Please identify these capacitors and values
$begingroup$
I'm tracing a circuit. What kind of capacitors are these yellow things? The upper one has markings of "105V 212K1", what does 212K1 stand for? The lower one has markings of "335V 136K4", what does 136K4 stand for?
capacitor identification
edited 2 hours ago
SamGibson
10.9k41537
asked 4 hours ago
JtlJtl
607
$endgroup$
add a comment |
$begingroup$
I'm tracing a circuit. What kind of capacitors are these yellow things? The upper one has markings of "105V 212K1", what does 212K1 stand for? The lower one has markings of "335V 136K4", what does 136K4 stand for?
capacitor identification
edited 2 hours ago
SamGibson
10.9k41537
asked 4 hours ago
JtlJtl
607
$endgroup$
2
$begingroup$
Hi, I've rolled-back your question to the previous version. You can't add more, different component types into this identification question. FYI, these are the current "Component Identification Question Guidelines". You can see that one component per question is stated there. (Your current question, with two similar capacitors, probably won't get rejected just because it has two components, as they are similar.)
$endgroup$
– SamGibson
1 hour ago
add a comment |
$begingroup$
I'm tracing a circuit. What kind of capacitors are these yellow things? The upper one has markings of "105V 212K1", what does 212K1 stand for? The lower one has markings of "335V 136K4", what does 136K4 stand for?
capacitor identification
edited 2 hours ago
SamGibson
10.9k41537
asked 4 hours ago
JtlJtl
607
$endgroup$
I'm tracing a circuit. What kind of capacitors are these yellow things? The upper one has markings of "105V 212K1", what does 212K1 stand for? The lower one has markings of "335V 136K4", what does 136K4 stand for?
capacitor identification
capacitor identification
edited 2 hours ago
SamGibson
10.9k41537
asked 4 hours ago
JtlJtl
607
edited 2 hours ago
SamGibson
10.9k41537
asked 4 hours ago
JtlJtl
607
edited 2 hours ago
SamGibson
10.9k41537
edited 2 hours ago
SamGibson
10.9k41537
edited 2 hours ago
SamGibson
10.9k41537
10.9k41537
asked 4 hours ago
JtlJtl
607
asked 4 hours ago
JtlJtl
607
asked 4 hours ago
JtlJtl
607
607
2
$begingroup$
Hi, I've rolled-back your question to the previous version. You can't add more, different component types into this identification question. FYI, these are the current "Component Identification Question Guidelines". You can see that one component per question is stated there. (Your current question, with two similar capacitors, probably won't get rejected just because it has two components, as they are similar.)
$endgroup$
– SamGibson
1 hour ago
add a comment |
2
$begingroup$
Hi, I've rolled-back your question to the previous version. You can't add more, different component types into this identification question. FYI, these are the current "Component Identification Question Guidelines". You can see that one component per question is stated there. (Your current question, with two similar capacitors, probably won't get rejected just because it has two components, as they are similar.)
$endgroup$
– SamGibson
1 hour ago
2
2
$begingroup$
Hi, I've rolled-back your question to the previous version. You can't add more, different component types into this identification question. FYI, these are the current "Component Identification Question Guidelines". You can see that one component per question is stated there. (Your current question, with two similar capacitors, probably won't get rejected just because it has two components, as they are similar.)
$endgroup$
– SamGibson
1 hour ago
$begingroup$
Hi, I've rolled-back your question to the previous version. You can't add more, different component types into this identification question. FYI, these are the current "Component Identification Question Guidelines". You can see that one component per question is stated there. (Your current question, with two similar capacitors, probably won't get rejected just because it has two components, as they are similar.)
$endgroup$
– SamGibson
1 hour ago
add a comment |
2 Answers
2
active
oldest
votes
$begingroup$
335 = 3.3 uF. 105 = 1.0 uF.
Those are dry tantalum electrolytics. The end with the solid bar is the + (anode) connection. The mitered corners of the upper decal also indicate the + end of a capacitor.
The lower capacitor was not intended to be an electrolytic; it was changed to one after the board design was completed. That is why the solder pads are smaller, the decal is not mitered, and the part overhangs the courtyard (the sides of the decal).
answered 3 hours ago
AnalogKidAnalogKid
1,70125
$endgroup$
$begingroup$
I thought V means voltage. But what does the 212K1 and 136K4 mean?
$endgroup$
– Jtl
3 hours ago
1
$begingroup$
@Jtl The letter after the value is usually a tolerance code. V is a rare one, but from what I can see it means -0%/+100%; in other words, the manufacturer guarantees that the measured capacitance will be no less than the rated value and no more than twice the rated value.
$endgroup$
– Hearth
3 hours ago
2
$begingroup$
I suspect the 212K1 and 136K4 are date or lot codes, although they may encode something more useful. This guide looks informative, but be warned that it's just what came out at the top of a casual search.
$endgroup$
– TimWescott
3 hours ago
add a comment |
$begingroup$
The top shows the value, 105 = 1uF the bottom shows Mfg date code/factory code V =2924 SMD size Tantalum eg https://www.digikey.com/product-detail/en/avx-corporation/TAJA105K016RNJ/478-1649-1-ND/564681
answered 1 hour ago
Sunnyskyguy EE75Sunnyskyguy EE75
63.7k22194
$endgroup$
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
return StackExchange.using("mathjaxEditing", function () {
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["\$", "\$"]]);
});
});
}, "mathjax-editing");
StackExchange.ifUsing("editor", function () {
return StackExchange.using("schematics", function () {
StackExchange.schematics.init();
});
}, "cicuitlab");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "135"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f417004%2fplease-identify-these-capacitors-and-values%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
335 = 3.3 uF. 105 = 1.0 uF.
Those are dry tantalum electrolytics. The end with the solid bar is the + (anode) connection. The mitered corners of the upper decal also indicate the + end of a capacitor.
The lower capacitor was not intended to be an electrolytic; it was changed to one after the board design was completed. That is why the solder pads are smaller, the decal is not mitered, and the part overhangs the courtyard (the sides of the decal).
answered 3 hours ago
AnalogKidAnalogKid
1,70125
$endgroup$
$begingroup$
I thought V means voltage. But what does the 212K1 and 136K4 mean?
$endgroup$
– Jtl
3 hours ago
1
$begingroup$
@Jtl The letter after the value is usually a tolerance code. V is a rare one, but from what I can see it means -0%/+100%; in other words, the manufacturer guarantees that the measured capacitance will be no less than the rated value and no more than twice the rated value.
$endgroup$
– Hearth
3 hours ago
2
$begingroup$
I suspect the 212K1 and 136K4 are date or lot codes, although they may encode something more useful. This guide looks informative, but be warned that it's just what came out at the top of a casual search.
$endgroup$
– TimWescott
3 hours ago
add a comment |
$begingroup$
335 = 3.3 uF. 105 = 1.0 uF.
Those are dry tantalum electrolytics. The end with the solid bar is the + (anode) connection. The mitered corners of the upper decal also indicate the + end of a capacitor.
The lower capacitor was not intended to be an electrolytic; it was changed to one after the board design was completed. That is why the solder pads are smaller, the decal is not mitered, and the part overhangs the courtyard (the sides of the decal).
answered 3 hours ago
AnalogKidAnalogKid
1,70125
$endgroup$
$begingroup$
I thought V means voltage. But what does the 212K1 and 136K4 mean?
$endgroup$
– Jtl
3 hours ago
1
$begingroup$
@Jtl The letter after the value is usually a tolerance code. V is a rare one, but from what I can see it means -0%/+100%; in other words, the manufacturer guarantees that the measured capacitance will be no less than the rated value and no more than twice the rated value.
$endgroup$
– Hearth
3 hours ago
2
$begingroup$
I suspect the 212K1 and 136K4 are date or lot codes, although they may encode something more useful. This guide looks informative, but be warned that it's just what came out at the top of a casual search.
$endgroup$
– TimWescott
3 hours ago
add a comment |
$begingroup$
335 = 3.3 uF. 105 = 1.0 uF.
Those are dry tantalum electrolytics. The end with the solid bar is the + (anode) connection. The mitered corners of the upper decal also indicate the + end of a capacitor.
The lower capacitor was not intended to be an electrolytic; it was changed to one after the board design was completed. That is why the solder pads are smaller, the decal is not mitered, and the part overhangs the courtyard (the sides of the decal).
answered 3 hours ago
AnalogKidAnalogKid
1,70125
$endgroup$
335 = 3.3 uF. 105 = 1.0 uF.
Those are dry tantalum electrolytics. The end with the solid bar is the + (anode) connection. The mitered corners of the upper decal also indicate the + end of a capacitor.
The lower capacitor was not intended to be an electrolytic; it was changed to one after the board design was completed. That is why the solder pads are smaller, the decal is not mitered, and the part overhangs the courtyard (the sides of the decal).
answered 3 hours ago
AnalogKidAnalogKid
1,70125
answered 3 hours ago
AnalogKidAnalogKid
1,70125
answered 3 hours ago
AnalogKidAnalogKid
1,70125
answered 3 hours ago
AnalogKidAnalogKid
1,70125
1,70125
$begingroup$
I thought V means voltage. But what does the 212K1 and 136K4 mean?
$endgroup$
– Jtl
3 hours ago
1
$begingroup$
@Jtl The letter after the value is usually a tolerance code. V is a rare one, but from what I can see it means -0%/+100%; in other words, the manufacturer guarantees that the measured capacitance will be no less than the rated value and no more than twice the rated value.
$endgroup$
– Hearth
3 hours ago
2
$begingroup$
I suspect the 212K1 and 136K4 are date or lot codes, although they may encode something more useful. This guide looks informative, but be warned that it's just what came out at the top of a casual search.
$endgroup$
– TimWescott
3 hours ago
add a comment |
$begingroup$
I thought V means voltage. But what does the 212K1 and 136K4 mean?
$endgroup$
– Jtl
3 hours ago
1
$begingroup$
@Jtl The letter after the value is usually a tolerance code. V is a rare one, but from what I can see it means -0%/+100%; in other words, the manufacturer guarantees that the measured capacitance will be no less than the rated value and no more than twice the rated value.
$endgroup$
– Hearth
3 hours ago
2
$begingroup$
I suspect the 212K1 and 136K4 are date or lot codes, although they may encode something more useful. This guide looks informative, but be warned that it's just what came out at the top of a casual search.
$endgroup$
– TimWescott
3 hours ago
$begingroup$
I thought V means voltage. But what does the 212K1 and 136K4 mean?
$endgroup$
– Jtl
3 hours ago
$begingroup$
I thought V means voltage. But what does the 212K1 and 136K4 mean?
$endgroup$
– Jtl
3 hours ago
1
1
$begingroup$
@Jtl The letter after the value is usually a tolerance code. V is a rare one, but from what I can see it means -0%/+100%; in other words, the manufacturer guarantees that the measured capacitance will be no less than the rated value and no more than twice the rated value.
$endgroup$
– Hearth
3 hours ago
$begingroup$
@Jtl The letter after the value is usually a tolerance code. V is a rare one, but from what I can see it means -0%/+100%; in other words, the manufacturer guarantees that the measured capacitance will be no less than the rated value and no more than twice the rated value.
$endgroup$
– Hearth
3 hours ago
2
2
$begingroup$
I suspect the 212K1 and 136K4 are date or lot codes, although they may encode something more useful. This guide looks informative, but be warned that it's just what came out at the top of a casual search.
$endgroup$
– TimWescott
3 hours ago
$begingroup$
I suspect the 212K1 and 136K4 are date or lot codes, although they may encode something more useful. This guide looks informative, but be warned that it's just what came out at the top of a casual search.
$endgroup$
– TimWescott
3 hours ago
add a comment |
$begingroup$
The top shows the value, 105 = 1uF the bottom shows Mfg date code/factory code V =2924 SMD size Tantalum eg https://www.digikey.com/product-detail/en/avx-corporation/TAJA105K016RNJ/478-1649-1-ND/564681
answered 1 hour ago
Sunnyskyguy EE75Sunnyskyguy EE75
63.7k22194
$endgroup$
add a comment |
$begingroup$
The top shows the value, 105 = 1uF the bottom shows Mfg date code/factory code V =2924 SMD size Tantalum eg https://www.digikey.com/product-detail/en/avx-corporation/TAJA105K016RNJ/478-1649-1-ND/564681
answered 1 hour ago
Sunnyskyguy EE75Sunnyskyguy EE75
63.7k22194
$endgroup$
add a comment |
$begingroup$
The top shows the value, 105 = 1uF the bottom shows Mfg date code/factory code V =2924 SMD size Tantalum eg https://www.digikey.com/product-detail/en/avx-corporation/TAJA105K016RNJ/478-1649-1-ND/564681
answered 1 hour ago
Sunnyskyguy EE75Sunnyskyguy EE75
63.7k22194
$endgroup$
The top shows the value, 105 = 1uF the bottom shows Mfg date code/factory code V =2924 SMD size Tantalum eg https://www.digikey.com/product-detail/en/avx-corporation/TAJA105K016RNJ/478-1649-1-ND/564681
answered 1 hour ago
Sunnyskyguy EE75Sunnyskyguy EE75
63.7k22194
answered 1 hour ago
Sunnyskyguy EE75Sunnyskyguy EE75
63.7k22194
answered 1 hour ago
Sunnyskyguy EE75Sunnyskyguy EE75
63.7k22194
answered 1 hour ago
Sunnyskyguy EE75Sunnyskyguy EE75
63.7k22194
63.7k22194
add a comment |
add a comment |
Thanks for contributing an answer to Electrical Engineering Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f417004%2fplease-identify-these-capacitors-and-values%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
2
$begingroup$
Hi, I've rolled-back your question to the previous version. You can't add more, different component types into this identification question. FYI, these are the current "Component Identification Question Guidelines". You can see that one component per question is stated there. (Your current question, with two similar capacitors, probably won't get rejected just because it has two components, as they are similar.)
$endgroup$
– SamGibson
1 hour ago