Unable to change the refresh rate to 60hz with xrandr
up vote
4
down vote
favorite
My monitor supports 1920×1080 @ 60hz (LG W2486L) and graphic card (GeForce 9400 GT)
using Ubuntu 12.04.
When I type xrandr -q I get this:
xrandr -q
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1920 x 1080, current 1920 x 1080, maximum 1920 x 1080
default connected 1920x1080+0+0 0mm x 0mm
1920x1080 50.0*
1920x1080_59.90 59.9
1920x1080_60.00 60.0
Right now the refresh rate is on 50 and hurt my eyes real bad.
So I'm trying to change it to 60hz:
xrandr --output default --mode 1920x1080_60.00
xrandr: Failed to get size of gamma for output default
What I can do? I tried
gtf 1920 1080 60.0
# 1920x1080 @ 60.00 Hz (GTF) hsync: 67.08 kHz; pclk: 172.80 MHz
Modeline "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
xrandr --newmode "1920x1080_60.00" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
xrandr: Failed to get size of gamma for output default
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 153 (RANDR)
Minor opcode of failed request: 16 (RRCreateMode)
Serial number of failed request: 19
Current serial number in output stream: 19
xrandr --output default --mode 1920x1080_60.00
xrandr: Failed to get size of gamma for output default
Someone have the solution for this? I can't work on the PC like that, 50Hz is very low and can't look at the screen more than 5 mins.
Thank you!
12.04 nvidia xorg xrandr
edited Mar 9 '13 at 19:42
Kevin Bowen
14.2k145969
asked Mar 9 '13 at 17:38
Morti
2112
add a comment |
up vote
4
down vote
favorite
My monitor supports 1920×1080 @ 60hz (LG W2486L) and graphic card (GeForce 9400 GT)
using Ubuntu 12.04.
When I type xrandr -q I get this:
xrandr -q
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1920 x 1080, current 1920 x 1080, maximum 1920 x 1080
default connected 1920x1080+0+0 0mm x 0mm
1920x1080 50.0*
1920x1080_59.90 59.9
1920x1080_60.00 60.0
Right now the refresh rate is on 50 and hurt my eyes real bad.
So I'm trying to change it to 60hz:
xrandr --output default --mode 1920x1080_60.00
xrandr: Failed to get size of gamma for output default
What I can do? I tried
gtf 1920 1080 60.0
# 1920x1080 @ 60.00 Hz (GTF) hsync: 67.08 kHz; pclk: 172.80 MHz
Modeline "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
xrandr --newmode "1920x1080_60.00" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
xrandr: Failed to get size of gamma for output default
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 153 (RANDR)
Minor opcode of failed request: 16 (RRCreateMode)
Serial number of failed request: 19
Current serial number in output stream: 19
xrandr --output default --mode 1920x1080_60.00
xrandr: Failed to get size of gamma for output default
Someone have the solution for this? I can't work on the PC like that, 50Hz is very low and can't look at the screen more than 5 mins.
Thank you!
12.04 nvidia xorg xrandr
edited Mar 9 '13 at 19:42
Kevin Bowen
14.2k145969
asked Mar 9 '13 at 17:38
Morti
2112
Any reason why you hadclk 172.51instead of172.8as was calculated from GTF in your xrandr command?
– Takkat
Mar 9 '13 at 19:10
i don't know...
– Morti
Mar 10 '13 at 2:33
Just a commnent... Don't understand why this EOL Ubuntu 12.04 abandoned question got bumped to the home page when OP hasn't signed on in 4+ years (2 days after this question was posted) and therefore unlikely to confirm or deny any answers posted. Who exactly is thecommunitythatbumped to home page10 minutes ago?
– WinEunuuchs2Unix
Jul 29 '17 at 1:28
January 15, 2018 and this question from 2013 just got bumped by the robot again.
– WinEunuuchs2Unix
Jan 16 at 3:59
add a comment |
up vote
4
down vote
favorite
up vote
4
down vote
favorite
My monitor supports 1920×1080 @ 60hz (LG W2486L) and graphic card (GeForce 9400 GT)
using Ubuntu 12.04.
When I type xrandr -q I get this:
xrandr -q
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1920 x 1080, current 1920 x 1080, maximum 1920 x 1080
default connected 1920x1080+0+0 0mm x 0mm
1920x1080 50.0*
1920x1080_59.90 59.9
1920x1080_60.00 60.0
Right now the refresh rate is on 50 and hurt my eyes real bad.
So I'm trying to change it to 60hz:
xrandr --output default --mode 1920x1080_60.00
xrandr: Failed to get size of gamma for output default
What I can do? I tried
gtf 1920 1080 60.0
# 1920x1080 @ 60.00 Hz (GTF) hsync: 67.08 kHz; pclk: 172.80 MHz
Modeline "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
xrandr --newmode "1920x1080_60.00" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
xrandr: Failed to get size of gamma for output default
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 153 (RANDR)
Minor opcode of failed request: 16 (RRCreateMode)
Serial number of failed request: 19
Current serial number in output stream: 19
xrandr --output default --mode 1920x1080_60.00
xrandr: Failed to get size of gamma for output default
Someone have the solution for this? I can't work on the PC like that, 50Hz is very low and can't look at the screen more than 5 mins.
Thank you!
12.04 nvidia xorg xrandr
edited Mar 9 '13 at 19:42
Kevin Bowen
14.2k145969
asked Mar 9 '13 at 17:38
Morti
2112
My monitor supports 1920×1080 @ 60hz (LG W2486L) and graphic card (GeForce 9400 GT)
using Ubuntu 12.04.
When I type xrandr -q I get this:
xrandr -q
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1920 x 1080, current 1920 x 1080, maximum 1920 x 1080
default connected 1920x1080+0+0 0mm x 0mm
1920x1080 50.0*
1920x1080_59.90 59.9
1920x1080_60.00 60.0
Right now the refresh rate is on 50 and hurt my eyes real bad.
So I'm trying to change it to 60hz:
xrandr --output default --mode 1920x1080_60.00
xrandr: Failed to get size of gamma for output default
What I can do? I tried
gtf 1920 1080 60.0
# 1920x1080 @ 60.00 Hz (GTF) hsync: 67.08 kHz; pclk: 172.80 MHz
Modeline "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
xrandr --newmode "1920x1080_60.00" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
xrandr: Failed to get size of gamma for output default
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 153 (RANDR)
Minor opcode of failed request: 16 (RRCreateMode)
Serial number of failed request: 19
Current serial number in output stream: 19
xrandr --output default --mode 1920x1080_60.00
xrandr: Failed to get size of gamma for output default
Someone have the solution for this? I can't work on the PC like that, 50Hz is very low and can't look at the screen more than 5 mins.
Thank you!
12.04 nvidia xorg xrandr
12.04 nvidia xorg xrandr
edited Mar 9 '13 at 19:42
Kevin Bowen
14.2k145969
asked Mar 9 '13 at 17:38
Morti
2112
edited Mar 9 '13 at 19:42
Kevin Bowen
14.2k145969
asked Mar 9 '13 at 17:38
Morti
2112
edited Mar 9 '13 at 19:42
Kevin Bowen
14.2k145969
edited Mar 9 '13 at 19:42
Kevin Bowen
14.2k145969
edited Mar 9 '13 at 19:42
Kevin Bowen
14.2k145969
14.2k145969
asked Mar 9 '13 at 17:38
Morti
2112
asked Mar 9 '13 at 17:38
Morti
2112
asked Mar 9 '13 at 17:38
Morti
2112
2112
Any reason why you hadclk 172.51instead of172.8as was calculated from GTF in your xrandr command?
– Takkat
Mar 9 '13 at 19:10
i don't know...
– Morti
Mar 10 '13 at 2:33
Just a commnent... Don't understand why this EOL Ubuntu 12.04 abandoned question got bumped to the home page when OP hasn't signed on in 4+ years (2 days after this question was posted) and therefore unlikely to confirm or deny any answers posted. Who exactly is thecommunitythatbumped to home page10 minutes ago?
– WinEunuuchs2Unix
Jul 29 '17 at 1:28
January 15, 2018 and this question from 2013 just got bumped by the robot again.
– WinEunuuchs2Unix
Jan 16 at 3:59
add a comment |
Any reason why you hadclk 172.51instead of172.8as was calculated from GTF in your xrandr command?
– Takkat
Mar 9 '13 at 19:10
i don't know...
– Morti
Mar 10 '13 at 2:33
Just a commnent... Don't understand why this EOL Ubuntu 12.04 abandoned question got bumped to the home page when OP hasn't signed on in 4+ years (2 days after this question was posted) and therefore unlikely to confirm or deny any answers posted. Who exactly is thecommunitythatbumped to home page10 minutes ago?
– WinEunuuchs2Unix
Jul 29 '17 at 1:28
January 15, 2018 and this question from 2013 just got bumped by the robot again.
– WinEunuuchs2Unix
Jan 16 at 3:59
Any reason why you had
clk 172.51 instead of 172.8 as was calculated from GTF in your xrandr command?– Takkat
Mar 9 '13 at 19:10
Any reason why you had
clk 172.51 instead of 172.8 as was calculated from GTF in your xrandr command?– Takkat
Mar 9 '13 at 19:10
i don't know...
– Morti
Mar 10 '13 at 2:33
i don't know...
– Morti
Mar 10 '13 at 2:33
Just a commnent... Don't understand why this EOL Ubuntu 12.04 abandoned question got bumped to the home page when OP hasn't signed on in 4+ years (2 days after this question was posted) and therefore unlikely to confirm or deny any answers posted. Who exactly is the
community that bumped to home page 10 minutes ago?– WinEunuuchs2Unix
Jul 29 '17 at 1:28
Just a commnent... Don't understand why this EOL Ubuntu 12.04 abandoned question got bumped to the home page when OP hasn't signed on in 4+ years (2 days after this question was posted) and therefore unlikely to confirm or deny any answers posted. Who exactly is the
community that bumped to home page 10 minutes ago?– WinEunuuchs2Unix
Jul 29 '17 at 1:28
January 15, 2018 and this question from 2013 just got bumped by the robot again.
– WinEunuuchs2Unix
Jan 16 at 3:59
January 15, 2018 and this question from 2013 just got bumped by the robot again.
– WinEunuuchs2Unix
Jan 16 at 3:59
add a comment |
1 Answer
1
active
oldest
votes
up vote
0
down vote
Your xrandr -q output shows that you have 1920x1080_59.90 resolution available
You can use this to set the new resolution
xrandr --output default --mode 1920x1080_59.90
Also, if you are creating newmode using
xrandr --newmode "1920x1080_59.90" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
You also need to add this mode using
xrandr --addmode default 1920x1080_59.90
And then set the new resolution using
xrandr --output default --mode 1920x1080_59.90
answered Mar 9 '13 at 18:23
s.m
1,3342913
well after i reboot the pc, xrandr -q results change to: 1920x1080 50.0* 1680x1050 51.0 52.0 1600x1024 53.0 1440x900 54.0 and it make no sense, i should have 1920x1080 with 60hz
– Morti
Mar 10 '13 at 2:35
you have to write scripts to make it persistent on reboot
– s.m
Mar 10 '13 at 6:24
how can i do it?
– Morti
Mar 11 '13 at 16:22
put all the codes given above in a file and create a script, For example :Create xrandr.sh #!/bin/bash xrandr --newmode "1920x1080_59.90" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync xrandr --addmode default 1920x1080_59.90 xrandr --output default --mode 1920x1080_59.90 Then make this script to autorun on startup
– s.m
Mar 12 '13 at 7:34
You can even add this line Modeline "1920x1080_59.90" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync in the Monitor section of xorg.conf file in /etc/X11
– s.m
Mar 30 '13 at 14:23
add a comment |
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
Your xrandr -q output shows that you have 1920x1080_59.90 resolution available
You can use this to set the new resolution
xrandr --output default --mode 1920x1080_59.90
Also, if you are creating newmode using
xrandr --newmode "1920x1080_59.90" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
You also need to add this mode using
xrandr --addmode default 1920x1080_59.90
And then set the new resolution using
xrandr --output default --mode 1920x1080_59.90
answered Mar 9 '13 at 18:23
s.m
1,3342913
well after i reboot the pc, xrandr -q results change to: 1920x1080 50.0* 1680x1050 51.0 52.0 1600x1024 53.0 1440x900 54.0 and it make no sense, i should have 1920x1080 with 60hz
– Morti
Mar 10 '13 at 2:35
you have to write scripts to make it persistent on reboot
– s.m
Mar 10 '13 at 6:24
how can i do it?
– Morti
Mar 11 '13 at 16:22
put all the codes given above in a file and create a script, For example :Create xrandr.sh #!/bin/bash xrandr --newmode "1920x1080_59.90" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync xrandr --addmode default 1920x1080_59.90 xrandr --output default --mode 1920x1080_59.90 Then make this script to autorun on startup
– s.m
Mar 12 '13 at 7:34
You can even add this line Modeline "1920x1080_59.90" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync in the Monitor section of xorg.conf file in /etc/X11
– s.m
Mar 30 '13 at 14:23
add a comment |
up vote
0
down vote
Your xrandr -q output shows that you have 1920x1080_59.90 resolution available
You can use this to set the new resolution
xrandr --output default --mode 1920x1080_59.90
Also, if you are creating newmode using
xrandr --newmode "1920x1080_59.90" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
You also need to add this mode using
xrandr --addmode default 1920x1080_59.90
And then set the new resolution using
xrandr --output default --mode 1920x1080_59.90
answered Mar 9 '13 at 18:23
s.m
1,3342913
well after i reboot the pc, xrandr -q results change to: 1920x1080 50.0* 1680x1050 51.0 52.0 1600x1024 53.0 1440x900 54.0 and it make no sense, i should have 1920x1080 with 60hz
– Morti
Mar 10 '13 at 2:35
you have to write scripts to make it persistent on reboot
– s.m
Mar 10 '13 at 6:24
how can i do it?
– Morti
Mar 11 '13 at 16:22
put all the codes given above in a file and create a script, For example :Create xrandr.sh #!/bin/bash xrandr --newmode "1920x1080_59.90" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync xrandr --addmode default 1920x1080_59.90 xrandr --output default --mode 1920x1080_59.90 Then make this script to autorun on startup
– s.m
Mar 12 '13 at 7:34
You can even add this line Modeline "1920x1080_59.90" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync in the Monitor section of xorg.conf file in /etc/X11
– s.m
Mar 30 '13 at 14:23
add a comment |
up vote
0
down vote
up vote
0
down vote
Your xrandr -q output shows that you have 1920x1080_59.90 resolution available
You can use this to set the new resolution
xrandr --output default --mode 1920x1080_59.90
Also, if you are creating newmode using
xrandr --newmode "1920x1080_59.90" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
You also need to add this mode using
xrandr --addmode default 1920x1080_59.90
And then set the new resolution using
xrandr --output default --mode 1920x1080_59.90
answered Mar 9 '13 at 18:23
s.m
1,3342913
Your xrandr -q output shows that you have 1920x1080_59.90 resolution available
You can use this to set the new resolution
xrandr --output default --mode 1920x1080_59.90
Also, if you are creating newmode using
xrandr --newmode "1920x1080_59.90" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
You also need to add this mode using
xrandr --addmode default 1920x1080_59.90
And then set the new resolution using
xrandr --output default --mode 1920x1080_59.90
answered Mar 9 '13 at 18:23
s.m
1,3342913
edited Mar 9 '13 at 18:35
answered Mar 9 '13 at 18:23
s.m
1,3342913
answered Mar 9 '13 at 18:23
s.m
1,3342913
answered Mar 9 '13 at 18:23
s.m
1,3342913
1,3342913
well after i reboot the pc, xrandr -q results change to: 1920x1080 50.0* 1680x1050 51.0 52.0 1600x1024 53.0 1440x900 54.0 and it make no sense, i should have 1920x1080 with 60hz
– Morti
Mar 10 '13 at 2:35
you have to write scripts to make it persistent on reboot
– s.m
Mar 10 '13 at 6:24
how can i do it?
– Morti
Mar 11 '13 at 16:22
put all the codes given above in a file and create a script, For example :Create xrandr.sh #!/bin/bash xrandr --newmode "1920x1080_59.90" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync xrandr --addmode default 1920x1080_59.90 xrandr --output default --mode 1920x1080_59.90 Then make this script to autorun on startup
– s.m
Mar 12 '13 at 7:34
You can even add this line Modeline "1920x1080_59.90" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync in the Monitor section of xorg.conf file in /etc/X11
– s.m
Mar 30 '13 at 14:23
add a comment |
well after i reboot the pc, xrandr -q results change to: 1920x1080 50.0* 1680x1050 51.0 52.0 1600x1024 53.0 1440x900 54.0 and it make no sense, i should have 1920x1080 with 60hz
– Morti
Mar 10 '13 at 2:35
you have to write scripts to make it persistent on reboot
– s.m
Mar 10 '13 at 6:24
how can i do it?
– Morti
Mar 11 '13 at 16:22
put all the codes given above in a file and create a script, For example :Create xrandr.sh #!/bin/bash xrandr --newmode "1920x1080_59.90" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync xrandr --addmode default 1920x1080_59.90 xrandr --output default --mode 1920x1080_59.90 Then make this script to autorun on startup
– s.m
Mar 12 '13 at 7:34
You can even add this line Modeline "1920x1080_59.90" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync in the Monitor section of xorg.conf file in /etc/X11
– s.m
Mar 30 '13 at 14:23
well after i reboot the pc, xrandr -q results change to: 1920x1080 50.0* 1680x1050 51.0 52.0 1600x1024 53.0 1440x900 54.0 and it make no sense, i should have 1920x1080 with 60hz
– Morti
Mar 10 '13 at 2:35
well after i reboot the pc, xrandr -q results change to: 1920x1080 50.0* 1680x1050 51.0 52.0 1600x1024 53.0 1440x900 54.0 and it make no sense, i should have 1920x1080 with 60hz
– Morti
Mar 10 '13 at 2:35
you have to write scripts to make it persistent on reboot
– s.m
Mar 10 '13 at 6:24
you have to write scripts to make it persistent on reboot
– s.m
Mar 10 '13 at 6:24
how can i do it?
– Morti
Mar 11 '13 at 16:22
how can i do it?
– Morti
Mar 11 '13 at 16:22
put all the codes given above in a file and create a script, For example :Create xrandr.sh #!/bin/bash xrandr --newmode "1920x1080_59.90" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync xrandr --addmode default 1920x1080_59.90 xrandr --output default --mode 1920x1080_59.90 Then make this script to autorun on startup
– s.m
Mar 12 '13 at 7:34
put all the codes given above in a file and create a script, For example :Create xrandr.sh #!/bin/bash xrandr --newmode "1920x1080_59.90" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync xrandr --addmode default 1920x1080_59.90 xrandr --output default --mode 1920x1080_59.90 Then make this script to autorun on startup
– s.m
Mar 12 '13 at 7:34
You can even add this line Modeline "1920x1080_59.90" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync in the Monitor section of xorg.conf file in /etc/X11
– s.m
Mar 30 '13 at 14:23
You can even add this line Modeline "1920x1080_59.90" 172.51 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync in the Monitor section of xorg.conf file in /etc/X11
– s.m
Mar 30 '13 at 14:23
add a comment |
draft saved
draft discarded
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f265939%2funable-to-change-the-refresh-rate-to-60hz-with-xrandr%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Any reason why you had
clk 172.51instead of172.8as was calculated from GTF in your xrandr command?– Takkat
Mar 9 '13 at 19:10
i don't know...
– Morti
Mar 10 '13 at 2:33
Just a commnent... Don't understand why this EOL Ubuntu 12.04 abandoned question got bumped to the home page when OP hasn't signed on in 4+ years (2 days after this question was posted) and therefore unlikely to confirm or deny any answers posted. Who exactly is the
communitythatbumped to home page10 minutes ago?– WinEunuuchs2Unix
Jul 29 '17 at 1:28
January 15, 2018 and this question from 2013 just got bumped by the robot again.
– WinEunuuchs2Unix
Jan 16 at 3:59