Can't boot to Windows 10 after installing alongside Ubuntu 16.04 and using bcedit [duplicate]











up vote
0
down vote

favorite













This question already has an answer here:




  • “GPT detected. Please create a BIOS-Boot partition” while using boot-repair

    2 answers




I have Ubuntu 16.04 installed and I wanted to install Windows 10. I installed it and it skipped the GRUB and went straight to Windows 10. I used a copy of boot-repair USB disk and tried to run recommended settings but I got this message:




GPT detected. Please create a BIOS-Boot partition (>1MB, unformattedfilesystem, bios_grub flag).

This can be performed via tools such as Gparted. Then try again.




After an hour of so of trying things I finally managed to boot into Ubuntu running this:



bcdedit /set {bootmgr} path EFIubuntushimx64.efi


But now I can't boot to Windows, can't run boot-repair in recommended settings, in advanced settings tried settings sda1 (where the UEFI partition is) but grub2 isn't detecting my Windows. Also, I have an entry for an old Windows that's incorrect.



Here's my bootinfo summary generated from boot-repair.



Here's the output of efibootmgr -v if it helps somehow:



BootCurrent: 0000Timeout: 2 seconds
BootOrder: 0000,0002,0001,2001,2002,2003
Boot0000* Windows Boot Manager HD(1,GPT,fae7a125-e7c6-4570-9978-536f1ab52ece,0x800,0x100000)/File(EFIubuntugrubx64.efi)WINDOWS.........x...B .C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...3................
Boot0001* Ubuntu PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0,0,0)/HD(1,GPT,fae7a125-e7c6-4570-9978-536f1ab52ece,0x800,0x100000)/File(EFIubuntugrubx64.efi)A01 ..
Boot0002* Windows Boot Manager HD(1,GPT,fae7a125-e7c6-4570-9978-536f1ab52ece,0x800,0x100000)/File(EFIMicrosoftBootbootmgfw.efi)RC
Boot0003* Unknown Device: HD(1,GPT,fae7a125-e7c6-4570-9978-536f1ab52ece,0x800,0x100000)/File(EFIubuntushimx64.efi)RC
Boot0004* Unknown Device: HD(1,GPT,fae7a125-e7c6-4570-9978-536f1ab52ece,0x800,0x100000)/File(EFIubuntushimx64.efi)RC
Boot0005* TOSHIBA MQ01ABD100 BBS(PCMCIA,TOSHIBA MQ01ABD100 ,0x500)................-.f.......f.A.f...................................| .........A.........................
Boot0006* Unknown Device: HD(2,GPT,5fca3638-90aa-4118-8d5a-09ed4f4191fa,0x12c800,0x96000)/File(EFIubuntushimx64.efi)RC
Boot0007* Unknown Device: HD(2,GPT,5fca3638-90aa-4118-8d5a-09ed4f4191fa,0x12c800,0x96000)/File(EFIubuntushimx64.efi)RC
Boot0008* Unknown Device: HD(2,GPT,5fca3638-90aa-4118-8d5a-09ed4f4191fa,0x12c800,0x96000)/File(EFIubuntushimx64.efi)RC
Boot000A* Unknown Device: HD(2,GPT,5fca3638-90aa-4118-8d5a-09ed4f4191fa,0x12c800,0x96000)/File(EFIubuntushimx64.efi)RC
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC









share|improve this question















marked as duplicate by karel, Eric Carvalho, Thomas, Fabby, abu_bua Dec 15 at 17:50


This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.



















    up vote
    0
    down vote

    favorite













    This question already has an answer here:




    • “GPT detected. Please create a BIOS-Boot partition” while using boot-repair

      2 answers




    I have Ubuntu 16.04 installed and I wanted to install Windows 10. I installed it and it skipped the GRUB and went straight to Windows 10. I used a copy of boot-repair USB disk and tried to run recommended settings but I got this message:




    GPT detected. Please create a BIOS-Boot partition (>1MB, unformattedfilesystem, bios_grub flag).

    This can be performed via tools such as Gparted. Then try again.




    After an hour of so of trying things I finally managed to boot into Ubuntu running this:



    bcdedit /set {bootmgr} path EFIubuntushimx64.efi


    But now I can't boot to Windows, can't run boot-repair in recommended settings, in advanced settings tried settings sda1 (where the UEFI partition is) but grub2 isn't detecting my Windows. Also, I have an entry for an old Windows that's incorrect.



    Here's my bootinfo summary generated from boot-repair.



    Here's the output of efibootmgr -v if it helps somehow:



    BootCurrent: 0000Timeout: 2 seconds
    BootOrder: 0000,0002,0001,2001,2002,2003
    Boot0000* Windows Boot Manager HD(1,GPT,fae7a125-e7c6-4570-9978-536f1ab52ece,0x800,0x100000)/File(EFIubuntugrubx64.efi)WINDOWS.........x...B .C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...3................
    Boot0001* Ubuntu PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0,0,0)/HD(1,GPT,fae7a125-e7c6-4570-9978-536f1ab52ece,0x800,0x100000)/File(EFIubuntugrubx64.efi)A01 ..
    Boot0002* Windows Boot Manager HD(1,GPT,fae7a125-e7c6-4570-9978-536f1ab52ece,0x800,0x100000)/File(EFIMicrosoftBootbootmgfw.efi)RC
    Boot0003* Unknown Device: HD(1,GPT,fae7a125-e7c6-4570-9978-536f1ab52ece,0x800,0x100000)/File(EFIubuntushimx64.efi)RC
    Boot0004* Unknown Device: HD(1,GPT,fae7a125-e7c6-4570-9978-536f1ab52ece,0x800,0x100000)/File(EFIubuntushimx64.efi)RC
    Boot0005* TOSHIBA MQ01ABD100 BBS(PCMCIA,TOSHIBA MQ01ABD100 ,0x500)................-.f.......f.A.f...................................| .........A.........................
    Boot0006* Unknown Device: HD(2,GPT,5fca3638-90aa-4118-8d5a-09ed4f4191fa,0x12c800,0x96000)/File(EFIubuntushimx64.efi)RC
    Boot0007* Unknown Device: HD(2,GPT,5fca3638-90aa-4118-8d5a-09ed4f4191fa,0x12c800,0x96000)/File(EFIubuntushimx64.efi)RC
    Boot0008* Unknown Device: HD(2,GPT,5fca3638-90aa-4118-8d5a-09ed4f4191fa,0x12c800,0x96000)/File(EFIubuntushimx64.efi)RC
    Boot000A* Unknown Device: HD(2,GPT,5fca3638-90aa-4118-8d5a-09ed4f4191fa,0x12c800,0x96000)/File(EFIubuntushimx64.efi)RC
    Boot2001* EFI USB Device RC
    Boot2002* EFI DVD/CDROM RC
    Boot2003* EFI Network RC









    share|improve this question















    marked as duplicate by karel, Eric Carvalho, Thomas, Fabby, abu_bua Dec 15 at 17:50


    This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.

















      up vote
      0
      down vote

      favorite









      up vote
      0
      down vote

      favorite












      This question already has an answer here:




      • “GPT detected. Please create a BIOS-Boot partition” while using boot-repair

        2 answers




      I have Ubuntu 16.04 installed and I wanted to install Windows 10. I installed it and it skipped the GRUB and went straight to Windows 10. I used a copy of boot-repair USB disk and tried to run recommended settings but I got this message:




      GPT detected. Please create a BIOS-Boot partition (>1MB, unformattedfilesystem, bios_grub flag).

      This can be performed via tools such as Gparted. Then try again.




      After an hour of so of trying things I finally managed to boot into Ubuntu running this:



      bcdedit /set {bootmgr} path EFIubuntushimx64.efi


      But now I can't boot to Windows, can't run boot-repair in recommended settings, in advanced settings tried settings sda1 (where the UEFI partition is) but grub2 isn't detecting my Windows. Also, I have an entry for an old Windows that's incorrect.



      Here's my bootinfo summary generated from boot-repair.



      Here's the output of efibootmgr -v if it helps somehow:



      BootCurrent: 0000Timeout: 2 seconds
      BootOrder: 0000,0002,0001,2001,2002,2003
      Boot0000* Windows Boot Manager HD(1,GPT,fae7a125-e7c6-4570-9978-536f1ab52ece,0x800,0x100000)/File(EFIubuntugrubx64.efi)WINDOWS.........x...B .C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...3................
      Boot0001* Ubuntu PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0,0,0)/HD(1,GPT,fae7a125-e7c6-4570-9978-536f1ab52ece,0x800,0x100000)/File(EFIubuntugrubx64.efi)A01 ..
      Boot0002* Windows Boot Manager HD(1,GPT,fae7a125-e7c6-4570-9978-536f1ab52ece,0x800,0x100000)/File(EFIMicrosoftBootbootmgfw.efi)RC
      Boot0003* Unknown Device: HD(1,GPT,fae7a125-e7c6-4570-9978-536f1ab52ece,0x800,0x100000)/File(EFIubuntushimx64.efi)RC
      Boot0004* Unknown Device: HD(1,GPT,fae7a125-e7c6-4570-9978-536f1ab52ece,0x800,0x100000)/File(EFIubuntushimx64.efi)RC
      Boot0005* TOSHIBA MQ01ABD100 BBS(PCMCIA,TOSHIBA MQ01ABD100 ,0x500)................-.f.......f.A.f...................................| .........A.........................
      Boot0006* Unknown Device: HD(2,GPT,5fca3638-90aa-4118-8d5a-09ed4f4191fa,0x12c800,0x96000)/File(EFIubuntushimx64.efi)RC
      Boot0007* Unknown Device: HD(2,GPT,5fca3638-90aa-4118-8d5a-09ed4f4191fa,0x12c800,0x96000)/File(EFIubuntushimx64.efi)RC
      Boot0008* Unknown Device: HD(2,GPT,5fca3638-90aa-4118-8d5a-09ed4f4191fa,0x12c800,0x96000)/File(EFIubuntushimx64.efi)RC
      Boot000A* Unknown Device: HD(2,GPT,5fca3638-90aa-4118-8d5a-09ed4f4191fa,0x12c800,0x96000)/File(EFIubuntushimx64.efi)RC
      Boot2001* EFI USB Device RC
      Boot2002* EFI DVD/CDROM RC
      Boot2003* EFI Network RC









      share|improve this question
















      This question already has an answer here:




      • “GPT detected. Please create a BIOS-Boot partition” while using boot-repair

        2 answers




      I have Ubuntu 16.04 installed and I wanted to install Windows 10. I installed it and it skipped the GRUB and went straight to Windows 10. I used a copy of boot-repair USB disk and tried to run recommended settings but I got this message:




      GPT detected. Please create a BIOS-Boot partition (>1MB, unformattedfilesystem, bios_grub flag).

      This can be performed via tools such as Gparted. Then try again.




      After an hour of so of trying things I finally managed to boot into Ubuntu running this:



      bcdedit /set {bootmgr} path EFIubuntushimx64.efi


      But now I can't boot to Windows, can't run boot-repair in recommended settings, in advanced settings tried settings sda1 (where the UEFI partition is) but grub2 isn't detecting my Windows. Also, I have an entry for an old Windows that's incorrect.



      Here's my bootinfo summary generated from boot-repair.



      Here's the output of efibootmgr -v if it helps somehow:



      BootCurrent: 0000Timeout: 2 seconds
      BootOrder: 0000,0002,0001,2001,2002,2003
      Boot0000* Windows Boot Manager HD(1,GPT,fae7a125-e7c6-4570-9978-536f1ab52ece,0x800,0x100000)/File(EFIubuntugrubx64.efi)WINDOWS.........x...B .C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...3................
      Boot0001* Ubuntu PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0,0,0)/HD(1,GPT,fae7a125-e7c6-4570-9978-536f1ab52ece,0x800,0x100000)/File(EFIubuntugrubx64.efi)A01 ..
      Boot0002* Windows Boot Manager HD(1,GPT,fae7a125-e7c6-4570-9978-536f1ab52ece,0x800,0x100000)/File(EFIMicrosoftBootbootmgfw.efi)RC
      Boot0003* Unknown Device: HD(1,GPT,fae7a125-e7c6-4570-9978-536f1ab52ece,0x800,0x100000)/File(EFIubuntushimx64.efi)RC
      Boot0004* Unknown Device: HD(1,GPT,fae7a125-e7c6-4570-9978-536f1ab52ece,0x800,0x100000)/File(EFIubuntushimx64.efi)RC
      Boot0005* TOSHIBA MQ01ABD100 BBS(PCMCIA,TOSHIBA MQ01ABD100 ,0x500)................-.f.......f.A.f...................................| .........A.........................
      Boot0006* Unknown Device: HD(2,GPT,5fca3638-90aa-4118-8d5a-09ed4f4191fa,0x12c800,0x96000)/File(EFIubuntushimx64.efi)RC
      Boot0007* Unknown Device: HD(2,GPT,5fca3638-90aa-4118-8d5a-09ed4f4191fa,0x12c800,0x96000)/File(EFIubuntushimx64.efi)RC
      Boot0008* Unknown Device: HD(2,GPT,5fca3638-90aa-4118-8d5a-09ed4f4191fa,0x12c800,0x96000)/File(EFIubuntushimx64.efi)RC
      Boot000A* Unknown Device: HD(2,GPT,5fca3638-90aa-4118-8d5a-09ed4f4191fa,0x12c800,0x96000)/File(EFIubuntushimx64.efi)RC
      Boot2001* EFI USB Device RC
      Boot2002* EFI DVD/CDROM RC
      Boot2003* EFI Network RC




      This question already has an answer here:




      • “GPT detected. Please create a BIOS-Boot partition” while using boot-repair

        2 answers








      dual-boot grub2 partitioning 16.04 uefi






      share|improve this question















      share|improve this question













      share|improve this question




      share|improve this question








      edited Dec 13 at 18:12









      Zanna

      49.8k13130237




      49.8k13130237










      asked Jun 19 '16 at 22:23









      Conrado Garcia Berrotaran

      1




      1




      marked as duplicate by karel, Eric Carvalho, Thomas, Fabby, abu_bua Dec 15 at 17:50


      This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.






      marked as duplicate by karel, Eric Carvalho, Thomas, Fabby, abu_bua Dec 15 at 17:50


      This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.
























          1 Answer
          1






          active

          oldest

          votes

















          up vote
          1
          down vote













          You're probably running into this bug:



          https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1091464



          If so, two workarounds come to mind:




          • You can disable Secure Boot, as described in more detail on this page of mine. This has the drawback that you'll lose the benefits of Secure Boot, which is designed to protect the computer against pre-boot malware.

          • You can install my rEFInd boot manager, which will then take over from GRUB as your primary boot menu. rEFInd does a better job than GRUB of launching Windows on some computers. Note that you'll probably have to add a rEFInd key to your MOK list on the first boot -- you'll probably see a blue screen that leads to a file manager in which you can select refind.cer and/or refind_local.cer from the EFI/refind/keys directory on one of your partitions. This process can be mystifying, but it's not hard if you don't panic. See this page of the rEFInd documentation for more information than you probably want about this.






          share|improve this answer





















          • Thanks for the answer, i uninstalled everything and tried installing Windows first and then Ubuntu. Now it boots directly to Windows, bcedit doesn't take effect anymore. Secure boot is disabled and has been disabled since the begining. I'll try rEFInd boot manager.
            – Conrado Garcia Berrotaran
            Jun 20 '16 at 23:29










          • It's starting to sound like your firmware may be defective. Some brands (Sony, older HPs, and a few others) have such problems. The best solution is to return the defective device to the store for a refund. Failing that, there are ugly and unreliable workarounds. There are tons of questions here on this subject, like this one.
            – Rod Smith
            Jun 21 '16 at 1:21


















          1 Answer
          1






          active

          oldest

          votes








          1 Answer
          1






          active

          oldest

          votes









          active

          oldest

          votes






          active

          oldest

          votes








          up vote
          1
          down vote













          You're probably running into this bug:



          https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1091464



          If so, two workarounds come to mind:




          • You can disable Secure Boot, as described in more detail on this page of mine. This has the drawback that you'll lose the benefits of Secure Boot, which is designed to protect the computer against pre-boot malware.

          • You can install my rEFInd boot manager, which will then take over from GRUB as your primary boot menu. rEFInd does a better job than GRUB of launching Windows on some computers. Note that you'll probably have to add a rEFInd key to your MOK list on the first boot -- you'll probably see a blue screen that leads to a file manager in which you can select refind.cer and/or refind_local.cer from the EFI/refind/keys directory on one of your partitions. This process can be mystifying, but it's not hard if you don't panic. See this page of the rEFInd documentation for more information than you probably want about this.






          share|improve this answer





















          • Thanks for the answer, i uninstalled everything and tried installing Windows first and then Ubuntu. Now it boots directly to Windows, bcedit doesn't take effect anymore. Secure boot is disabled and has been disabled since the begining. I'll try rEFInd boot manager.
            – Conrado Garcia Berrotaran
            Jun 20 '16 at 23:29










          • It's starting to sound like your firmware may be defective. Some brands (Sony, older HPs, and a few others) have such problems. The best solution is to return the defective device to the store for a refund. Failing that, there are ugly and unreliable workarounds. There are tons of questions here on this subject, like this one.
            – Rod Smith
            Jun 21 '16 at 1:21















          up vote
          1
          down vote













          You're probably running into this bug:



          https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1091464



          If so, two workarounds come to mind:




          • You can disable Secure Boot, as described in more detail on this page of mine. This has the drawback that you'll lose the benefits of Secure Boot, which is designed to protect the computer against pre-boot malware.

          • You can install my rEFInd boot manager, which will then take over from GRUB as your primary boot menu. rEFInd does a better job than GRUB of launching Windows on some computers. Note that you'll probably have to add a rEFInd key to your MOK list on the first boot -- you'll probably see a blue screen that leads to a file manager in which you can select refind.cer and/or refind_local.cer from the EFI/refind/keys directory on one of your partitions. This process can be mystifying, but it's not hard if you don't panic. See this page of the rEFInd documentation for more information than you probably want about this.






          share|improve this answer





















          • Thanks for the answer, i uninstalled everything and tried installing Windows first and then Ubuntu. Now it boots directly to Windows, bcedit doesn't take effect anymore. Secure boot is disabled and has been disabled since the begining. I'll try rEFInd boot manager.
            – Conrado Garcia Berrotaran
            Jun 20 '16 at 23:29










          • It's starting to sound like your firmware may be defective. Some brands (Sony, older HPs, and a few others) have such problems. The best solution is to return the defective device to the store for a refund. Failing that, there are ugly and unreliable workarounds. There are tons of questions here on this subject, like this one.
            – Rod Smith
            Jun 21 '16 at 1:21













          up vote
          1
          down vote










          up vote
          1
          down vote









          You're probably running into this bug:



          https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1091464



          If so, two workarounds come to mind:




          • You can disable Secure Boot, as described in more detail on this page of mine. This has the drawback that you'll lose the benefits of Secure Boot, which is designed to protect the computer against pre-boot malware.

          • You can install my rEFInd boot manager, which will then take over from GRUB as your primary boot menu. rEFInd does a better job than GRUB of launching Windows on some computers. Note that you'll probably have to add a rEFInd key to your MOK list on the first boot -- you'll probably see a blue screen that leads to a file manager in which you can select refind.cer and/or refind_local.cer from the EFI/refind/keys directory on one of your partitions. This process can be mystifying, but it's not hard if you don't panic. See this page of the rEFInd documentation for more information than you probably want about this.






          share|improve this answer












          You're probably running into this bug:



          https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1091464



          If so, two workarounds come to mind:




          • You can disable Secure Boot, as described in more detail on this page of mine. This has the drawback that you'll lose the benefits of Secure Boot, which is designed to protect the computer against pre-boot malware.

          • You can install my rEFInd boot manager, which will then take over from GRUB as your primary boot menu. rEFInd does a better job than GRUB of launching Windows on some computers. Note that you'll probably have to add a rEFInd key to your MOK list on the first boot -- you'll probably see a blue screen that leads to a file manager in which you can select refind.cer and/or refind_local.cer from the EFI/refind/keys directory on one of your partitions. This process can be mystifying, but it's not hard if you don't panic. See this page of the rEFInd documentation for more information than you probably want about this.







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered Jun 20 '16 at 16:49









          Rod Smith

          35.1k43870




          35.1k43870












          • Thanks for the answer, i uninstalled everything and tried installing Windows first and then Ubuntu. Now it boots directly to Windows, bcedit doesn't take effect anymore. Secure boot is disabled and has been disabled since the begining. I'll try rEFInd boot manager.
            – Conrado Garcia Berrotaran
            Jun 20 '16 at 23:29










          • It's starting to sound like your firmware may be defective. Some brands (Sony, older HPs, and a few others) have such problems. The best solution is to return the defective device to the store for a refund. Failing that, there are ugly and unreliable workarounds. There are tons of questions here on this subject, like this one.
            – Rod Smith
            Jun 21 '16 at 1:21


















          • Thanks for the answer, i uninstalled everything and tried installing Windows first and then Ubuntu. Now it boots directly to Windows, bcedit doesn't take effect anymore. Secure boot is disabled and has been disabled since the begining. I'll try rEFInd boot manager.
            – Conrado Garcia Berrotaran
            Jun 20 '16 at 23:29










          • It's starting to sound like your firmware may be defective. Some brands (Sony, older HPs, and a few others) have such problems. The best solution is to return the defective device to the store for a refund. Failing that, there are ugly and unreliable workarounds. There are tons of questions here on this subject, like this one.
            – Rod Smith
            Jun 21 '16 at 1:21
















          Thanks for the answer, i uninstalled everything and tried installing Windows first and then Ubuntu. Now it boots directly to Windows, bcedit doesn't take effect anymore. Secure boot is disabled and has been disabled since the begining. I'll try rEFInd boot manager.
          – Conrado Garcia Berrotaran
          Jun 20 '16 at 23:29




          Thanks for the answer, i uninstalled everything and tried installing Windows first and then Ubuntu. Now it boots directly to Windows, bcedit doesn't take effect anymore. Secure boot is disabled and has been disabled since the begining. I'll try rEFInd boot manager.
          – Conrado Garcia Berrotaran
          Jun 20 '16 at 23:29












          It's starting to sound like your firmware may be defective. Some brands (Sony, older HPs, and a few others) have such problems. The best solution is to return the defective device to the store for a refund. Failing that, there are ugly and unreliable workarounds. There are tons of questions here on this subject, like this one.
          – Rod Smith
          Jun 21 '16 at 1:21




          It's starting to sound like your firmware may be defective. Some brands (Sony, older HPs, and a few others) have such problems. The best solution is to return the defective device to the store for a refund. Failing that, there are ugly and unreliable workarounds. There are tons of questions here on this subject, like this one.
          – Rod Smith
          Jun 21 '16 at 1:21



          Popular posts from this blog

          數位音樂下載

          When can things happen in Etherscan, such as the picture below?

          格利澤436b