Fixing grub rescue [duplicate]
This question already has an answer here:
GRUB rescue problem after deleting Ubuntu partition! [duplicate]
4 answers
I removed the ubuntu partition from windows and extended the volume to a existing windows partition. Earlier I had a dual boot windows and ubuntu. Now it shows me the grub rescue.
grub rescue>ls
(hd0) (hd0,msdos5) (hd0,msdos3) (hd0,msdos2) (hd0,msdos1)
I loaded a livecd of ubuntu and did boot repair. Still it is showing grub resue. And I don't have a windows cd.
After trying doing a
"ls (hd0,msdos1) /boot"
on all of partition shown by ls[1]. In each case, it shows Filesystem is unknown.
In the liveCD, I get this:
sudo fdisk -l
Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 31791103 31789056 15.2G 27 Hidden NTFS WinRE
/dev/sda2 * 31791104 32507903 716800 350M 7 HPFS/NTFS/exFAT
/dev/sda3 32507904 780682991 748175088 356.8G 7 HPFS/NTFS/exFAT
/dev/sda4 780685310 1465147391 684462082 326.4G f W95 Ext'd (LBA)
/dev/sda5 780685312 1465143607 684458296 326.4G 7 HPFS/NTFS/exFAT
I don't have any linux partition, should I install linux?
Is there anyway to fix this?
Gparted:
boot dual-boot grub2 partitioning grubrescue
marked as duplicate by Eric Carvalho, Thomas, Charles Green, George Udosen, vidarlo 2 days ago
This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.
|
show 6 more comments
This question already has an answer here:
GRUB rescue problem after deleting Ubuntu partition! [duplicate]
4 answers
I removed the ubuntu partition from windows and extended the volume to a existing windows partition. Earlier I had a dual boot windows and ubuntu. Now it shows me the grub rescue.
grub rescue>ls
(hd0) (hd0,msdos5) (hd0,msdos3) (hd0,msdos2) (hd0,msdos1)
I loaded a livecd of ubuntu and did boot repair. Still it is showing grub resue. And I don't have a windows cd.
After trying doing a
"ls (hd0,msdos1) /boot"
on all of partition shown by ls[1]. In each case, it shows Filesystem is unknown.
In the liveCD, I get this:
sudo fdisk -l
Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 31791103 31789056 15.2G 27 Hidden NTFS WinRE
/dev/sda2 * 31791104 32507903 716800 350M 7 HPFS/NTFS/exFAT
/dev/sda3 32507904 780682991 748175088 356.8G 7 HPFS/NTFS/exFAT
/dev/sda4 780685310 1465147391 684462082 326.4G f W95 Ext'd (LBA)
/dev/sda5 780685312 1465143607 684458296 326.4G 7 HPFS/NTFS/exFAT
I don't have any linux partition, should I install linux?
Is there anyway to fix this?
Gparted:
boot dual-boot grub2 partitioning grubrescue
marked as duplicate by Eric Carvalho, Thomas, Charles Green, George Udosen, vidarlo 2 days ago
This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.
@Zacharee1 I tried ls (hdX,msdosX) boot on all partitions. All of them show Filesystem is unknown.
– Abhishek Bhatia
Mar 24 '16 at 1:20
I don't see that command in the answer there. Follow the procedure exactly.
– TheWanderer
Mar 24 '16 at 1:22
@Zacharee1 I can't identify the partition. Please check question again, I have edited.
– Abhishek Bhatia
Mar 24 '16 at 1:29
I think you need to burn a Windows install disc and use it.
– TheWanderer
Mar 24 '16 at 1:31
@Zacharee1 Does it make sense to install linux from a liveCD and then try maybe?
– Abhishek Bhatia
Mar 24 '16 at 1:32
|
show 6 more comments
This question already has an answer here:
GRUB rescue problem after deleting Ubuntu partition! [duplicate]
4 answers
I removed the ubuntu partition from windows and extended the volume to a existing windows partition. Earlier I had a dual boot windows and ubuntu. Now it shows me the grub rescue.
grub rescue>ls
(hd0) (hd0,msdos5) (hd0,msdos3) (hd0,msdos2) (hd0,msdos1)
I loaded a livecd of ubuntu and did boot repair. Still it is showing grub resue. And I don't have a windows cd.
After trying doing a
"ls (hd0,msdos1) /boot"
on all of partition shown by ls[1]. In each case, it shows Filesystem is unknown.
In the liveCD, I get this:
sudo fdisk -l
Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 31791103 31789056 15.2G 27 Hidden NTFS WinRE
/dev/sda2 * 31791104 32507903 716800 350M 7 HPFS/NTFS/exFAT
/dev/sda3 32507904 780682991 748175088 356.8G 7 HPFS/NTFS/exFAT
/dev/sda4 780685310 1465147391 684462082 326.4G f W95 Ext'd (LBA)
/dev/sda5 780685312 1465143607 684458296 326.4G 7 HPFS/NTFS/exFAT
I don't have any linux partition, should I install linux?
Is there anyway to fix this?
Gparted:
boot dual-boot grub2 partitioning grubrescue
This question already has an answer here:
GRUB rescue problem after deleting Ubuntu partition! [duplicate]
4 answers
I removed the ubuntu partition from windows and extended the volume to a existing windows partition. Earlier I had a dual boot windows and ubuntu. Now it shows me the grub rescue.
grub rescue>ls
(hd0) (hd0,msdos5) (hd0,msdos3) (hd0,msdos2) (hd0,msdos1)
I loaded a livecd of ubuntu and did boot repair. Still it is showing grub resue. And I don't have a windows cd.
After trying doing a
"ls (hd0,msdos1) /boot"
on all of partition shown by ls[1]. In each case, it shows Filesystem is unknown.
In the liveCD, I get this:
sudo fdisk -l
Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 31791103 31789056 15.2G 27 Hidden NTFS WinRE
/dev/sda2 * 31791104 32507903 716800 350M 7 HPFS/NTFS/exFAT
/dev/sda3 32507904 780682991 748175088 356.8G 7 HPFS/NTFS/exFAT
/dev/sda4 780685310 1465147391 684462082 326.4G f W95 Ext'd (LBA)
/dev/sda5 780685312 1465143607 684458296 326.4G 7 HPFS/NTFS/exFAT
I don't have any linux partition, should I install linux?
Is there anyway to fix this?
Gparted:
This question already has an answer here:
GRUB rescue problem after deleting Ubuntu partition! [duplicate]
4 answers
boot dual-boot grub2 partitioning grubrescue
boot dual-boot grub2 partitioning grubrescue
edited Apr 13 '17 at 12:25
Community♦
1
1
asked Mar 24 '16 at 1:15
Abhishek Bhatia
3392935
3392935
marked as duplicate by Eric Carvalho, Thomas, Charles Green, George Udosen, vidarlo 2 days ago
This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.
marked as duplicate by Eric Carvalho, Thomas, Charles Green, George Udosen, vidarlo 2 days ago
This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.
@Zacharee1 I tried ls (hdX,msdosX) boot on all partitions. All of them show Filesystem is unknown.
– Abhishek Bhatia
Mar 24 '16 at 1:20
I don't see that command in the answer there. Follow the procedure exactly.
– TheWanderer
Mar 24 '16 at 1:22
@Zacharee1 I can't identify the partition. Please check question again, I have edited.
– Abhishek Bhatia
Mar 24 '16 at 1:29
I think you need to burn a Windows install disc and use it.
– TheWanderer
Mar 24 '16 at 1:31
@Zacharee1 Does it make sense to install linux from a liveCD and then try maybe?
– Abhishek Bhatia
Mar 24 '16 at 1:32
|
show 6 more comments
@Zacharee1 I tried ls (hdX,msdosX) boot on all partitions. All of them show Filesystem is unknown.
– Abhishek Bhatia
Mar 24 '16 at 1:20
I don't see that command in the answer there. Follow the procedure exactly.
– TheWanderer
Mar 24 '16 at 1:22
@Zacharee1 I can't identify the partition. Please check question again, I have edited.
– Abhishek Bhatia
Mar 24 '16 at 1:29
I think you need to burn a Windows install disc and use it.
– TheWanderer
Mar 24 '16 at 1:31
@Zacharee1 Does it make sense to install linux from a liveCD and then try maybe?
– Abhishek Bhatia
Mar 24 '16 at 1:32
@Zacharee1 I tried ls (hdX,msdosX) boot on all partitions. All of them show Filesystem is unknown.
– Abhishek Bhatia
Mar 24 '16 at 1:20
@Zacharee1 I tried ls (hdX,msdosX) boot on all partitions. All of them show Filesystem is unknown.
– Abhishek Bhatia
Mar 24 '16 at 1:20
I don't see that command in the answer there. Follow the procedure exactly.
– TheWanderer
Mar 24 '16 at 1:22
I don't see that command in the answer there. Follow the procedure exactly.
– TheWanderer
Mar 24 '16 at 1:22
@Zacharee1 I can't identify the partition. Please check question again, I have edited.
– Abhishek Bhatia
Mar 24 '16 at 1:29
@Zacharee1 I can't identify the partition. Please check question again, I have edited.
– Abhishek Bhatia
Mar 24 '16 at 1:29
I think you need to burn a Windows install disc and use it.
– TheWanderer
Mar 24 '16 at 1:31
I think you need to burn a Windows install disc and use it.
– TheWanderer
Mar 24 '16 at 1:31
@Zacharee1 Does it make sense to install linux from a liveCD and then try maybe?
– Abhishek Bhatia
Mar 24 '16 at 1:32
@Zacharee1 Does it make sense to install linux from a liveCD and then try maybe?
– Abhishek Bhatia
Mar 24 '16 at 1:32
|
show 6 more comments
1 Answer
1
active
oldest
votes
Boot on Ubuntu with Ubuntu Live DVD/USB and executesudo fdisk -l
, note your hdd ID (sda in your case)
Now sudo apt-get update && sudo apt-get install syslinux
Finally sudo dd if=/usr/lib/syslinux/mbr/mbr.bin of=/dev/sda
Exit and you can now reboot on Windows. Hope it helps, thanks
Thanks for answer! But I am getting this error while running it :ubuntu@ubuntu:~$ sudo dd if=/usr/lib/syslinux/mbr.bin of=/dev/sda
dd: failed to open ‘/usr/lib/syslinux/mbr.bin’: No such file or directory
– Abhishek Bhatia
Mar 24 '16 at 3:37
Possibly a change in mbr location, try /usr/lib/syslinux/mbr/mbr.bin
– Arijit Chatterjee
Mar 24 '16 at 3:49
Thanks so much! That works! If possible please provide some explanation. I have limited to no knowledge about mbr.
– Abhishek Bhatia
Mar 24 '16 at 4:04
Dear Abhishek, I suggest you to read more on Google about it, as I am not an expert too. Regards
– Arijit Chatterjee
Mar 24 '16 at 4:09
add a comment |
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
Boot on Ubuntu with Ubuntu Live DVD/USB and executesudo fdisk -l
, note your hdd ID (sda in your case)
Now sudo apt-get update && sudo apt-get install syslinux
Finally sudo dd if=/usr/lib/syslinux/mbr/mbr.bin of=/dev/sda
Exit and you can now reboot on Windows. Hope it helps, thanks
Thanks for answer! But I am getting this error while running it :ubuntu@ubuntu:~$ sudo dd if=/usr/lib/syslinux/mbr.bin of=/dev/sda
dd: failed to open ‘/usr/lib/syslinux/mbr.bin’: No such file or directory
– Abhishek Bhatia
Mar 24 '16 at 3:37
Possibly a change in mbr location, try /usr/lib/syslinux/mbr/mbr.bin
– Arijit Chatterjee
Mar 24 '16 at 3:49
Thanks so much! That works! If possible please provide some explanation. I have limited to no knowledge about mbr.
– Abhishek Bhatia
Mar 24 '16 at 4:04
Dear Abhishek, I suggest you to read more on Google about it, as I am not an expert too. Regards
– Arijit Chatterjee
Mar 24 '16 at 4:09
add a comment |
Boot on Ubuntu with Ubuntu Live DVD/USB and executesudo fdisk -l
, note your hdd ID (sda in your case)
Now sudo apt-get update && sudo apt-get install syslinux
Finally sudo dd if=/usr/lib/syslinux/mbr/mbr.bin of=/dev/sda
Exit and you can now reboot on Windows. Hope it helps, thanks
Thanks for answer! But I am getting this error while running it :ubuntu@ubuntu:~$ sudo dd if=/usr/lib/syslinux/mbr.bin of=/dev/sda
dd: failed to open ‘/usr/lib/syslinux/mbr.bin’: No such file or directory
– Abhishek Bhatia
Mar 24 '16 at 3:37
Possibly a change in mbr location, try /usr/lib/syslinux/mbr/mbr.bin
– Arijit Chatterjee
Mar 24 '16 at 3:49
Thanks so much! That works! If possible please provide some explanation. I have limited to no knowledge about mbr.
– Abhishek Bhatia
Mar 24 '16 at 4:04
Dear Abhishek, I suggest you to read more on Google about it, as I am not an expert too. Regards
– Arijit Chatterjee
Mar 24 '16 at 4:09
add a comment |
Boot on Ubuntu with Ubuntu Live DVD/USB and executesudo fdisk -l
, note your hdd ID (sda in your case)
Now sudo apt-get update && sudo apt-get install syslinux
Finally sudo dd if=/usr/lib/syslinux/mbr/mbr.bin of=/dev/sda
Exit and you can now reboot on Windows. Hope it helps, thanks
Boot on Ubuntu with Ubuntu Live DVD/USB and executesudo fdisk -l
, note your hdd ID (sda in your case)
Now sudo apt-get update && sudo apt-get install syslinux
Finally sudo dd if=/usr/lib/syslinux/mbr/mbr.bin of=/dev/sda
Exit and you can now reboot on Windows. Hope it helps, thanks
edited Mar 28 '16 at 15:22
answered Mar 24 '16 at 3:13
Arijit Chatterjee
8871311
8871311
Thanks for answer! But I am getting this error while running it :ubuntu@ubuntu:~$ sudo dd if=/usr/lib/syslinux/mbr.bin of=/dev/sda
dd: failed to open ‘/usr/lib/syslinux/mbr.bin’: No such file or directory
– Abhishek Bhatia
Mar 24 '16 at 3:37
Possibly a change in mbr location, try /usr/lib/syslinux/mbr/mbr.bin
– Arijit Chatterjee
Mar 24 '16 at 3:49
Thanks so much! That works! If possible please provide some explanation. I have limited to no knowledge about mbr.
– Abhishek Bhatia
Mar 24 '16 at 4:04
Dear Abhishek, I suggest you to read more on Google about it, as I am not an expert too. Regards
– Arijit Chatterjee
Mar 24 '16 at 4:09
add a comment |
Thanks for answer! But I am getting this error while running it :ubuntu@ubuntu:~$ sudo dd if=/usr/lib/syslinux/mbr.bin of=/dev/sda
dd: failed to open ‘/usr/lib/syslinux/mbr.bin’: No such file or directory
– Abhishek Bhatia
Mar 24 '16 at 3:37
Possibly a change in mbr location, try /usr/lib/syslinux/mbr/mbr.bin
– Arijit Chatterjee
Mar 24 '16 at 3:49
Thanks so much! That works! If possible please provide some explanation. I have limited to no knowledge about mbr.
– Abhishek Bhatia
Mar 24 '16 at 4:04
Dear Abhishek, I suggest you to read more on Google about it, as I am not an expert too. Regards
– Arijit Chatterjee
Mar 24 '16 at 4:09
Thanks for answer! But I am getting this error while running it :
ubuntu@ubuntu:~$ sudo dd if=/usr/lib/syslinux/mbr.bin of=/dev/sda
dd: failed to open ‘/usr/lib/syslinux/mbr.bin’: No such file or directory
– Abhishek Bhatia
Mar 24 '16 at 3:37
Thanks for answer! But I am getting this error while running it :
ubuntu@ubuntu:~$ sudo dd if=/usr/lib/syslinux/mbr.bin of=/dev/sda
dd: failed to open ‘/usr/lib/syslinux/mbr.bin’: No such file or directory
– Abhishek Bhatia
Mar 24 '16 at 3:37
Possibly a change in mbr location, try /usr/lib/syslinux/mbr/mbr.bin
– Arijit Chatterjee
Mar 24 '16 at 3:49
Possibly a change in mbr location, try /usr/lib/syslinux/mbr/mbr.bin
– Arijit Chatterjee
Mar 24 '16 at 3:49
Thanks so much! That works! If possible please provide some explanation. I have limited to no knowledge about mbr.
– Abhishek Bhatia
Mar 24 '16 at 4:04
Thanks so much! That works! If possible please provide some explanation. I have limited to no knowledge about mbr.
– Abhishek Bhatia
Mar 24 '16 at 4:04
Dear Abhishek, I suggest you to read more on Google about it, as I am not an expert too. Regards
– Arijit Chatterjee
Mar 24 '16 at 4:09
Dear Abhishek, I suggest you to read more on Google about it, as I am not an expert too. Regards
– Arijit Chatterjee
Mar 24 '16 at 4:09
add a comment |
@Zacharee1 I tried ls (hdX,msdosX) boot on all partitions. All of them show Filesystem is unknown.
– Abhishek Bhatia
Mar 24 '16 at 1:20
I don't see that command in the answer there. Follow the procedure exactly.
– TheWanderer
Mar 24 '16 at 1:22
@Zacharee1 I can't identify the partition. Please check question again, I have edited.
– Abhishek Bhatia
Mar 24 '16 at 1:29
I think you need to burn a Windows install disc and use it.
– TheWanderer
Mar 24 '16 at 1:31
@Zacharee1 Does it make sense to install linux from a liveCD and then try maybe?
– Abhishek Bhatia
Mar 24 '16 at 1:32