Nikon D3400 aperture
up vote
4
down vote
favorite
I recently ordered the Nikon AF FX Nikkor 50mm f/1.8D Lens for my Nikon D3400, but when i try to take a picture, my aperture won’t open at all. I am shooting in manual but it still won’t work. I did buy the lens refurbished, so could there be something wrong with it or am I just doing something wrong?
nikon aperture
New contributor
add a comment |
up vote
4
down vote
favorite
I recently ordered the Nikon AF FX Nikkor 50mm f/1.8D Lens for my Nikon D3400, but when i try to take a picture, my aperture won’t open at all. I am shooting in manual but it still won’t work. I did buy the lens refurbished, so could there be something wrong with it or am I just doing something wrong?
nikon aperture
New contributor
2
you can unmount the lens and move the aperture lever by hand to check if it is working.
– Horitsu
Nov 27 at 5:14
well, what are you doing?
– osullic
Nov 27 at 9:51
5
What evidence has led you to the conclusion that your aperture is not opening? What did you do and what happened? We can't know if you've done something wrong if you don't tell us what you have done.
– J...
Nov 27 at 12:59
1
You say, "my aperture won’t open at all", but to be clear: are you saying you can't change the aperture size? Or do you mean that the shutter won't open when you press the shutter release button?
– scottbb
Nov 27 at 18:51
add a comment |
up vote
4
down vote
favorite
up vote
4
down vote
favorite
I recently ordered the Nikon AF FX Nikkor 50mm f/1.8D Lens for my Nikon D3400, but when i try to take a picture, my aperture won’t open at all. I am shooting in manual but it still won’t work. I did buy the lens refurbished, so could there be something wrong with it or am I just doing something wrong?
nikon aperture
New contributor
I recently ordered the Nikon AF FX Nikkor 50mm f/1.8D Lens for my Nikon D3400, but when i try to take a picture, my aperture won’t open at all. I am shooting in manual but it still won’t work. I did buy the lens refurbished, so could there be something wrong with it or am I just doing something wrong?
nikon aperture
nikon aperture
New contributor
New contributor
edited Nov 27 at 18:49
Community♦
1
1
New contributor
asked Nov 27 at 4:36
Ashlyn
211
211
New contributor
New contributor
2
you can unmount the lens and move the aperture lever by hand to check if it is working.
– Horitsu
Nov 27 at 5:14
well, what are you doing?
– osullic
Nov 27 at 9:51
5
What evidence has led you to the conclusion that your aperture is not opening? What did you do and what happened? We can't know if you've done something wrong if you don't tell us what you have done.
– J...
Nov 27 at 12:59
1
You say, "my aperture won’t open at all", but to be clear: are you saying you can't change the aperture size? Or do you mean that the shutter won't open when you press the shutter release button?
– scottbb
Nov 27 at 18:51
add a comment |
2
you can unmount the lens and move the aperture lever by hand to check if it is working.
– Horitsu
Nov 27 at 5:14
well, what are you doing?
– osullic
Nov 27 at 9:51
5
What evidence has led you to the conclusion that your aperture is not opening? What did you do and what happened? We can't know if you've done something wrong if you don't tell us what you have done.
– J...
Nov 27 at 12:59
1
You say, "my aperture won’t open at all", but to be clear: are you saying you can't change the aperture size? Or do you mean that the shutter won't open when you press the shutter release button?
– scottbb
Nov 27 at 18:51
2
2
you can unmount the lens and move the aperture lever by hand to check if it is working.
– Horitsu
Nov 27 at 5:14
you can unmount the lens and move the aperture lever by hand to check if it is working.
– Horitsu
Nov 27 at 5:14
well, what are you doing?
– osullic
Nov 27 at 9:51
well, what are you doing?
– osullic
Nov 27 at 9:51
5
5
What evidence has led you to the conclusion that your aperture is not opening? What did you do and what happened? We can't know if you've done something wrong if you don't tell us what you have done.
– J...
Nov 27 at 12:59
What evidence has led you to the conclusion that your aperture is not opening? What did you do and what happened? We can't know if you've done something wrong if you don't tell us what you have done.
– J...
Nov 27 at 12:59
1
1
You say, "my aperture won’t open at all", but to be clear: are you saying you can't change the aperture size? Or do you mean that the shutter won't open when you press the shutter release button?
– scottbb
Nov 27 at 18:51
You say, "my aperture won’t open at all", but to be clear: are you saying you can't change the aperture size? Or do you mean that the shutter won't open when you press the shutter release button?
– scottbb
Nov 27 at 18:51
add a comment |
2 Answers
2
active
oldest
votes
up vote
19
down vote
In order to control the aperture from the D3400 with an older 'D' type lens that has an aperture ring, you need to set the lens' aperture ring to the narrowest (highest f-number) and lock it there. If the aperture ring is in any other position, the camera will not operate the lens' aperture properly.
Keep in mind that there are a few other considerations with using an AF Nikkor 50mm f/1.8D on a D3400 body:
The big one is autofocus. Your D3400 does not have an autofocus motor in the body to drive Nikon 'AF' lenses, which have no focus motor in the lens, but only a mechanical screw drive connection that can be driven by a Nikon body with an in-body AF motor. To use autofocus with a D3400, you need lenses with AF motors in the lens, such as AF-S, AF-I, and AF-P lenses. Some D series lenses are "AF-S", but many more D series lenses are "AF" lenses with no AF motor in the lens. Even if you had a body with a built-in focus motor that can focus the D series AF lenses, the in-lens AF motors of AF-S lenses are usually faster and almost always quieter than a lens that has to be driven by the body's AF motor.
Comparable AF-S lenses are newer designs than their AF series counterparts when looking at the same focal lengths and maximum apertures. They usually have improved optical designs with more low dispersion and aspherical elements that help fight issues such as chromatic aberration and distortion and almost always have better lens coatings that reduce things such as flare and more rounded apertures that give better bokeh when used at wide apertures.
The AF-S Nikkor 50mm f/1.8G is a lens with an AF motor in the lens and a newer optical design when compared to the AF Nikkor 50mm f/1.8D.
add a comment |
up vote
-3
down vote
I have a defect lens with a similar problem. It does not open the aperture more than f5 even though it is specified with a maximum aperture of f3.5.
The cause (in my case) is most likely a broken ribbon cable (more precise: a flexible PCB) inside the lens, which transmits data from and to the lens. Along with that problem comes the fact, that some information like the used focal length is not transmitted to the camera body. You have a prime lens, so you have always a constant focal length, but you could check your EXIF data anyway to see, if you find something odd there.
New contributor
add a comment |
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
19
down vote
In order to control the aperture from the D3400 with an older 'D' type lens that has an aperture ring, you need to set the lens' aperture ring to the narrowest (highest f-number) and lock it there. If the aperture ring is in any other position, the camera will not operate the lens' aperture properly.
Keep in mind that there are a few other considerations with using an AF Nikkor 50mm f/1.8D on a D3400 body:
The big one is autofocus. Your D3400 does not have an autofocus motor in the body to drive Nikon 'AF' lenses, which have no focus motor in the lens, but only a mechanical screw drive connection that can be driven by a Nikon body with an in-body AF motor. To use autofocus with a D3400, you need lenses with AF motors in the lens, such as AF-S, AF-I, and AF-P lenses. Some D series lenses are "AF-S", but many more D series lenses are "AF" lenses with no AF motor in the lens. Even if you had a body with a built-in focus motor that can focus the D series AF lenses, the in-lens AF motors of AF-S lenses are usually faster and almost always quieter than a lens that has to be driven by the body's AF motor.
Comparable AF-S lenses are newer designs than their AF series counterparts when looking at the same focal lengths and maximum apertures. They usually have improved optical designs with more low dispersion and aspherical elements that help fight issues such as chromatic aberration and distortion and almost always have better lens coatings that reduce things such as flare and more rounded apertures that give better bokeh when used at wide apertures.
The AF-S Nikkor 50mm f/1.8G is a lens with an AF motor in the lens and a newer optical design when compared to the AF Nikkor 50mm f/1.8D.
add a comment |
up vote
19
down vote
In order to control the aperture from the D3400 with an older 'D' type lens that has an aperture ring, you need to set the lens' aperture ring to the narrowest (highest f-number) and lock it there. If the aperture ring is in any other position, the camera will not operate the lens' aperture properly.
Keep in mind that there are a few other considerations with using an AF Nikkor 50mm f/1.8D on a D3400 body:
The big one is autofocus. Your D3400 does not have an autofocus motor in the body to drive Nikon 'AF' lenses, which have no focus motor in the lens, but only a mechanical screw drive connection that can be driven by a Nikon body with an in-body AF motor. To use autofocus with a D3400, you need lenses with AF motors in the lens, such as AF-S, AF-I, and AF-P lenses. Some D series lenses are "AF-S", but many more D series lenses are "AF" lenses with no AF motor in the lens. Even if you had a body with a built-in focus motor that can focus the D series AF lenses, the in-lens AF motors of AF-S lenses are usually faster and almost always quieter than a lens that has to be driven by the body's AF motor.
Comparable AF-S lenses are newer designs than their AF series counterparts when looking at the same focal lengths and maximum apertures. They usually have improved optical designs with more low dispersion and aspherical elements that help fight issues such as chromatic aberration and distortion and almost always have better lens coatings that reduce things such as flare and more rounded apertures that give better bokeh when used at wide apertures.
The AF-S Nikkor 50mm f/1.8G is a lens with an AF motor in the lens and a newer optical design when compared to the AF Nikkor 50mm f/1.8D.
add a comment |
up vote
19
down vote
up vote
19
down vote
In order to control the aperture from the D3400 with an older 'D' type lens that has an aperture ring, you need to set the lens' aperture ring to the narrowest (highest f-number) and lock it there. If the aperture ring is in any other position, the camera will not operate the lens' aperture properly.
Keep in mind that there are a few other considerations with using an AF Nikkor 50mm f/1.8D on a D3400 body:
The big one is autofocus. Your D3400 does not have an autofocus motor in the body to drive Nikon 'AF' lenses, which have no focus motor in the lens, but only a mechanical screw drive connection that can be driven by a Nikon body with an in-body AF motor. To use autofocus with a D3400, you need lenses with AF motors in the lens, such as AF-S, AF-I, and AF-P lenses. Some D series lenses are "AF-S", but many more D series lenses are "AF" lenses with no AF motor in the lens. Even if you had a body with a built-in focus motor that can focus the D series AF lenses, the in-lens AF motors of AF-S lenses are usually faster and almost always quieter than a lens that has to be driven by the body's AF motor.
Comparable AF-S lenses are newer designs than their AF series counterparts when looking at the same focal lengths and maximum apertures. They usually have improved optical designs with more low dispersion and aspherical elements that help fight issues such as chromatic aberration and distortion and almost always have better lens coatings that reduce things such as flare and more rounded apertures that give better bokeh when used at wide apertures.
The AF-S Nikkor 50mm f/1.8G is a lens with an AF motor in the lens and a newer optical design when compared to the AF Nikkor 50mm f/1.8D.
In order to control the aperture from the D3400 with an older 'D' type lens that has an aperture ring, you need to set the lens' aperture ring to the narrowest (highest f-number) and lock it there. If the aperture ring is in any other position, the camera will not operate the lens' aperture properly.
Keep in mind that there are a few other considerations with using an AF Nikkor 50mm f/1.8D on a D3400 body:
The big one is autofocus. Your D3400 does not have an autofocus motor in the body to drive Nikon 'AF' lenses, which have no focus motor in the lens, but only a mechanical screw drive connection that can be driven by a Nikon body with an in-body AF motor. To use autofocus with a D3400, you need lenses with AF motors in the lens, such as AF-S, AF-I, and AF-P lenses. Some D series lenses are "AF-S", but many more D series lenses are "AF" lenses with no AF motor in the lens. Even if you had a body with a built-in focus motor that can focus the D series AF lenses, the in-lens AF motors of AF-S lenses are usually faster and almost always quieter than a lens that has to be driven by the body's AF motor.
Comparable AF-S lenses are newer designs than their AF series counterparts when looking at the same focal lengths and maximum apertures. They usually have improved optical designs with more low dispersion and aspherical elements that help fight issues such as chromatic aberration and distortion and almost always have better lens coatings that reduce things such as flare and more rounded apertures that give better bokeh when used at wide apertures.
The AF-S Nikkor 50mm f/1.8G is a lens with an AF motor in the lens and a newer optical design when compared to the AF Nikkor 50mm f/1.8D.
edited Nov 27 at 9:51
answered Nov 27 at 8:32
Michael Clark
126k7142356
126k7142356
add a comment |
add a comment |
up vote
-3
down vote
I have a defect lens with a similar problem. It does not open the aperture more than f5 even though it is specified with a maximum aperture of f3.5.
The cause (in my case) is most likely a broken ribbon cable (more precise: a flexible PCB) inside the lens, which transmits data from and to the lens. Along with that problem comes the fact, that some information like the used focal length is not transmitted to the camera body. You have a prime lens, so you have always a constant focal length, but you could check your EXIF data anyway to see, if you find something odd there.
New contributor
add a comment |
up vote
-3
down vote
I have a defect lens with a similar problem. It does not open the aperture more than f5 even though it is specified with a maximum aperture of f3.5.
The cause (in my case) is most likely a broken ribbon cable (more precise: a flexible PCB) inside the lens, which transmits data from and to the lens. Along with that problem comes the fact, that some information like the used focal length is not transmitted to the camera body. You have a prime lens, so you have always a constant focal length, but you could check your EXIF data anyway to see, if you find something odd there.
New contributor
add a comment |
up vote
-3
down vote
up vote
-3
down vote
I have a defect lens with a similar problem. It does not open the aperture more than f5 even though it is specified with a maximum aperture of f3.5.
The cause (in my case) is most likely a broken ribbon cable (more precise: a flexible PCB) inside the lens, which transmits data from and to the lens. Along with that problem comes the fact, that some information like the used focal length is not transmitted to the camera body. You have a prime lens, so you have always a constant focal length, but you could check your EXIF data anyway to see, if you find something odd there.
New contributor
I have a defect lens with a similar problem. It does not open the aperture more than f5 even though it is specified with a maximum aperture of f3.5.
The cause (in my case) is most likely a broken ribbon cable (more precise: a flexible PCB) inside the lens, which transmits data from and to the lens. Along with that problem comes the fact, that some information like the used focal length is not transmitted to the camera body. You have a prime lens, so you have always a constant focal length, but you could check your EXIF data anyway to see, if you find something odd there.
New contributor
New contributor
answered Nov 27 at 7:19
Peder
151
151
New contributor
New contributor
add a comment |
add a comment |
Ashlyn is a new contributor. Be nice, and check out our Code of Conduct.
Ashlyn is a new contributor. Be nice, and check out our Code of Conduct.
Ashlyn is a new contributor. Be nice, and check out our Code of Conduct.
Ashlyn is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Photography Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fphoto.stackexchange.com%2fquestions%2f103116%2fnikon-d3400-aperture%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
2
you can unmount the lens and move the aperture lever by hand to check if it is working.
– Horitsu
Nov 27 at 5:14
well, what are you doing?
– osullic
Nov 27 at 9:51
5
What evidence has led you to the conclusion that your aperture is not opening? What did you do and what happened? We can't know if you've done something wrong if you don't tell us what you have done.
– J...
Nov 27 at 12:59
1
You say, "my aperture won’t open at all", but to be clear: are you saying you can't change the aperture size? Or do you mean that the shutter won't open when you press the shutter release button?
– scottbb
Nov 27 at 18:51