Failed installation 18.04.1
I've been trying to install Ubuntu 18.04.1 64-bit on an apparently healthy Seagate Pipeline HD (Model ST3320310CS) SATA HDD. Each time a dialog box tells me there is an "apt configuration problem" "An attempt to configure apt to install additional package from the CD failed". I am then told that the installation has failed. In the case of this Ubuntu installation I've been using a USB key, burnt via Unetbootin. Via this USB key, I can see that many Ubuntu files have been copied on to the HDD, but the installation refuses to complete. I also tried another USB live key, but the result was identical. For both USB keys, the sha256sum checks I did were successful.
I previously tried installing Ubuntu Mate 18.04.1 on the same HDD on 2 different 64-bit computers (with both a USB key and DVD) and the message I received was very similar to the one above.
I ran the hard drive DST short test from the BIOS and it passed. According to the screenshot for this HDD (taken via the Ubuntu live USB key) [NB AskUbuntu has refused to accept this png image in my post] , the assessment for the HDD is “ok”.
I’m totally perplexed why the installation won’t complete; I’ve installed Ubuntu, Lubuntu etc with no problems on many occasions in the past on used HDDs. However, I recently bought this problem HDD from a local dealer and although it didn’t come with any packaging, it looks unused. So I’m wondering if I have to format it in some way before trying to install? If so, I’m wondering how to proceed now with all the Ubuntu files that are already copied on to it?
Although I’ve gradually learned how to do some very rudimentary technical things on Ubuntu (like doing the sha256sum check and doing a few commands on Terminal), my know-how is still extremely limited. So bearing this in mind and that this HDD will only have Ubuntu installed on it (and NOT Windows), I wonder if you suggest that I try to follow the instructions on this Help page to install a new hard disk here?:
https://help.ubuntu.com/community/InstallingANewHardDrive
The above instructions are looking extremely daunting to me at the moment! So do you think I might find it easier to look at Seagate’s “DiscWizard” software (available online according to the sticker on the HDD) ?
Many thanks in advance for any replies.
enter image description here
hard-drive
asked Jan 10 at 15:40
IanIan
12
New contributor
Ian is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
I've been trying to install Ubuntu 18.04.1 64-bit on an apparently healthy Seagate Pipeline HD (Model ST3320310CS) SATA HDD. Each time a dialog box tells me there is an "apt configuration problem" "An attempt to configure apt to install additional package from the CD failed". I am then told that the installation has failed. In the case of this Ubuntu installation I've been using a USB key, burnt via Unetbootin. Via this USB key, I can see that many Ubuntu files have been copied on to the HDD, but the installation refuses to complete. I also tried another USB live key, but the result was identical. For both USB keys, the sha256sum checks I did were successful.
I previously tried installing Ubuntu Mate 18.04.1 on the same HDD on 2 different 64-bit computers (with both a USB key and DVD) and the message I received was very similar to the one above.
I ran the hard drive DST short test from the BIOS and it passed. According to the screenshot for this HDD (taken via the Ubuntu live USB key) [NB AskUbuntu has refused to accept this png image in my post] , the assessment for the HDD is “ok”.
I’m totally perplexed why the installation won’t complete; I’ve installed Ubuntu, Lubuntu etc with no problems on many occasions in the past on used HDDs. However, I recently bought this problem HDD from a local dealer and although it didn’t come with any packaging, it looks unused. So I’m wondering if I have to format it in some way before trying to install? If so, I’m wondering how to proceed now with all the Ubuntu files that are already copied on to it?
Although I’ve gradually learned how to do some very rudimentary technical things on Ubuntu (like doing the sha256sum check and doing a few commands on Terminal), my know-how is still extremely limited. So bearing this in mind and that this HDD will only have Ubuntu installed on it (and NOT Windows), I wonder if you suggest that I try to follow the instructions on this Help page to install a new hard disk here?:
https://help.ubuntu.com/community/InstallingANewHardDrive
The above instructions are looking extremely daunting to me at the moment! So do you think I might find it easier to look at Seagate’s “DiscWizard” software (available online according to the sticker on the HDD) ?
Many thanks in advance for any replies.
enter image description here
hard-drive
asked Jan 10 at 15:40
IanIan
12
New contributor
Ian is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
It seems you have run up against this problem: kubuntuforums.net/showthread.php/… Try another way to create a USB stick than UNetbootin.
– Jos
Jan 10 at 15:53
Thanks Jos, I'll study that link in depth later. I've already tried a DVD with UbuntuMate on it, but it was the same problem. When I get my hands on a different HDD and install Ubuntu on it with the USB stick, this would presumably confirm that the problem is with the HDD and not with the stick?
– Ian
Jan 10 at 18:48
add a comment |
I've been trying to install Ubuntu 18.04.1 64-bit on an apparently healthy Seagate Pipeline HD (Model ST3320310CS) SATA HDD. Each time a dialog box tells me there is an "apt configuration problem" "An attempt to configure apt to install additional package from the CD failed". I am then told that the installation has failed. In the case of this Ubuntu installation I've been using a USB key, burnt via Unetbootin. Via this USB key, I can see that many Ubuntu files have been copied on to the HDD, but the installation refuses to complete. I also tried another USB live key, but the result was identical. For both USB keys, the sha256sum checks I did were successful.
I previously tried installing Ubuntu Mate 18.04.1 on the same HDD on 2 different 64-bit computers (with both a USB key and DVD) and the message I received was very similar to the one above.
I ran the hard drive DST short test from the BIOS and it passed. According to the screenshot for this HDD (taken via the Ubuntu live USB key) [NB AskUbuntu has refused to accept this png image in my post] , the assessment for the HDD is “ok”.
I’m totally perplexed why the installation won’t complete; I’ve installed Ubuntu, Lubuntu etc with no problems on many occasions in the past on used HDDs. However, I recently bought this problem HDD from a local dealer and although it didn’t come with any packaging, it looks unused. So I’m wondering if I have to format it in some way before trying to install? If so, I’m wondering how to proceed now with all the Ubuntu files that are already copied on to it?
Although I’ve gradually learned how to do some very rudimentary technical things on Ubuntu (like doing the sha256sum check and doing a few commands on Terminal), my know-how is still extremely limited. So bearing this in mind and that this HDD will only have Ubuntu installed on it (and NOT Windows), I wonder if you suggest that I try to follow the instructions on this Help page to install a new hard disk here?:
https://help.ubuntu.com/community/InstallingANewHardDrive
The above instructions are looking extremely daunting to me at the moment! So do you think I might find it easier to look at Seagate’s “DiscWizard” software (available online according to the sticker on the HDD) ?
Many thanks in advance for any replies.
enter image description here
hard-drive
asked Jan 10 at 15:40
IanIan
12
New contributor
Ian is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
I've been trying to install Ubuntu 18.04.1 64-bit on an apparently healthy Seagate Pipeline HD (Model ST3320310CS) SATA HDD. Each time a dialog box tells me there is an "apt configuration problem" "An attempt to configure apt to install additional package from the CD failed". I am then told that the installation has failed. In the case of this Ubuntu installation I've been using a USB key, burnt via Unetbootin. Via this USB key, I can see that many Ubuntu files have been copied on to the HDD, but the installation refuses to complete. I also tried another USB live key, but the result was identical. For both USB keys, the sha256sum checks I did were successful.
I previously tried installing Ubuntu Mate 18.04.1 on the same HDD on 2 different 64-bit computers (with both a USB key and DVD) and the message I received was very similar to the one above.
I ran the hard drive DST short test from the BIOS and it passed. According to the screenshot for this HDD (taken via the Ubuntu live USB key) [NB AskUbuntu has refused to accept this png image in my post] , the assessment for the HDD is “ok”.
I’m totally perplexed why the installation won’t complete; I’ve installed Ubuntu, Lubuntu etc with no problems on many occasions in the past on used HDDs. However, I recently bought this problem HDD from a local dealer and although it didn’t come with any packaging, it looks unused. So I’m wondering if I have to format it in some way before trying to install? If so, I’m wondering how to proceed now with all the Ubuntu files that are already copied on to it?
Although I’ve gradually learned how to do some very rudimentary technical things on Ubuntu (like doing the sha256sum check and doing a few commands on Terminal), my know-how is still extremely limited. So bearing this in mind and that this HDD will only have Ubuntu installed on it (and NOT Windows), I wonder if you suggest that I try to follow the instructions on this Help page to install a new hard disk here?:
https://help.ubuntu.com/community/InstallingANewHardDrive
The above instructions are looking extremely daunting to me at the moment! So do you think I might find it easier to look at Seagate’s “DiscWizard” software (available online according to the sticker on the HDD) ?
Many thanks in advance for any replies.
enter image description here
hard-drive
hard-drive
asked Jan 10 at 15:40
IanIan
12
New contributor
Ian is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked Jan 10 at 15:40
IanIan
12
New contributor
Ian is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited Jan 10 at 15:46
Ian
asked Jan 10 at 15:40
IanIan
12
New contributor
Ian is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked Jan 10 at 15:40
IanIan
12
asked Jan 10 at 15:40
IanIan
12
12
New contributor
Ian is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Ian is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Ian is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
It seems you have run up against this problem: kubuntuforums.net/showthread.php/… Try another way to create a USB stick than UNetbootin.
– Jos
Jan 10 at 15:53
Thanks Jos, I'll study that link in depth later. I've already tried a DVD with UbuntuMate on it, but it was the same problem. When I get my hands on a different HDD and install Ubuntu on it with the USB stick, this would presumably confirm that the problem is with the HDD and not with the stick?
– Ian
Jan 10 at 18:48
add a comment |
It seems you have run up against this problem: kubuntuforums.net/showthread.php/… Try another way to create a USB stick than UNetbootin.
– Jos
Jan 10 at 15:53
Thanks Jos, I'll study that link in depth later. I've already tried a DVD with UbuntuMate on it, but it was the same problem. When I get my hands on a different HDD and install Ubuntu on it with the USB stick, this would presumably confirm that the problem is with the HDD and not with the stick?
– Ian
Jan 10 at 18:48
It seems you have run up against this problem: kubuntuforums.net/showthread.php/… Try another way to create a USB stick than UNetbootin.
– Jos
Jan 10 at 15:53
It seems you have run up against this problem: kubuntuforums.net/showthread.php/… Try another way to create a USB stick than UNetbootin.
– Jos
Jan 10 at 15:53
Thanks Jos, I'll study that link in depth later. I've already tried a DVD with UbuntuMate on it, but it was the same problem. When I get my hands on a different HDD and install Ubuntu on it with the USB stick, this would presumably confirm that the problem is with the HDD and not with the stick?
– Ian
Jan 10 at 18:48
Thanks Jos, I'll study that link in depth later. I've already tried a DVD with UbuntuMate on it, but it was the same problem. When I get my hands on a different HDD and install Ubuntu on it with the USB stick, this would presumably confirm that the problem is with the HDD and not with the stick?
– Ian
Jan 10 at 18:48
add a comment |
0
active
oldest
votes
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Ian is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1108617%2ffailed-installation-18-04-1%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
0
active
oldest
votes
0
active
oldest
votes
active
oldest
votes
active
oldest
votes
Ian is a new contributor. Be nice, and check out our Code of Conduct.
Ian is a new contributor. Be nice, and check out our Code of Conduct.
Ian is a new contributor. Be nice, and check out our Code of Conduct.
Ian is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1108617%2ffailed-installation-18-04-1%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
It seems you have run up against this problem: kubuntuforums.net/showthread.php/… Try another way to create a USB stick than UNetbootin.
– Jos
Jan 10 at 15:53
Thanks Jos, I'll study that link in depth later. I've already tried a DVD with UbuntuMate on it, but it was the same problem. When I get my hands on a different HDD and install Ubuntu on it with the USB stick, this would presumably confirm that the problem is with the HDD and not with the stick?
– Ian
Jan 10 at 18:48