Black screen when trying to install ubuntu 13.10











up vote
4
down vote

favorite
1












I am in need of some help. It has been 2 weeks since I bought my first ever windows laptop with the aim of replacing windows but I have been unsuccessful.



The hardware is as follows :
Asus 15' F550D with A8 AMD processor and Radeon HD 8670M graphics
The laptops runs EFI "bios"



I managed to switch off Fastboot and Secure boot in EFI



so far I managed to to boot from USB which I mounted the Ubuntu 13.10 on but I can not get pass the GRUB menu as no matter when I chose I end up facing a black screen with back light on and I can not get anywhere beyond that.



I have tried the following with no success:




  • alternative versions of ubuntu ( 13.04 , 12.10 and Kubuntu 13.10 {all 64 bit}) problem remains.


  • editing the boot options in grub and using "nomodeset"



what can I try next ? any other suggestions ?



please help Windows 8 is sucking life out of me !!!



In a perfect world I would be aiming to have a dual boot system but if it's easier to lose the big virus living in my system , Windows 8, then i'm more than happy to go with that . ...










share|improve this question
























  • You could try installing via a command line MinimalCD, but Ubuntu might not work after the install... I also believe that this can be done by another computer connected remotely :-s
    – Wilf
    Dec 21 '13 at 0:06












  • I got around it by connecting to external monitor.
    – user230406
    Dec 31 '13 at 12:44












  • possible duplicate of My computer boots to a black screen, what options do I have to fix it?
    – Tim
    May 27 '15 at 21:41










  • the potential issues are the partitioning sheme: you cannot boot"mbr" partitions on a "GPT" partitioned machine and vice versa. this partitioning can be set with multiarch installer usb but setting it is not the issue, rather matching it but let's set that asside a second it's possible the bootable usb you make are borked. try using (under windows) Rufus rufus.akeo.ie to make your ubuntu installer. it's the cleanest way I know of. also check your isos against checksums and consider newer (supported) versions of ubuntu. is there any reason why you're not getting the latest : AKA 17.04?
    – tatsu
    May 15 '17 at 9:20















up vote
4
down vote

favorite
1












I am in need of some help. It has been 2 weeks since I bought my first ever windows laptop with the aim of replacing windows but I have been unsuccessful.



The hardware is as follows :
Asus 15' F550D with A8 AMD processor and Radeon HD 8670M graphics
The laptops runs EFI "bios"



I managed to switch off Fastboot and Secure boot in EFI



so far I managed to to boot from USB which I mounted the Ubuntu 13.10 on but I can not get pass the GRUB menu as no matter when I chose I end up facing a black screen with back light on and I can not get anywhere beyond that.



I have tried the following with no success:




  • alternative versions of ubuntu ( 13.04 , 12.10 and Kubuntu 13.10 {all 64 bit}) problem remains.


  • editing the boot options in grub and using "nomodeset"



what can I try next ? any other suggestions ?



please help Windows 8 is sucking life out of me !!!



In a perfect world I would be aiming to have a dual boot system but if it's easier to lose the big virus living in my system , Windows 8, then i'm more than happy to go with that . ...










share|improve this question
























  • You could try installing via a command line MinimalCD, but Ubuntu might not work after the install... I also believe that this can be done by another computer connected remotely :-s
    – Wilf
    Dec 21 '13 at 0:06












  • I got around it by connecting to external monitor.
    – user230406
    Dec 31 '13 at 12:44












  • possible duplicate of My computer boots to a black screen, what options do I have to fix it?
    – Tim
    May 27 '15 at 21:41










  • the potential issues are the partitioning sheme: you cannot boot"mbr" partitions on a "GPT" partitioned machine and vice versa. this partitioning can be set with multiarch installer usb but setting it is not the issue, rather matching it but let's set that asside a second it's possible the bootable usb you make are borked. try using (under windows) Rufus rufus.akeo.ie to make your ubuntu installer. it's the cleanest way I know of. also check your isos against checksums and consider newer (supported) versions of ubuntu. is there any reason why you're not getting the latest : AKA 17.04?
    – tatsu
    May 15 '17 at 9:20













up vote
4
down vote

favorite
1









up vote
4
down vote

favorite
1






1





I am in need of some help. It has been 2 weeks since I bought my first ever windows laptop with the aim of replacing windows but I have been unsuccessful.



The hardware is as follows :
Asus 15' F550D with A8 AMD processor and Radeon HD 8670M graphics
The laptops runs EFI "bios"



I managed to switch off Fastboot and Secure boot in EFI



so far I managed to to boot from USB which I mounted the Ubuntu 13.10 on but I can not get pass the GRUB menu as no matter when I chose I end up facing a black screen with back light on and I can not get anywhere beyond that.



I have tried the following with no success:




  • alternative versions of ubuntu ( 13.04 , 12.10 and Kubuntu 13.10 {all 64 bit}) problem remains.


  • editing the boot options in grub and using "nomodeset"



what can I try next ? any other suggestions ?



please help Windows 8 is sucking life out of me !!!



In a perfect world I would be aiming to have a dual boot system but if it's easier to lose the big virus living in my system , Windows 8, then i'm more than happy to go with that . ...










share|improve this question















I am in need of some help. It has been 2 weeks since I bought my first ever windows laptop with the aim of replacing windows but I have been unsuccessful.



The hardware is as follows :
Asus 15' F550D with A8 AMD processor and Radeon HD 8670M graphics
The laptops runs EFI "bios"



I managed to switch off Fastboot and Secure boot in EFI



so far I managed to to boot from USB which I mounted the Ubuntu 13.10 on but I can not get pass the GRUB menu as no matter when I chose I end up facing a black screen with back light on and I can not get anywhere beyond that.



I have tried the following with no success:




  • alternative versions of ubuntu ( 13.04 , 12.10 and Kubuntu 13.10 {all 64 bit}) problem remains.


  • editing the boot options in grub and using "nomodeset"



what can I try next ? any other suggestions ?



please help Windows 8 is sucking life out of me !!!



In a perfect world I would be aiming to have a dual boot system but if it's easier to lose the big virus living in my system , Windows 8, then i'm more than happy to go with that . ...







boot grub2 system-installation uefi






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited May 27 '15 at 21:40









Tim

19.5k1484138




19.5k1484138










asked Dec 20 '13 at 23:09









user226347

2112




2112












  • You could try installing via a command line MinimalCD, but Ubuntu might not work after the install... I also believe that this can be done by another computer connected remotely :-s
    – Wilf
    Dec 21 '13 at 0:06












  • I got around it by connecting to external monitor.
    – user230406
    Dec 31 '13 at 12:44












  • possible duplicate of My computer boots to a black screen, what options do I have to fix it?
    – Tim
    May 27 '15 at 21:41










  • the potential issues are the partitioning sheme: you cannot boot"mbr" partitions on a "GPT" partitioned machine and vice versa. this partitioning can be set with multiarch installer usb but setting it is not the issue, rather matching it but let's set that asside a second it's possible the bootable usb you make are borked. try using (under windows) Rufus rufus.akeo.ie to make your ubuntu installer. it's the cleanest way I know of. also check your isos against checksums and consider newer (supported) versions of ubuntu. is there any reason why you're not getting the latest : AKA 17.04?
    – tatsu
    May 15 '17 at 9:20


















  • You could try installing via a command line MinimalCD, but Ubuntu might not work after the install... I also believe that this can be done by another computer connected remotely :-s
    – Wilf
    Dec 21 '13 at 0:06












  • I got around it by connecting to external monitor.
    – user230406
    Dec 31 '13 at 12:44












  • possible duplicate of My computer boots to a black screen, what options do I have to fix it?
    – Tim
    May 27 '15 at 21:41










  • the potential issues are the partitioning sheme: you cannot boot"mbr" partitions on a "GPT" partitioned machine and vice versa. this partitioning can be set with multiarch installer usb but setting it is not the issue, rather matching it but let's set that asside a second it's possible the bootable usb you make are borked. try using (under windows) Rufus rufus.akeo.ie to make your ubuntu installer. it's the cleanest way I know of. also check your isos against checksums and consider newer (supported) versions of ubuntu. is there any reason why you're not getting the latest : AKA 17.04?
    – tatsu
    May 15 '17 at 9:20
















You could try installing via a command line MinimalCD, but Ubuntu might not work after the install... I also believe that this can be done by another computer connected remotely :-s
– Wilf
Dec 21 '13 at 0:06






You could try installing via a command line MinimalCD, but Ubuntu might not work after the install... I also believe that this can be done by another computer connected remotely :-s
– Wilf
Dec 21 '13 at 0:06














I got around it by connecting to external monitor.
– user230406
Dec 31 '13 at 12:44






I got around it by connecting to external monitor.
– user230406
Dec 31 '13 at 12:44














possible duplicate of My computer boots to a black screen, what options do I have to fix it?
– Tim
May 27 '15 at 21:41




possible duplicate of My computer boots to a black screen, what options do I have to fix it?
– Tim
May 27 '15 at 21:41












the potential issues are the partitioning sheme: you cannot boot"mbr" partitions on a "GPT" partitioned machine and vice versa. this partitioning can be set with multiarch installer usb but setting it is not the issue, rather matching it but let's set that asside a second it's possible the bootable usb you make are borked. try using (under windows) Rufus rufus.akeo.ie to make your ubuntu installer. it's the cleanest way I know of. also check your isos against checksums and consider newer (supported) versions of ubuntu. is there any reason why you're not getting the latest : AKA 17.04?
– tatsu
May 15 '17 at 9:20




the potential issues are the partitioning sheme: you cannot boot"mbr" partitions on a "GPT" partitioned machine and vice versa. this partitioning can be set with multiarch installer usb but setting it is not the issue, rather matching it but let's set that asside a second it's possible the bootable usb you make are borked. try using (under windows) Rufus rufus.akeo.ie to make your ubuntu installer. it's the cleanest way I know of. also check your isos against checksums and consider newer (supported) versions of ubuntu. is there any reason why you're not getting the latest : AKA 17.04?
– tatsu
May 15 '17 at 9:20










4 Answers
4






active

oldest

votes

















up vote
0
down vote













This may sound stupid, but I think I may have (had) similar problem with my new Windows 8 preinstalled Lenovo G710 laptop. Here it is simply that after booting Ubuntu or - for example - GParted Live CD, the screen brightness is automatically set to zero. On this particular laptop I use I can control brightness by F11/F12 (or Fn+F11/Fn+F12 depending on BIOS setup's switch). I'm sorry if I misunderstood your problem.



Edit: not "set to zero brightness" but screen set off and therefore not F12 but F9 here ;).






share|improve this answer

















  • 1




    zero backlight and black screen is not the same.
    – Alvar
    Dec 21 '13 at 1:45










  • I wish it was as simple as that .. I have tied no to success ... thanks for your reply ...
    – user226347
    Dec 21 '13 at 4:56










  • has anyone got any other ideas ? solutions ?
    – user226347
    Dec 21 '13 at 20:47


















up vote
0
down vote













I have the same problem. I put in the CD, get the little install logo, then the screen goes black.



It has to do with the Radeon graphics card. When I install Puppy Slack, it works, but other distros just go to black screens. Can't even get to a point where I can uninstall NVIDIA.



I found a solution here:
http://turriebuntu.wordpress.com/general-ubuntu-pages/ubuntu-boot-freeze-lockup-it-stops-with-a-blank-purple-or-black-screen/



Copied and pasted just in case the link goes down:



Installed Ubuntu lockup
After you’ve installed Ubuntu the lockup is likely to return. The workaround is slightly different. Start your computer, and press the Shift when booting up, to get the Grub menu. Use the arrow keys to navigate/highlight the entry you want (it’s usually the first one).



Press “e” to get into edit mode. then look for the line containing “



.... quiet splash ....



using the arro keys move your cursor just past this point and enter the word nomodeset so that you now have:



.... quiet splash nomodeset ........



and press



Ctrl-x



to continue booting.



At that point you will need to make the change permanent. Open a terminal and:



gksudo gedit /etc/default/grub



Find this line:



GRUB_CMDLINE_LINUX_DEFAULT=”quiet splash”



and modify it to give:



GRUB_CMDLINE_LINUX_DEFAULT=”quiet splash nomodeset″



Save your changes close gedit and run:



sudo update-grub



At that point and you should no longer freeze during bootup.






share|improve this answer























  • As this is not a constructive answer, please consider posting informations like these as a comment in the future.
    – Daniel W.
    Mar 10 '14 at 14:47










  • Understood. My bad. I'm going to edit it to include new information that's actually helpful.
    – Velli
    Mar 11 '14 at 23:06


















up vote
0
down vote













In my case it turned out to be the built-in video drivers dropping the screen backlight brightness down to zero.



I had attempted to install Linux Mint 17.1 and Linux Mint 201403 on a Lenovo G710. Simply using the keyboard controls to adjust the screen brightness allowed me to continue with the install.



The answer from user227444 was helpful in this scenario.



If the issue is due to kernal mod incompatibility it may be wise to explicitly specify the mod to use in the grub startup script as defined here: http://community.linuxmint.com/tutorial/view/842






share|improve this answer




























    up vote
    0
    down vote













    If You have BIOS with UEFI/EFI You should disable this option in it (BIOS menu -> boot options) - than You will be able to use Your external OS on USB to install it in on Your hard drive.






    share|improve this answer





















      Your Answer








      StackExchange.ready(function() {
      var channelOptions = {
      tags: "".split(" "),
      id: "89"
      };
      initTagRenderer("".split(" "), "".split(" "), channelOptions);

      StackExchange.using("externalEditor", function() {
      // Have to fire editor after snippets, if snippets enabled
      if (StackExchange.settings.snippets.snippetsEnabled) {
      StackExchange.using("snippets", function() {
      createEditor();
      });
      }
      else {
      createEditor();
      }
      });

      function createEditor() {
      StackExchange.prepareEditor({
      heartbeatType: 'answer',
      convertImagesToLinks: true,
      noModals: true,
      showLowRepImageUploadWarning: true,
      reputationToPostImages: 10,
      bindNavPrevention: true,
      postfix: "",
      imageUploader: {
      brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
      contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
      allowUrls: true
      },
      onDemand: true,
      discardSelector: ".discard-answer"
      ,immediatelyShowMarkdownHelp:true
      });


      }
      });














      draft saved

      draft discarded


















      StackExchange.ready(
      function () {
      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f393695%2fblack-screen-when-trying-to-install-ubuntu-13-10%23new-answer', 'question_page');
      }
      );

      Post as a guest















      Required, but never shown

























      4 Answers
      4






      active

      oldest

      votes








      4 Answers
      4






      active

      oldest

      votes









      active

      oldest

      votes






      active

      oldest

      votes








      up vote
      0
      down vote













      This may sound stupid, but I think I may have (had) similar problem with my new Windows 8 preinstalled Lenovo G710 laptop. Here it is simply that after booting Ubuntu or - for example - GParted Live CD, the screen brightness is automatically set to zero. On this particular laptop I use I can control brightness by F11/F12 (or Fn+F11/Fn+F12 depending on BIOS setup's switch). I'm sorry if I misunderstood your problem.



      Edit: not "set to zero brightness" but screen set off and therefore not F12 but F9 here ;).






      share|improve this answer

















      • 1




        zero backlight and black screen is not the same.
        – Alvar
        Dec 21 '13 at 1:45










      • I wish it was as simple as that .. I have tied no to success ... thanks for your reply ...
        – user226347
        Dec 21 '13 at 4:56










      • has anyone got any other ideas ? solutions ?
        – user226347
        Dec 21 '13 at 20:47















      up vote
      0
      down vote













      This may sound stupid, but I think I may have (had) similar problem with my new Windows 8 preinstalled Lenovo G710 laptop. Here it is simply that after booting Ubuntu or - for example - GParted Live CD, the screen brightness is automatically set to zero. On this particular laptop I use I can control brightness by F11/F12 (or Fn+F11/Fn+F12 depending on BIOS setup's switch). I'm sorry if I misunderstood your problem.



      Edit: not "set to zero brightness" but screen set off and therefore not F12 but F9 here ;).






      share|improve this answer

















      • 1




        zero backlight and black screen is not the same.
        – Alvar
        Dec 21 '13 at 1:45










      • I wish it was as simple as that .. I have tied no to success ... thanks for your reply ...
        – user226347
        Dec 21 '13 at 4:56










      • has anyone got any other ideas ? solutions ?
        – user226347
        Dec 21 '13 at 20:47













      up vote
      0
      down vote










      up vote
      0
      down vote









      This may sound stupid, but I think I may have (had) similar problem with my new Windows 8 preinstalled Lenovo G710 laptop. Here it is simply that after booting Ubuntu or - for example - GParted Live CD, the screen brightness is automatically set to zero. On this particular laptop I use I can control brightness by F11/F12 (or Fn+F11/Fn+F12 depending on BIOS setup's switch). I'm sorry if I misunderstood your problem.



      Edit: not "set to zero brightness" but screen set off and therefore not F12 but F9 here ;).






      share|improve this answer












      This may sound stupid, but I think I may have (had) similar problem with my new Windows 8 preinstalled Lenovo G710 laptop. Here it is simply that after booting Ubuntu or - for example - GParted Live CD, the screen brightness is automatically set to zero. On this particular laptop I use I can control brightness by F11/F12 (or Fn+F11/Fn+F12 depending on BIOS setup's switch). I'm sorry if I misunderstood your problem.



      Edit: not "set to zero brightness" but screen set off and therefore not F12 but F9 here ;).







      share|improve this answer












      share|improve this answer



      share|improve this answer










      answered Dec 21 '13 at 1:21







      user227444















      • 1




        zero backlight and black screen is not the same.
        – Alvar
        Dec 21 '13 at 1:45










      • I wish it was as simple as that .. I have tied no to success ... thanks for your reply ...
        – user226347
        Dec 21 '13 at 4:56










      • has anyone got any other ideas ? solutions ?
        – user226347
        Dec 21 '13 at 20:47














      • 1




        zero backlight and black screen is not the same.
        – Alvar
        Dec 21 '13 at 1:45










      • I wish it was as simple as that .. I have tied no to success ... thanks for your reply ...
        – user226347
        Dec 21 '13 at 4:56










      • has anyone got any other ideas ? solutions ?
        – user226347
        Dec 21 '13 at 20:47








      1




      1




      zero backlight and black screen is not the same.
      – Alvar
      Dec 21 '13 at 1:45




      zero backlight and black screen is not the same.
      – Alvar
      Dec 21 '13 at 1:45












      I wish it was as simple as that .. I have tied no to success ... thanks for your reply ...
      – user226347
      Dec 21 '13 at 4:56




      I wish it was as simple as that .. I have tied no to success ... thanks for your reply ...
      – user226347
      Dec 21 '13 at 4:56












      has anyone got any other ideas ? solutions ?
      – user226347
      Dec 21 '13 at 20:47




      has anyone got any other ideas ? solutions ?
      – user226347
      Dec 21 '13 at 20:47












      up vote
      0
      down vote













      I have the same problem. I put in the CD, get the little install logo, then the screen goes black.



      It has to do with the Radeon graphics card. When I install Puppy Slack, it works, but other distros just go to black screens. Can't even get to a point where I can uninstall NVIDIA.



      I found a solution here:
      http://turriebuntu.wordpress.com/general-ubuntu-pages/ubuntu-boot-freeze-lockup-it-stops-with-a-blank-purple-or-black-screen/



      Copied and pasted just in case the link goes down:



      Installed Ubuntu lockup
      After you’ve installed Ubuntu the lockup is likely to return. The workaround is slightly different. Start your computer, and press the Shift when booting up, to get the Grub menu. Use the arrow keys to navigate/highlight the entry you want (it’s usually the first one).



      Press “e” to get into edit mode. then look for the line containing “



      .... quiet splash ....



      using the arro keys move your cursor just past this point and enter the word nomodeset so that you now have:



      .... quiet splash nomodeset ........



      and press



      Ctrl-x



      to continue booting.



      At that point you will need to make the change permanent. Open a terminal and:



      gksudo gedit /etc/default/grub



      Find this line:



      GRUB_CMDLINE_LINUX_DEFAULT=”quiet splash”



      and modify it to give:



      GRUB_CMDLINE_LINUX_DEFAULT=”quiet splash nomodeset″



      Save your changes close gedit and run:



      sudo update-grub



      At that point and you should no longer freeze during bootup.






      share|improve this answer























      • As this is not a constructive answer, please consider posting informations like these as a comment in the future.
        – Daniel W.
        Mar 10 '14 at 14:47










      • Understood. My bad. I'm going to edit it to include new information that's actually helpful.
        – Velli
        Mar 11 '14 at 23:06















      up vote
      0
      down vote













      I have the same problem. I put in the CD, get the little install logo, then the screen goes black.



      It has to do with the Radeon graphics card. When I install Puppy Slack, it works, but other distros just go to black screens. Can't even get to a point where I can uninstall NVIDIA.



      I found a solution here:
      http://turriebuntu.wordpress.com/general-ubuntu-pages/ubuntu-boot-freeze-lockup-it-stops-with-a-blank-purple-or-black-screen/



      Copied and pasted just in case the link goes down:



      Installed Ubuntu lockup
      After you’ve installed Ubuntu the lockup is likely to return. The workaround is slightly different. Start your computer, and press the Shift when booting up, to get the Grub menu. Use the arrow keys to navigate/highlight the entry you want (it’s usually the first one).



      Press “e” to get into edit mode. then look for the line containing “



      .... quiet splash ....



      using the arro keys move your cursor just past this point and enter the word nomodeset so that you now have:



      .... quiet splash nomodeset ........



      and press



      Ctrl-x



      to continue booting.



      At that point you will need to make the change permanent. Open a terminal and:



      gksudo gedit /etc/default/grub



      Find this line:



      GRUB_CMDLINE_LINUX_DEFAULT=”quiet splash”



      and modify it to give:



      GRUB_CMDLINE_LINUX_DEFAULT=”quiet splash nomodeset″



      Save your changes close gedit and run:



      sudo update-grub



      At that point and you should no longer freeze during bootup.






      share|improve this answer























      • As this is not a constructive answer, please consider posting informations like these as a comment in the future.
        – Daniel W.
        Mar 10 '14 at 14:47










      • Understood. My bad. I'm going to edit it to include new information that's actually helpful.
        – Velli
        Mar 11 '14 at 23:06













      up vote
      0
      down vote










      up vote
      0
      down vote









      I have the same problem. I put in the CD, get the little install logo, then the screen goes black.



      It has to do with the Radeon graphics card. When I install Puppy Slack, it works, but other distros just go to black screens. Can't even get to a point where I can uninstall NVIDIA.



      I found a solution here:
      http://turriebuntu.wordpress.com/general-ubuntu-pages/ubuntu-boot-freeze-lockup-it-stops-with-a-blank-purple-or-black-screen/



      Copied and pasted just in case the link goes down:



      Installed Ubuntu lockup
      After you’ve installed Ubuntu the lockup is likely to return. The workaround is slightly different. Start your computer, and press the Shift when booting up, to get the Grub menu. Use the arrow keys to navigate/highlight the entry you want (it’s usually the first one).



      Press “e” to get into edit mode. then look for the line containing “



      .... quiet splash ....



      using the arro keys move your cursor just past this point and enter the word nomodeset so that you now have:



      .... quiet splash nomodeset ........



      and press



      Ctrl-x



      to continue booting.



      At that point you will need to make the change permanent. Open a terminal and:



      gksudo gedit /etc/default/grub



      Find this line:



      GRUB_CMDLINE_LINUX_DEFAULT=”quiet splash”



      and modify it to give:



      GRUB_CMDLINE_LINUX_DEFAULT=”quiet splash nomodeset″



      Save your changes close gedit and run:



      sudo update-grub



      At that point and you should no longer freeze during bootup.






      share|improve this answer














      I have the same problem. I put in the CD, get the little install logo, then the screen goes black.



      It has to do with the Radeon graphics card. When I install Puppy Slack, it works, but other distros just go to black screens. Can't even get to a point where I can uninstall NVIDIA.



      I found a solution here:
      http://turriebuntu.wordpress.com/general-ubuntu-pages/ubuntu-boot-freeze-lockup-it-stops-with-a-blank-purple-or-black-screen/



      Copied and pasted just in case the link goes down:



      Installed Ubuntu lockup
      After you’ve installed Ubuntu the lockup is likely to return. The workaround is slightly different. Start your computer, and press the Shift when booting up, to get the Grub menu. Use the arrow keys to navigate/highlight the entry you want (it’s usually the first one).



      Press “e” to get into edit mode. then look for the line containing “



      .... quiet splash ....



      using the arro keys move your cursor just past this point and enter the word nomodeset so that you now have:



      .... quiet splash nomodeset ........



      and press



      Ctrl-x



      to continue booting.



      At that point you will need to make the change permanent. Open a terminal and:



      gksudo gedit /etc/default/grub



      Find this line:



      GRUB_CMDLINE_LINUX_DEFAULT=”quiet splash”



      and modify it to give:



      GRUB_CMDLINE_LINUX_DEFAULT=”quiet splash nomodeset″



      Save your changes close gedit and run:



      sudo update-grub



      At that point and you should no longer freeze during bootup.







      share|improve this answer














      share|improve this answer



      share|improve this answer








      edited Mar 11 '14 at 23:10

























      answered Mar 10 '14 at 14:21









      Velli

      11




      11












      • As this is not a constructive answer, please consider posting informations like these as a comment in the future.
        – Daniel W.
        Mar 10 '14 at 14:47










      • Understood. My bad. I'm going to edit it to include new information that's actually helpful.
        – Velli
        Mar 11 '14 at 23:06


















      • As this is not a constructive answer, please consider posting informations like these as a comment in the future.
        – Daniel W.
        Mar 10 '14 at 14:47










      • Understood. My bad. I'm going to edit it to include new information that's actually helpful.
        – Velli
        Mar 11 '14 at 23:06
















      As this is not a constructive answer, please consider posting informations like these as a comment in the future.
      – Daniel W.
      Mar 10 '14 at 14:47




      As this is not a constructive answer, please consider posting informations like these as a comment in the future.
      – Daniel W.
      Mar 10 '14 at 14:47












      Understood. My bad. I'm going to edit it to include new information that's actually helpful.
      – Velli
      Mar 11 '14 at 23:06




      Understood. My bad. I'm going to edit it to include new information that's actually helpful.
      – Velli
      Mar 11 '14 at 23:06










      up vote
      0
      down vote













      In my case it turned out to be the built-in video drivers dropping the screen backlight brightness down to zero.



      I had attempted to install Linux Mint 17.1 and Linux Mint 201403 on a Lenovo G710. Simply using the keyboard controls to adjust the screen brightness allowed me to continue with the install.



      The answer from user227444 was helpful in this scenario.



      If the issue is due to kernal mod incompatibility it may be wise to explicitly specify the mod to use in the grub startup script as defined here: http://community.linuxmint.com/tutorial/view/842






      share|improve this answer

























        up vote
        0
        down vote













        In my case it turned out to be the built-in video drivers dropping the screen backlight brightness down to zero.



        I had attempted to install Linux Mint 17.1 and Linux Mint 201403 on a Lenovo G710. Simply using the keyboard controls to adjust the screen brightness allowed me to continue with the install.



        The answer from user227444 was helpful in this scenario.



        If the issue is due to kernal mod incompatibility it may be wise to explicitly specify the mod to use in the grub startup script as defined here: http://community.linuxmint.com/tutorial/view/842






        share|improve this answer























          up vote
          0
          down vote










          up vote
          0
          down vote









          In my case it turned out to be the built-in video drivers dropping the screen backlight brightness down to zero.



          I had attempted to install Linux Mint 17.1 and Linux Mint 201403 on a Lenovo G710. Simply using the keyboard controls to adjust the screen brightness allowed me to continue with the install.



          The answer from user227444 was helpful in this scenario.



          If the issue is due to kernal mod incompatibility it may be wise to explicitly specify the mod to use in the grub startup script as defined here: http://community.linuxmint.com/tutorial/view/842






          share|improve this answer












          In my case it turned out to be the built-in video drivers dropping the screen backlight brightness down to zero.



          I had attempted to install Linux Mint 17.1 and Linux Mint 201403 on a Lenovo G710. Simply using the keyboard controls to adjust the screen brightness allowed me to continue with the install.



          The answer from user227444 was helpful in this scenario.



          If the issue is due to kernal mod incompatibility it may be wise to explicitly specify the mod to use in the grub startup script as defined here: http://community.linuxmint.com/tutorial/view/842







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered Jan 5 '15 at 3:52









          user1660317

          1




          1






















              up vote
              0
              down vote













              If You have BIOS with UEFI/EFI You should disable this option in it (BIOS menu -> boot options) - than You will be able to use Your external OS on USB to install it in on Your hard drive.






              share|improve this answer

























                up vote
                0
                down vote













                If You have BIOS with UEFI/EFI You should disable this option in it (BIOS menu -> boot options) - than You will be able to use Your external OS on USB to install it in on Your hard drive.






                share|improve this answer























                  up vote
                  0
                  down vote










                  up vote
                  0
                  down vote









                  If You have BIOS with UEFI/EFI You should disable this option in it (BIOS menu -> boot options) - than You will be able to use Your external OS on USB to install it in on Your hard drive.






                  share|improve this answer












                  If You have BIOS with UEFI/EFI You should disable this option in it (BIOS menu -> boot options) - than You will be able to use Your external OS on USB to install it in on Your hard drive.







                  share|improve this answer












                  share|improve this answer



                  share|improve this answer










                  answered Feb 26 '16 at 9:34









                  user3799089

                  12




                  12






























                      draft saved

                      draft discarded




















































                      Thanks for contributing an answer to Ask Ubuntu!


                      • Please be sure to answer the question. Provide details and share your research!

                      But avoid



                      • Asking for help, clarification, or responding to other answers.

                      • Making statements based on opinion; back them up with references or personal experience.


                      To learn more, see our tips on writing great answers.





                      Some of your past answers have not been well-received, and you're in danger of being blocked from answering.


                      Please pay close attention to the following guidance:


                      • Please be sure to answer the question. Provide details and share your research!

                      But avoid



                      • Asking for help, clarification, or responding to other answers.

                      • Making statements based on opinion; back them up with references or personal experience.


                      To learn more, see our tips on writing great answers.




                      draft saved


                      draft discarded














                      StackExchange.ready(
                      function () {
                      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f393695%2fblack-screen-when-trying-to-install-ubuntu-13-10%23new-answer', 'question_page');
                      }
                      );

                      Post as a guest















                      Required, but never shown





















































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown

































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown







                      Popular posts from this blog

                      數位音樂下載

                      When can things happen in Etherscan, such as the picture below?

                      格利澤436b