFCOMM TTY layer initialized
[ 12.910004] Bluetooth: RFCOMM socket layer initialized
[ 12.910007] Bluetooth: RFCOMM ver 1.11
[ 15.226150] Bluetooth: hci0 command 0x1003 tx timeout
[44180.125379] Bluetooth: can't load firmware, may not work correctly


We can notice that firmware can be loaded as per last libe here above. But after having installing it and rebooting the computer... All Good :)



$ dmesg | grep Blue
[ 8.768600] Bluetooth: Core ver 2.16
[ 8.768625] Bluetooth: HCI device and connection manager initialized
[ 8.768634] Bluetooth: HCI socket layer initialized
[ 8.768638] Bluetooth: L2CAP socket layer initialized
[ 8.768644] Bluetooth: SCO socket layer initialized
[ 8.989943] Bluetooth: can't load firmware, may not work correctly
[ 13.036311] Bluetooth: RFCOMM TTY layer initialized
[ 13.036327] Bluetooth: RFCOMM socket layer initialized
[ 13.036330] Bluetooth: RFCOMM ver 1.11
[ 13.037056] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.037059] Bluetooth: BNEP filters: protocol multicast
[ 13.037064] Bluetooth: BNEP socket layer initialized


wireless 13.10 bluetooth asus x202e broadcom bcm43142






share|improve this answer























    Your Answer








    StackExchange.ready(function() {
    var channelOptions = {
    tags: "".split(" "),
    id: "89"
    };
    initTagRenderer("".split(" "), "".split(" "), channelOptions);

    StackExchange.using("externalEditor", function() {
    // Have to fire editor after snippets, if snippets enabled
    if (StackExchange.settings.snippets.snippetsEnabled) {
    StackExchange.using("snippets", function() {
    createEditor();
    });
    }
    else {
    createEditor();
    }
    });

    function createEditor() {
    StackExchange.prepareEditor({
    heartbeatType: 'answer',
    autoActivateHeartbeat: false,
    convertImagesToLinks: true,
    noModals: true,
    showLowRepImageUploadWarning: true,
    reputationToPostImages: 10,
    bindNavPrevention: true,
    postfix: "",
    imageUploader: {
    brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
    contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
    allowUrls: true
    },
    onDemand: true,
    discardSelector: ".discard-answer"
    ,immediatelyShowMarkdownHelp:true
    });


    }
    });














    draft saved

    draft discarded


















    StackExchange.ready(
    function () {
    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f217590%2fdell-vostro-3560-with-bcm43142-adapter-bluetooth-doesnt-work%23new-answer', 'question_page');
    }
    );

    Post as a guest















    Required, but never shown

























    1 Answer
    1






    active

    oldest

    votes








    1 Answer
    1






    active

    oldest

    votes









    active

    oldest

    votes






    active

    oldest

    votes









    0














    I had the same issue on an Asus X202E (BCM43142 chip): with Ubuntu 12.10 x64, I had to install wireless driver as described above. Which works for wifi... but not for BT.



    Now switched to 13.04 x64 and had wireless working without the need of installing wifi driver, Bluetooh still not working.
    I'll try this evening the bt-bcm43142 package and see if I can get my BT working.



    In anycase, thanks for the post, it's a nice resume of the BCM43142 challenge in Ubuntu.



    Update



    I have just installed the above mentionned package, rebooted and I now have BT working and connecting to devices :)



    For readers who might face the same issue, here are some command output before installing the package:



    $ lsusb
    Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 003: ID 13d3:3388 IMC Networks
    Bus 001 Device 004: ID 13d3:5188 IMC Networks
    Bus 001 Device 005: ID 03eb:8417 Atmel Corp.

    $ lspci -nn
    02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)
    03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8162 Fast Ethernet [1969:1090] (rev 10)

    $ rfkill list
    0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
    1: brcmwl-0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
    3: asus-wlan: Wireless LAN
    Soft blocked: no
    Hard blocked: no
    4: asus-bluetooth: Bluetooth
    Soft blocked: no
    Hard blocked: no
    5: hci0: Bluetooth
    Soft blocked: no
    Hard blocked: no

    $ hcitool dev
    Devices:
    hci0 DC:85:DE:AB:4D:38

    $ hciconfig
    hci0: Type: BR/EDR Bus: USB
    BD Address: DC:85:DE:AB:4D:38 ACL MTU: 1021:8 SCO MTU: 64:1
    UP RUNNING PSCAN
    RX bytes:549 acl:0 sco:0 events:31 errors:0
    TX bytes:1168 acl:0 sco:0 commands:31 errors:0

    $ sudo service bluetooth status
    bluetooth start/running, process 944

    $ dmesg | grep Blue
    [ 8.954020] Bluetooth: Core ver 2.16
    [ 8.954086] Bluetooth: HCI device and connection manager initialized
    [ 8.954096] Bluetooth: HCI socket layer initialized
    [ 8.954100] Bluetooth: L2CAP socket layer initialized
    [ 8.954114] Bluetooth: SCO socket layer initialized
    [ 10.975507] Bluetooth: hci0 command 0x1003 tx timeout
    [ 11.088728] Bluetooth: can't load firmware, may not work correctly
    [ 12.901647] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 12.901653] Bluetooth: BNEP filters: protocol multicast
    [ 12.901664] Bluetooth: BNEP socket layer initialized
    [ 12.909989] Bluetooth: RFCOMM TTY layer initialized
    [ 12.910004] Bluetooth: RFCOMM socket layer initialized
    [ 12.910007] Bluetooth: RFCOMM ver 1.11
    [ 15.226150] Bluetooth: hci0 command 0x1003 tx timeout
    [44180.125379] Bluetooth: can't load firmware, may not work correctly


    We can notice that firmware can be loaded as per last libe here above. But after having installing it and rebooting the computer... All Good :)



    $ dmesg | grep Blue
    [ 8.768600] Bluetooth: Core ver 2.16
    [ 8.768625] Bluetooth: HCI device and connection manager initialized
    [ 8.768634] Bluetooth: HCI socket layer initialized
    [ 8.768638] Bluetooth: L2CAP socket layer initialized
    [ 8.768644] Bluetooth: SCO socket layer initialized
    [ 8.989943] Bluetooth: can't load firmware, may not work correctly
    [ 13.036311] Bluetooth: RFCOMM TTY layer initialized
    [ 13.036327] Bluetooth: RFCOMM socket layer initialized
    [ 13.036330] Bluetooth: RFCOMM ver 1.11
    [ 13.037056] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 13.037059] Bluetooth: BNEP filters: protocol multicast
    [ 13.037064] Bluetooth: BNEP socket layer initialized


    wireless 13.10 bluetooth asus x202e broadcom bcm43142






    share|improve this answer




























      0














      I had the same issue on an Asus X202E (BCM43142 chip): with Ubuntu 12.10 x64, I had to install wireless driver as described above. Which works for wifi... but not for BT.



      Now switched to 13.04 x64 and had wireless working without the need of installing wifi driver, Bluetooh still not working.
      I'll try this evening the bt-bcm43142 package and see if I can get my BT working.



      In anycase, thanks for the post, it's a nice resume of the BCM43142 challenge in Ubuntu.



      Update



      I have just installed the above mentionned package, rebooted and I now have BT working and connecting to devices :)



      For readers who might face the same issue, here are some command output before installing the package:



      $ lsusb
      Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
      Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
      Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
      Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
      Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
      Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
      Bus 001 Device 003: ID 13d3:3388 IMC Networks
      Bus 001 Device 004: ID 13d3:5188 IMC Networks
      Bus 001 Device 005: ID 03eb:8417 Atmel Corp.

      $ lspci -nn
      02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)
      03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8162 Fast Ethernet [1969:1090] (rev 10)

      $ rfkill list
      0: phy0: Wireless LAN
      Soft blocked: no
      Hard blocked: no
      1: brcmwl-0: Wireless LAN
      Soft blocked: no
      Hard blocked: no
      3: asus-wlan: Wireless LAN
      Soft blocked: no
      Hard blocked: no
      4: asus-bluetooth: Bluetooth
      Soft blocked: no
      Hard blocked: no
      5: hci0: Bluetooth
      Soft blocked: no
      Hard blocked: no

      $ hcitool dev
      Devices:
      hci0 DC:85:DE:AB:4D:38

      $ hciconfig
      hci0: Type: BR/EDR Bus: USB
      BD Address: DC:85:DE:AB:4D:38 ACL MTU: 1021:8 SCO MTU: 64:1
      UP RUNNING PSCAN
      RX bytes:549 acl:0 sco:0 events:31 errors:0
      TX bytes:1168 acl:0 sco:0 commands:31 errors:0

      $ sudo service bluetooth status
      bluetooth start/running, process 944

      $ dmesg | grep Blue
      [ 8.954020] Bluetooth: Core ver 2.16
      [ 8.954086] Bluetooth: HCI device and connection manager initialized
      [ 8.954096] Bluetooth: HCI socket layer initialized
      [ 8.954100] Bluetooth: L2CAP socket layer initialized
      [ 8.954114] Bluetooth: SCO socket layer initialized
      [ 10.975507] Bluetooth: hci0 command 0x1003 tx timeout
      [ 11.088728] Bluetooth: can't load firmware, may not work correctly
      [ 12.901647] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
      [ 12.901653] Bluetooth: BNEP filters: protocol multicast
      [ 12.901664] Bluetooth: BNEP socket layer initialized
      [ 12.909989] Bluetooth: RFCOMM TTY layer initialized
      [ 12.910004] Bluetooth: RFCOMM socket layer initialized
      [ 12.910007] Bluetooth: RFCOMM ver 1.11
      [ 15.226150] Bluetooth: hci0 command 0x1003 tx timeout
      [44180.125379] Bluetooth: can't load firmware, may not work correctly


      We can notice that firmware can be loaded as per last libe here above. But after having installing it and rebooting the computer... All Good :)



      $ dmesg | grep Blue
      [ 8.768600] Bluetooth: Core ver 2.16
      [ 8.768625] Bluetooth: HCI device and connection manager initialized
      [ 8.768634] Bluetooth: HCI socket layer initialized
      [ 8.768638] Bluetooth: L2CAP socket layer initialized
      [ 8.768644] Bluetooth: SCO socket layer initialized
      [ 8.989943] Bluetooth: can't load firmware, may not work correctly
      [ 13.036311] Bluetooth: RFCOMM TTY layer initialized
      [ 13.036327] Bluetooth: RFCOMM socket layer initialized
      [ 13.036330] Bluetooth: RFCOMM ver 1.11
      [ 13.037056] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
      [ 13.037059] Bluetooth: BNEP filters: protocol multicast
      [ 13.037064] Bluetooth: BNEP socket layer initialized


      wireless 13.10 bluetooth asus x202e broadcom bcm43142






      share|improve this answer


























        0












        0








        0






        I had the same issue on an Asus X202E (BCM43142 chip): with Ubuntu 12.10 x64, I had to install wireless driver as described above. Which works for wifi... but not for BT.



        Now switched to 13.04 x64 and had wireless working without the need of installing wifi driver, Bluetooh still not working.
        I'll try this evening the bt-bcm43142 package and see if I can get my BT working.



        In anycase, thanks for the post, it's a nice resume of the BCM43142 challenge in Ubuntu.



        Update



        I have just installed the above mentionned package, rebooted and I now have BT working and connecting to devices :)



        For readers who might face the same issue, here are some command output before installing the package:



        $ lsusb
        Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
        Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
        Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
        Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
        Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
        Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
        Bus 001 Device 003: ID 13d3:3388 IMC Networks
        Bus 001 Device 004: ID 13d3:5188 IMC Networks
        Bus 001 Device 005: ID 03eb:8417 Atmel Corp.

        $ lspci -nn
        02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)
        03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8162 Fast Ethernet [1969:1090] (rev 10)

        $ rfkill list
        0: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
        1: brcmwl-0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
        3: asus-wlan: Wireless LAN
        Soft blocked: no
        Hard blocked: no
        4: asus-bluetooth: Bluetooth
        Soft blocked: no
        Hard blocked: no
        5: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no

        $ hcitool dev
        Devices:
        hci0 DC:85:DE:AB:4D:38

        $ hciconfig
        hci0: Type: BR/EDR Bus: USB
        BD Address: DC:85:DE:AB:4D:38 ACL MTU: 1021:8 SCO MTU: 64:1
        UP RUNNING PSCAN
        RX bytes:549 acl:0 sco:0 events:31 errors:0
        TX bytes:1168 acl:0 sco:0 commands:31 errors:0

        $ sudo service bluetooth status
        bluetooth start/running, process 944

        $ dmesg | grep Blue
        [ 8.954020] Bluetooth: Core ver 2.16
        [ 8.954086] Bluetooth: HCI device and connection manager initialized
        [ 8.954096] Bluetooth: HCI socket layer initialized
        [ 8.954100] Bluetooth: L2CAP socket layer initialized
        [ 8.954114] Bluetooth: SCO socket layer initialized
        [ 10.975507] Bluetooth: hci0 command 0x1003 tx timeout
        [ 11.088728] Bluetooth: can't load firmware, may not work correctly
        [ 12.901647] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
        [ 12.901653] Bluetooth: BNEP filters: protocol multicast
        [ 12.901664] Bluetooth: BNEP socket layer initialized
        [ 12.909989] Bluetooth: RFCOMM TTY layer initialized
        [ 12.910004] Bluetooth: RFCOMM socket layer initialized
        [ 12.910007] Bluetooth: RFCOMM ver 1.11
        [ 15.226150] Bluetooth: hci0 command 0x1003 tx timeout
        [44180.125379] Bluetooth: can't load firmware, may not work correctly


        We can notice that firmware can be loaded as per last libe here above. But after having installing it and rebooting the computer... All Good :)



        $ dmesg | grep Blue
        [ 8.768600] Bluetooth: Core ver 2.16
        [ 8.768625] Bluetooth: HCI device and connection manager initialized
        [ 8.768634] Bluetooth: HCI socket layer initialized
        [ 8.768638] Bluetooth: L2CAP socket layer initialized
        [ 8.768644] Bluetooth: SCO socket layer initialized
        [ 8.989943] Bluetooth: can't load firmware, may not work correctly
        [ 13.036311] Bluetooth: RFCOMM TTY layer initialized
        [ 13.036327] Bluetooth: RFCOMM socket layer initialized
        [ 13.036330] Bluetooth: RFCOMM ver 1.11
        [ 13.037056] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
        [ 13.037059] Bluetooth: BNEP filters: protocol multicast
        [ 13.037064] Bluetooth: BNEP socket layer initialized


        wireless 13.10 bluetooth asus x202e broadcom bcm43142






        share|improve this answer














        I had the same issue on an Asus X202E (BCM43142 chip): with Ubuntu 12.10 x64, I had to install wireless driver as described above. Which works for wifi... but not for BT.



        Now switched to 13.04 x64 and had wireless working without the need of installing wifi driver, Bluetooh still not working.
        I'll try this evening the bt-bcm43142 package and see if I can get my BT working.



        In anycase, thanks for the post, it's a nice resume of the BCM43142 challenge in Ubuntu.



        Update



        I have just installed the above mentionned package, rebooted and I now have BT working and connecting to devices :)



        For readers who might face the same issue, here are some command output before installing the package:



        $ lsusb
        Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
        Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
        Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
        Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
        Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
        Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
        Bus 001 Device 003: ID 13d3:3388 IMC Networks
        Bus 001 Device 004: ID 13d3:5188 IMC Networks
        Bus 001 Device 005: ID 03eb:8417 Atmel Corp.

        $ lspci -nn
        02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)
        03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8162 Fast Ethernet [1969:1090] (rev 10)

        $ rfkill list
        0: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
        1: brcmwl-0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
        3: asus-wlan: Wireless LAN
        Soft blocked: no
        Hard blocked: no
        4: asus-bluetooth: Bluetooth
        Soft blocked: no
        Hard blocked: no
        5: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no

        $ hcitool dev
        Devices:
        hci0 DC:85:DE:AB:4D:38

        $ hciconfig
        hci0: Type: BR/EDR Bus: USB
        BD Address: DC:85:DE:AB:4D:38 ACL MTU: 1021:8 SCO MTU: 64:1
        UP RUNNING PSCAN
        RX bytes:549 acl:0 sco:0 events:31 errors:0
        TX bytes:1168 acl:0 sco:0 commands:31 errors:0

        $ sudo service bluetooth status
        bluetooth start/running, process 944

        $ dmesg | grep Blue
        [ 8.954020] Bluetooth: Core ver 2.16
        [ 8.954086] Bluetooth: HCI device and connection manager initialized
        [ 8.954096] Bluetooth: HCI socket layer initialized
        [ 8.954100] Bluetooth: L2CAP socket layer initialized
        [ 8.954114] Bluetooth: SCO socket layer initialized
        [ 10.975507] Bluetooth: hci0 command 0x1003 tx timeout
        [ 11.088728] Bluetooth: can't load firmware, may not work correctly
        [ 12.901647] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
        [ 12.901653] Bluetooth: BNEP filters: protocol multicast
        [ 12.901664] Bluetooth: BNEP socket layer initialized
        [ 12.909989] Bluetooth: RFCOMM TTY layer initialized
        [ 12.910004] Bluetooth: RFCOMM socket layer initialized
        [ 12.910007] Bluetooth: RFCOMM ver 1.11
        [ 15.226150] Bluetooth: hci0 command 0x1003 tx timeout
        [44180.125379] Bluetooth: can't load firmware, may not work correctly


        We can notice that firmware can be loaded as per last libe here above. But after having installing it and rebooting the computer... All Good :)



        $ dmesg | grep Blue
        [ 8.768600] Bluetooth: Core ver 2.16
        [ 8.768625] Bluetooth: HCI device and connection manager initialized
        [ 8.768634] Bluetooth: HCI socket layer initialized
        [ 8.768638] Bluetooth: L2CAP socket layer initialized
        [ 8.768644] Bluetooth: SCO socket layer initialized
        [ 8.989943] Bluetooth: can't load firmware, may not work correctly
        [ 13.036311] Bluetooth: RFCOMM TTY layer initialized
        [ 13.036327] Bluetooth: RFCOMM socket layer initialized
        [ 13.036330] Bluetooth: RFCOMM ver 1.11
        [ 13.037056] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
        [ 13.037059] Bluetooth: BNEP filters: protocol multicast
        [ 13.037064] Bluetooth: BNEP socket layer initialized


        wireless 13.10 bluetooth asus x202e broadcom bcm43142







        share|improve this answer














        share|improve this answer



        share|improve this answer








        edited May 2 '13 at 19:50

























        answered May 1 '13 at 10:53









        roshii

        11




        11






























            draft saved

            draft discarded




















































            Thanks for contributing an answer to Ask Ubuntu!


            • Please be sure to answer the question. Provide details and share your research!

            But avoid



            • Asking for help, clarification, or responding to other answers.

            • Making statements based on opinion; back them up with references or personal experience.


            To learn more, see our tips on writing great answers.





            Some of your past answers have not been well-received, and you're in danger of being blocked from answering.


            Please pay close attention to the following guidance:


            • Please be sure to answer the question. Provide details and share your research!

            But avoid



            • Asking for help, clarification, or responding to other answers.

            • Making statements based on opinion; back them up with references or personal experience.


            To learn more, see our tips on writing great answers.




            draft saved


            draft discarded














            StackExchange.ready(
            function () {
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f217590%2fdell-vostro-3560-with-bcm43142-adapter-bluetooth-doesnt-work%23new-answer', 'question_page');
            }
            );

            Post as a guest















            Required, but never shown





















































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown

































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown







            Popular posts from this blog

            數位音樂下載

            When can things happen in Etherscan, such as the picture below?

            格利澤436b