Nvidia MX150 with Bumblebee on Debian Testing (Buster) [closed]











up vote
-1
down vote

favorite












I recently bought a Dell inspiron 15 7000 notebook with Nvidia MX150 and a second intel card:



$lspci -nn | egrep -i "3d|display|vga"
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:3ea0]
01:00.0 3D controller [0302]: NVIDIA Corporation GP108M [GeForce MX150] [10de:1d10] (rev ff)


I'm using debian testing and given the optimus technology I installed Bumblebee and mesa utils (I followed the official debian doc here):



sudo apt-get install bumblebee-nvidia primus



Running the glxgears -info command everything is ok, the window appears with the gears turning. But if instead I launch glxgears with optirun, nothing happens, no errors, and the window with gears does not open:



optirun --debug -vv glxgears -info
[ 860.333401] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 860.334195] [DEBUG]optirun version 3.2.1 starting...
[ 860.334225] [DEBUG]Active configuration:
[ 860.334232] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 860.334239] [DEBUG] X display: :8
[ 860.334246] [DEBUG] LD_LIBRARY_PATH: /usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
[ 860.334254] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 860.334261] [DEBUG] Accel/display bridge: auto
[ 860.334267] [DEBUG] VGL Compression: proxy
[ 860.334278] [DEBUG] VGLrun extra options:
[ 860.334285] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
[ 860.334383] [DEBUG]Using auto-detected bridge primus
[ 861.162170] [INFO]Response: Yes. X is active.

[ 861.162180] [INFO]Running application using primus.
[ 861.162271] [DEBUG]Process glxgears started, PID 2639.
[ 861.171160] [DEBUG]SIGCHILD received, but wait failed with No child processes
[ 861.171175] [DEBUG]Socket closed.
[ 861.171189] [DEBUG]Killing all remaining processes.


I do not think there are errors ....
This is the optirun and bbswitch state:



$optirun --status                     
Bumblebee status: Ready (3.2.1). X inactive. Discrete video card is off.

$cat /proc/acpi/bbswitch
0000:01:00.0 OFF


If I run something randomly with optirun, like Firefox and re run the above commands:



Shell1:



optirun firefox



Shell 2:



$optirun --status        
Bumblebee status: Ready (3.2.1). X is PID 2908, 1 applications using bumblebeed.

$cat /proc/acpi/bbswitch
0000:01:00.0 ON


it seems that with Firefox (a random thing) launched with optirun Bumblebee is active ...



Can I therefore deduce that it is a glxgears problem that does not appear, but is everything well configured? Or something is wrong?



Can you advise me some tests to do?



Thank you










share|improve this question







New contributor




matiux is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











closed as off-topic by Terrance, Charles Green, pomsky, N0rbert, karel Dec 7 at 23:00


This question appears to be off-topic. The users who voted to close gave this specific reason:


  • "This is not about Ubuntu. Questions about other Linux distributions can be asked on Unix & Linux, those about Windows on Super User, those about Apple products on Ask Different and generic programming questions on Stack Overflow." – Terrance, Charles Green, pomsky, N0rbert, karel

If this question can be reworded to fit the rules in the help center, please edit the question.













  • Which version of Ubuntu are you running?
    – Charles Green
    Dec 7 at 16:00






  • 1




    I'm on Debian Buster. But I have read that the procedure is the same between Debian and Ubuntu. So I thought of addressing the Ubuntu community as well
    – matiux
    Dec 7 at 16:04










  • K - several problems with this: 1) you're not using Ubuntu. 2) Debian Buster is a testing (unreleased) version, and this Q&A forum really only deals with versions of Ubuntu which are within the Ubuntu life-cycle. I would suggest moving this question to Unix & Lnux or a Debian specific forum
    – Charles Green
    Dec 7 at 16:08















up vote
-1
down vote

favorite












I recently bought a Dell inspiron 15 7000 notebook with Nvidia MX150 and a second intel card:



$lspci -nn | egrep -i "3d|display|vga"
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:3ea0]
01:00.0 3D controller [0302]: NVIDIA Corporation GP108M [GeForce MX150] [10de:1d10] (rev ff)


I'm using debian testing and given the optimus technology I installed Bumblebee and mesa utils (I followed the official debian doc here):



sudo apt-get install bumblebee-nvidia primus



Running the glxgears -info command everything is ok, the window appears with the gears turning. But if instead I launch glxgears with optirun, nothing happens, no errors, and the window with gears does not open:



optirun --debug -vv glxgears -info
[ 860.333401] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 860.334195] [DEBUG]optirun version 3.2.1 starting...
[ 860.334225] [DEBUG]Active configuration:
[ 860.334232] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 860.334239] [DEBUG] X display: :8
[ 860.334246] [DEBUG] LD_LIBRARY_PATH: /usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
[ 860.334254] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 860.334261] [DEBUG] Accel/display bridge: auto
[ 860.334267] [DEBUG] VGL Compression: proxy
[ 860.334278] [DEBUG] VGLrun extra options:
[ 860.334285] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
[ 860.334383] [DEBUG]Using auto-detected bridge primus
[ 861.162170] [INFO]Response: Yes. X is active.

[ 861.162180] [INFO]Running application using primus.
[ 861.162271] [DEBUG]Process glxgears started, PID 2639.
[ 861.171160] [DEBUG]SIGCHILD received, but wait failed with No child processes
[ 861.171175] [DEBUG]Socket closed.
[ 861.171189] [DEBUG]Killing all remaining processes.


I do not think there are errors ....
This is the optirun and bbswitch state:



$optirun --status                     
Bumblebee status: Ready (3.2.1). X inactive. Discrete video card is off.

$cat /proc/acpi/bbswitch
0000:01:00.0 OFF


If I run something randomly with optirun, like Firefox and re run the above commands:



Shell1:



optirun firefox



Shell 2:



$optirun --status        
Bumblebee status: Ready (3.2.1). X is PID 2908, 1 applications using bumblebeed.

$cat /proc/acpi/bbswitch
0000:01:00.0 ON


it seems that with Firefox (a random thing) launched with optirun Bumblebee is active ...



Can I therefore deduce that it is a glxgears problem that does not appear, but is everything well configured? Or something is wrong?



Can you advise me some tests to do?



Thank you










share|improve this question







New contributor




matiux is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











closed as off-topic by Terrance, Charles Green, pomsky, N0rbert, karel Dec 7 at 23:00


This question appears to be off-topic. The users who voted to close gave this specific reason:


  • "This is not about Ubuntu. Questions about other Linux distributions can be asked on Unix & Linux, those about Windows on Super User, those about Apple products on Ask Different and generic programming questions on Stack Overflow." – Terrance, Charles Green, pomsky, N0rbert, karel

If this question can be reworded to fit the rules in the help center, please edit the question.













  • Which version of Ubuntu are you running?
    – Charles Green
    Dec 7 at 16:00






  • 1




    I'm on Debian Buster. But I have read that the procedure is the same between Debian and Ubuntu. So I thought of addressing the Ubuntu community as well
    – matiux
    Dec 7 at 16:04










  • K - several problems with this: 1) you're not using Ubuntu. 2) Debian Buster is a testing (unreleased) version, and this Q&A forum really only deals with versions of Ubuntu which are within the Ubuntu life-cycle. I would suggest moving this question to Unix & Lnux or a Debian specific forum
    – Charles Green
    Dec 7 at 16:08













up vote
-1
down vote

favorite









up vote
-1
down vote

favorite











I recently bought a Dell inspiron 15 7000 notebook with Nvidia MX150 and a second intel card:



$lspci -nn | egrep -i "3d|display|vga"
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:3ea0]
01:00.0 3D controller [0302]: NVIDIA Corporation GP108M [GeForce MX150] [10de:1d10] (rev ff)


I'm using debian testing and given the optimus technology I installed Bumblebee and mesa utils (I followed the official debian doc here):



sudo apt-get install bumblebee-nvidia primus



Running the glxgears -info command everything is ok, the window appears with the gears turning. But if instead I launch glxgears with optirun, nothing happens, no errors, and the window with gears does not open:



optirun --debug -vv glxgears -info
[ 860.333401] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 860.334195] [DEBUG]optirun version 3.2.1 starting...
[ 860.334225] [DEBUG]Active configuration:
[ 860.334232] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 860.334239] [DEBUG] X display: :8
[ 860.334246] [DEBUG] LD_LIBRARY_PATH: /usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
[ 860.334254] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 860.334261] [DEBUG] Accel/display bridge: auto
[ 860.334267] [DEBUG] VGL Compression: proxy
[ 860.334278] [DEBUG] VGLrun extra options:
[ 860.334285] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
[ 860.334383] [DEBUG]Using auto-detected bridge primus
[ 861.162170] [INFO]Response: Yes. X is active.

[ 861.162180] [INFO]Running application using primus.
[ 861.162271] [DEBUG]Process glxgears started, PID 2639.
[ 861.171160] [DEBUG]SIGCHILD received, but wait failed with No child processes
[ 861.171175] [DEBUG]Socket closed.
[ 861.171189] [DEBUG]Killing all remaining processes.


I do not think there are errors ....
This is the optirun and bbswitch state:



$optirun --status                     
Bumblebee status: Ready (3.2.1). X inactive. Discrete video card is off.

$cat /proc/acpi/bbswitch
0000:01:00.0 OFF


If I run something randomly with optirun, like Firefox and re run the above commands:



Shell1:



optirun firefox



Shell 2:



$optirun --status        
Bumblebee status: Ready (3.2.1). X is PID 2908, 1 applications using bumblebeed.

$cat /proc/acpi/bbswitch
0000:01:00.0 ON


it seems that with Firefox (a random thing) launched with optirun Bumblebee is active ...



Can I therefore deduce that it is a glxgears problem that does not appear, but is everything well configured? Or something is wrong?



Can you advise me some tests to do?



Thank you










share|improve this question







New contributor




matiux is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











I recently bought a Dell inspiron 15 7000 notebook with Nvidia MX150 and a second intel card:



$lspci -nn | egrep -i "3d|display|vga"
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:3ea0]
01:00.0 3D controller [0302]: NVIDIA Corporation GP108M [GeForce MX150] [10de:1d10] (rev ff)


I'm using debian testing and given the optimus technology I installed Bumblebee and mesa utils (I followed the official debian doc here):



sudo apt-get install bumblebee-nvidia primus



Running the glxgears -info command everything is ok, the window appears with the gears turning. But if instead I launch glxgears with optirun, nothing happens, no errors, and the window with gears does not open:



optirun --debug -vv glxgears -info
[ 860.333401] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 860.334195] [DEBUG]optirun version 3.2.1 starting...
[ 860.334225] [DEBUG]Active configuration:
[ 860.334232] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 860.334239] [DEBUG] X display: :8
[ 860.334246] [DEBUG] LD_LIBRARY_PATH: /usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
[ 860.334254] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 860.334261] [DEBUG] Accel/display bridge: auto
[ 860.334267] [DEBUG] VGL Compression: proxy
[ 860.334278] [DEBUG] VGLrun extra options:
[ 860.334285] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
[ 860.334383] [DEBUG]Using auto-detected bridge primus
[ 861.162170] [INFO]Response: Yes. X is active.

[ 861.162180] [INFO]Running application using primus.
[ 861.162271] [DEBUG]Process glxgears started, PID 2639.
[ 861.171160] [DEBUG]SIGCHILD received, but wait failed with No child processes
[ 861.171175] [DEBUG]Socket closed.
[ 861.171189] [DEBUG]Killing all remaining processes.


I do not think there are errors ....
This is the optirun and bbswitch state:



$optirun --status                     
Bumblebee status: Ready (3.2.1). X inactive. Discrete video card is off.

$cat /proc/acpi/bbswitch
0000:01:00.0 OFF


If I run something randomly with optirun, like Firefox and re run the above commands:



Shell1:



optirun firefox



Shell 2:



$optirun --status        
Bumblebee status: Ready (3.2.1). X is PID 2908, 1 applications using bumblebeed.

$cat /proc/acpi/bbswitch
0000:01:00.0 ON


it seems that with Firefox (a random thing) launched with optirun Bumblebee is active ...



Can I therefore deduce that it is a glxgears problem that does not appear, but is everything well configured? Or something is wrong?



Can you advise me some tests to do?



Thank you







nvidia-optimus debian nvidia-prime






share|improve this question







New contributor




matiux is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











share|improve this question







New contributor




matiux is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









share|improve this question




share|improve this question






New contributor




matiux is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









asked Dec 7 at 15:36









matiux

1




1




New contributor




matiux is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.





New contributor





matiux is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.






matiux is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.




closed as off-topic by Terrance, Charles Green, pomsky, N0rbert, karel Dec 7 at 23:00


This question appears to be off-topic. The users who voted to close gave this specific reason:


  • "This is not about Ubuntu. Questions about other Linux distributions can be asked on Unix & Linux, those about Windows on Super User, those about Apple products on Ask Different and generic programming questions on Stack Overflow." – Terrance, Charles Green, pomsky, N0rbert, karel

If this question can be reworded to fit the rules in the help center, please edit the question.




closed as off-topic by Terrance, Charles Green, pomsky, N0rbert, karel Dec 7 at 23:00


This question appears to be off-topic. The users who voted to close gave this specific reason:


  • "This is not about Ubuntu. Questions about other Linux distributions can be asked on Unix & Linux, those about Windows on Super User, those about Apple products on Ask Different and generic programming questions on Stack Overflow." – Terrance, Charles Green, pomsky, N0rbert, karel

If this question can be reworded to fit the rules in the help center, please edit the question.












  • Which version of Ubuntu are you running?
    – Charles Green
    Dec 7 at 16:00






  • 1




    I'm on Debian Buster. But I have read that the procedure is the same between Debian and Ubuntu. So I thought of addressing the Ubuntu community as well
    – matiux
    Dec 7 at 16:04










  • K - several problems with this: 1) you're not using Ubuntu. 2) Debian Buster is a testing (unreleased) version, and this Q&A forum really only deals with versions of Ubuntu which are within the Ubuntu life-cycle. I would suggest moving this question to Unix & Lnux or a Debian specific forum
    – Charles Green
    Dec 7 at 16:08


















  • Which version of Ubuntu are you running?
    – Charles Green
    Dec 7 at 16:00






  • 1




    I'm on Debian Buster. But I have read that the procedure is the same between Debian and Ubuntu. So I thought of addressing the Ubuntu community as well
    – matiux
    Dec 7 at 16:04










  • K - several problems with this: 1) you're not using Ubuntu. 2) Debian Buster is a testing (unreleased) version, and this Q&A forum really only deals with versions of Ubuntu which are within the Ubuntu life-cycle. I would suggest moving this question to Unix & Lnux or a Debian specific forum
    – Charles Green
    Dec 7 at 16:08
















Which version of Ubuntu are you running?
– Charles Green
Dec 7 at 16:00




Which version of Ubuntu are you running?
– Charles Green
Dec 7 at 16:00




1




1




I'm on Debian Buster. But I have read that the procedure is the same between Debian and Ubuntu. So I thought of addressing the Ubuntu community as well
– matiux
Dec 7 at 16:04




I'm on Debian Buster. But I have read that the procedure is the same between Debian and Ubuntu. So I thought of addressing the Ubuntu community as well
– matiux
Dec 7 at 16:04












K - several problems with this: 1) you're not using Ubuntu. 2) Debian Buster is a testing (unreleased) version, and this Q&A forum really only deals with versions of Ubuntu which are within the Ubuntu life-cycle. I would suggest moving this question to Unix & Lnux or a Debian specific forum
– Charles Green
Dec 7 at 16:08




K - several problems with this: 1) you're not using Ubuntu. 2) Debian Buster is a testing (unreleased) version, and this Q&A forum really only deals with versions of Ubuntu which are within the Ubuntu life-cycle. I would suggest moving this question to Unix & Lnux or a Debian specific forum
– Charles Green
Dec 7 at 16:08















active

oldest

votes






















active

oldest

votes













active

oldest

votes









active

oldest

votes






active

oldest

votes

Popular posts from this blog

數位音樂下載

When can things happen in Etherscan, such as the picture below?

格利澤436b