Booting problem after upgrade, /dev/sda2 clean
After upgrading my Ubuntu, I get this message:
/dev/sda2: clean, 908443/38690816 Files, 44176803/154733312 Blocks
and nothing happens.
Any suggestions to solve it?
I found this post related to my question, however, there is 30 sec problem there not lasting forever!
My Ubuntu is running fsck on every bootup
So, my question is not about the content of this message since it's a normal fsck output. But the question is about why the system does not boot afterwards.
boot upgrade
|
show 2 more comments
After upgrading my Ubuntu, I get this message:
/dev/sda2: clean, 908443/38690816 Files, 44176803/154733312 Blocks
and nothing happens.
Any suggestions to solve it?
I found this post related to my question, however, there is 30 sec problem there not lasting forever!
My Ubuntu is running fsck on every bootup
So, my question is not about the content of this message since it's a normal fsck output. But the question is about why the system does not boot afterwards.
boot upgrade
Can you boot intoRecovery Mode
from GRUB menu?
– Raphael
Aug 8 '16 at 13:58
When do you get this message? I see this kind of message while booting and the system boots normally.
– Anwar
Aug 8 '16 at 14:02
@AnwarShah - This error reproduces itself everytime I setup a new Minimal Ubuntu. So, I would then boot to recovery mode and after installation ofi3
, the system boots fine.
– Raphael
Aug 8 '16 at 14:06
@AnwarShah It's not the same issue as "My Ubuntu is running fsck on every bootup" since their system boots normally after this message. My question is not about this message though. It's about why nothing is happening afterwards and my system does not boot.
– Mohamad Moosavi
Aug 10 '16 at 8:59
@Raphael I was not aware of that menu, I will try it as soon as I reach to my computer.
– Mohamad Moosavi
Aug 10 '16 at 9:00
|
show 2 more comments
After upgrading my Ubuntu, I get this message:
/dev/sda2: clean, 908443/38690816 Files, 44176803/154733312 Blocks
and nothing happens.
Any suggestions to solve it?
I found this post related to my question, however, there is 30 sec problem there not lasting forever!
My Ubuntu is running fsck on every bootup
So, my question is not about the content of this message since it's a normal fsck output. But the question is about why the system does not boot afterwards.
boot upgrade
After upgrading my Ubuntu, I get this message:
/dev/sda2: clean, 908443/38690816 Files, 44176803/154733312 Blocks
and nothing happens.
Any suggestions to solve it?
I found this post related to my question, however, there is 30 sec problem there not lasting forever!
My Ubuntu is running fsck on every bootup
So, my question is not about the content of this message since it's a normal fsck output. But the question is about why the system does not boot afterwards.
boot upgrade
boot upgrade
edited Apr 13 '17 at 12:23
Community♦
1
1
asked Aug 8 '16 at 13:56
Mohamad MoosaviMohamad Moosavi
1114
1114
Can you boot intoRecovery Mode
from GRUB menu?
– Raphael
Aug 8 '16 at 13:58
When do you get this message? I see this kind of message while booting and the system boots normally.
– Anwar
Aug 8 '16 at 14:02
@AnwarShah - This error reproduces itself everytime I setup a new Minimal Ubuntu. So, I would then boot to recovery mode and after installation ofi3
, the system boots fine.
– Raphael
Aug 8 '16 at 14:06
@AnwarShah It's not the same issue as "My Ubuntu is running fsck on every bootup" since their system boots normally after this message. My question is not about this message though. It's about why nothing is happening afterwards and my system does not boot.
– Mohamad Moosavi
Aug 10 '16 at 8:59
@Raphael I was not aware of that menu, I will try it as soon as I reach to my computer.
– Mohamad Moosavi
Aug 10 '16 at 9:00
|
show 2 more comments
Can you boot intoRecovery Mode
from GRUB menu?
– Raphael
Aug 8 '16 at 13:58
When do you get this message? I see this kind of message while booting and the system boots normally.
– Anwar
Aug 8 '16 at 14:02
@AnwarShah - This error reproduces itself everytime I setup a new Minimal Ubuntu. So, I would then boot to recovery mode and after installation ofi3
, the system boots fine.
– Raphael
Aug 8 '16 at 14:06
@AnwarShah It's not the same issue as "My Ubuntu is running fsck on every bootup" since their system boots normally after this message. My question is not about this message though. It's about why nothing is happening afterwards and my system does not boot.
– Mohamad Moosavi
Aug 10 '16 at 8:59
@Raphael I was not aware of that menu, I will try it as soon as I reach to my computer.
– Mohamad Moosavi
Aug 10 '16 at 9:00
Can you boot into
Recovery Mode
from GRUB menu?– Raphael
Aug 8 '16 at 13:58
Can you boot into
Recovery Mode
from GRUB menu?– Raphael
Aug 8 '16 at 13:58
When do you get this message? I see this kind of message while booting and the system boots normally.
– Anwar
Aug 8 '16 at 14:02
When do you get this message? I see this kind of message while booting and the system boots normally.
– Anwar
Aug 8 '16 at 14:02
@AnwarShah - This error reproduces itself everytime I setup a new Minimal Ubuntu. So, I would then boot to recovery mode and after installation of
i3
, the system boots fine.– Raphael
Aug 8 '16 at 14:06
@AnwarShah - This error reproduces itself everytime I setup a new Minimal Ubuntu. So, I would then boot to recovery mode and after installation of
i3
, the system boots fine.– Raphael
Aug 8 '16 at 14:06
@AnwarShah It's not the same issue as "My Ubuntu is running fsck on every bootup" since their system boots normally after this message. My question is not about this message though. It's about why nothing is happening afterwards and my system does not boot.
– Mohamad Moosavi
Aug 10 '16 at 8:59
@AnwarShah It's not the same issue as "My Ubuntu is running fsck on every bootup" since their system boots normally after this message. My question is not about this message though. It's about why nothing is happening afterwards and my system does not boot.
– Mohamad Moosavi
Aug 10 '16 at 8:59
@Raphael I was not aware of that menu, I will try it as soon as I reach to my computer.
– Mohamad Moosavi
Aug 10 '16 at 9:00
@Raphael I was not aware of that menu, I will try it as soon as I reach to my computer.
– Mohamad Moosavi
Aug 10 '16 at 9:00
|
show 2 more comments
2 Answers
2
active
oldest
votes
I think you have no problem. It's just a normal procedure in ubuntu versions 15 and newer. I offer a link to the explanation given by its author https://answers.launchpad.net/ubuntu/+question/293967
Ubuntu versions 15.04 and newer perform a quick file system check on the root disk and report the result on the screen.
The message
/dev/sda2: clean, 286631/6111232 files, 2586472/24413952 blocks
has the following meaning:
The partition that was checked is "/dev/sda"
The file system is "clean", i.e. there are no inconsistencies
"286631/6111232 files": The file system has been created to allow a maximum of 6,111,232 files, and currently there are 286,631 files,
"2586472/24413952 blocks": The storage capacity of the file system is 24,413,952 blocks (probably 4096 bytes each), and 2,586,472 blocks currently are in use.
This is an informational message confirming that the file system is ok. There is nothing that needs to be resolved or repaired.
2
While this may theoretically answer the question, it would be preferable to include the essential parts of the answer here, and provide the link for reference.
– karel
Aug 10 '16 at 5:16
Thanks for your informative reply. I know that this is not an issue but my nothing is happening afterwards. I do not have problem with this message. My question is more about how can I boot normally my computer since after this message nothing is happening.
– Mohamad Moosavi
Aug 10 '16 at 8:56
add a comment |
Please try sudo systemctl start lightdm.service
This works for Ubuntu 16.04. Hope it helps.
Reference:
Ubuntu 16.04 Switch from Console to GUI
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f809648%2fbooting-problem-after-upgrade-dev-sda2-clean%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
I think you have no problem. It's just a normal procedure in ubuntu versions 15 and newer. I offer a link to the explanation given by its author https://answers.launchpad.net/ubuntu/+question/293967
Ubuntu versions 15.04 and newer perform a quick file system check on the root disk and report the result on the screen.
The message
/dev/sda2: clean, 286631/6111232 files, 2586472/24413952 blocks
has the following meaning:
The partition that was checked is "/dev/sda"
The file system is "clean", i.e. there are no inconsistencies
"286631/6111232 files": The file system has been created to allow a maximum of 6,111,232 files, and currently there are 286,631 files,
"2586472/24413952 blocks": The storage capacity of the file system is 24,413,952 blocks (probably 4096 bytes each), and 2,586,472 blocks currently are in use.
This is an informational message confirming that the file system is ok. There is nothing that needs to be resolved or repaired.
2
While this may theoretically answer the question, it would be preferable to include the essential parts of the answer here, and provide the link for reference.
– karel
Aug 10 '16 at 5:16
Thanks for your informative reply. I know that this is not an issue but my nothing is happening afterwards. I do not have problem with this message. My question is more about how can I boot normally my computer since after this message nothing is happening.
– Mohamad Moosavi
Aug 10 '16 at 8:56
add a comment |
I think you have no problem. It's just a normal procedure in ubuntu versions 15 and newer. I offer a link to the explanation given by its author https://answers.launchpad.net/ubuntu/+question/293967
Ubuntu versions 15.04 and newer perform a quick file system check on the root disk and report the result on the screen.
The message
/dev/sda2: clean, 286631/6111232 files, 2586472/24413952 blocks
has the following meaning:
The partition that was checked is "/dev/sda"
The file system is "clean", i.e. there are no inconsistencies
"286631/6111232 files": The file system has been created to allow a maximum of 6,111,232 files, and currently there are 286,631 files,
"2586472/24413952 blocks": The storage capacity of the file system is 24,413,952 blocks (probably 4096 bytes each), and 2,586,472 blocks currently are in use.
This is an informational message confirming that the file system is ok. There is nothing that needs to be resolved or repaired.
2
While this may theoretically answer the question, it would be preferable to include the essential parts of the answer here, and provide the link for reference.
– karel
Aug 10 '16 at 5:16
Thanks for your informative reply. I know that this is not an issue but my nothing is happening afterwards. I do not have problem with this message. My question is more about how can I boot normally my computer since after this message nothing is happening.
– Mohamad Moosavi
Aug 10 '16 at 8:56
add a comment |
I think you have no problem. It's just a normal procedure in ubuntu versions 15 and newer. I offer a link to the explanation given by its author https://answers.launchpad.net/ubuntu/+question/293967
Ubuntu versions 15.04 and newer perform a quick file system check on the root disk and report the result on the screen.
The message
/dev/sda2: clean, 286631/6111232 files, 2586472/24413952 blocks
has the following meaning:
The partition that was checked is "/dev/sda"
The file system is "clean", i.e. there are no inconsistencies
"286631/6111232 files": The file system has been created to allow a maximum of 6,111,232 files, and currently there are 286,631 files,
"2586472/24413952 blocks": The storage capacity of the file system is 24,413,952 blocks (probably 4096 bytes each), and 2,586,472 blocks currently are in use.
This is an informational message confirming that the file system is ok. There is nothing that needs to be resolved or repaired.
I think you have no problem. It's just a normal procedure in ubuntu versions 15 and newer. I offer a link to the explanation given by its author https://answers.launchpad.net/ubuntu/+question/293967
Ubuntu versions 15.04 and newer perform a quick file system check on the root disk and report the result on the screen.
The message
/dev/sda2: clean, 286631/6111232 files, 2586472/24413952 blocks
has the following meaning:
The partition that was checked is "/dev/sda"
The file system is "clean", i.e. there are no inconsistencies
"286631/6111232 files": The file system has been created to allow a maximum of 6,111,232 files, and currently there are 286,631 files,
"2586472/24413952 blocks": The storage capacity of the file system is 24,413,952 blocks (probably 4096 bytes each), and 2,586,472 blocks currently are in use.
This is an informational message confirming that the file system is ok. There is nothing that needs to be resolved or repaired.
edited Aug 10 '16 at 8:19
Anwar
56k22145253
56k22145253
answered Aug 10 '16 at 4:19
NoobsterNoobster
5912
5912
2
While this may theoretically answer the question, it would be preferable to include the essential parts of the answer here, and provide the link for reference.
– karel
Aug 10 '16 at 5:16
Thanks for your informative reply. I know that this is not an issue but my nothing is happening afterwards. I do not have problem with this message. My question is more about how can I boot normally my computer since after this message nothing is happening.
– Mohamad Moosavi
Aug 10 '16 at 8:56
add a comment |
2
While this may theoretically answer the question, it would be preferable to include the essential parts of the answer here, and provide the link for reference.
– karel
Aug 10 '16 at 5:16
Thanks for your informative reply. I know that this is not an issue but my nothing is happening afterwards. I do not have problem with this message. My question is more about how can I boot normally my computer since after this message nothing is happening.
– Mohamad Moosavi
Aug 10 '16 at 8:56
2
2
While this may theoretically answer the question, it would be preferable to include the essential parts of the answer here, and provide the link for reference.
– karel
Aug 10 '16 at 5:16
While this may theoretically answer the question, it would be preferable to include the essential parts of the answer here, and provide the link for reference.
– karel
Aug 10 '16 at 5:16
Thanks for your informative reply. I know that this is not an issue but my nothing is happening afterwards. I do not have problem with this message. My question is more about how can I boot normally my computer since after this message nothing is happening.
– Mohamad Moosavi
Aug 10 '16 at 8:56
Thanks for your informative reply. I know that this is not an issue but my nothing is happening afterwards. I do not have problem with this message. My question is more about how can I boot normally my computer since after this message nothing is happening.
– Mohamad Moosavi
Aug 10 '16 at 8:56
add a comment |
Please try sudo systemctl start lightdm.service
This works for Ubuntu 16.04. Hope it helps.
Reference:
Ubuntu 16.04 Switch from Console to GUI
add a comment |
Please try sudo systemctl start lightdm.service
This works for Ubuntu 16.04. Hope it helps.
Reference:
Ubuntu 16.04 Switch from Console to GUI
add a comment |
Please try sudo systemctl start lightdm.service
This works for Ubuntu 16.04. Hope it helps.
Reference:
Ubuntu 16.04 Switch from Console to GUI
Please try sudo systemctl start lightdm.service
This works for Ubuntu 16.04. Hope it helps.
Reference:
Ubuntu 16.04 Switch from Console to GUI
answered Mar 24 '17 at 9:45
Bruce YoBruce Yo
86117
86117
add a comment |
add a comment |
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f809648%2fbooting-problem-after-upgrade-dev-sda2-clean%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Can you boot into
Recovery Mode
from GRUB menu?– Raphael
Aug 8 '16 at 13:58
When do you get this message? I see this kind of message while booting and the system boots normally.
– Anwar
Aug 8 '16 at 14:02
@AnwarShah - This error reproduces itself everytime I setup a new Minimal Ubuntu. So, I would then boot to recovery mode and after installation of
i3
, the system boots fine.– Raphael
Aug 8 '16 at 14:06
@AnwarShah It's not the same issue as "My Ubuntu is running fsck on every bootup" since their system boots normally after this message. My question is not about this message though. It's about why nothing is happening afterwards and my system does not boot.
– Mohamad Moosavi
Aug 10 '16 at 8:59
@Raphael I was not aware of that menu, I will try it as soon as I reach to my computer.
– Mohamad Moosavi
Aug 10 '16 at 9:00