USB wireless Netgear adapter Ubuntu 16.04
1
My netgear wireless adapter appears to be the same model as from this thread, but the steps didn't end up working out for me. No errors were given.
Note: This is the second attempt, so some files are already installed/updated. I'm on a fresh install of Ubuntu 16.04, I'm not used to the environment.
Here's the terminal after each step:
Note: I can't post more than 2 links, so I delete the http:// in front of the hits/gets.
$ lsusb
Bus 001 Device 005: ID 0846:9011 NetGear, Inc. WNDA3100v2 802.11abgn [Broadcom BCM4323]
$ sudo apt-get update
Hit:1 us.archive.ubuntu.com/ubuntu xenial InRelease
Get:2 us.archive.ubuntu.com/ubuntu xenial-updates InRelease [95.7 kB]
Hit:3 us.archive.ubuntu.com/ubuntu xenial-backports InRelease
Get:4 us.archive.ubuntu.com/ubuntu xenial-security InRelease [94.5 kB]
Fetched 190 kB in 1s (142 kB/s)
Reading package lists... Done
$ sudo apt-get install ndiswrapper-common ndiswrapper-utils-1.9
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'ndiswrapper' instead of 'ndiswrapper-common'
ndiswrapper is already the newest version (1.59-6).
ndiswrapper-utils-1.9 is already the newest version (1.59-6).
0 upgraded, 0 newly installed, 0 to remove and 59 not upgraded.
Downloaded the files from post #6 and put them onto my desktop.
$ arch
x86_64
$ cd ~/Desktop/Broadcom_bcm43xx_USB_32_64bit_v2
My command line now appears as:
shawn@shawn-Z68XP-UD3P:~/Desktop/Broadcom_bcm43xx_USB_32_64bit_v2$
As arch returned x84_64 I issued:
$ sudo ndiswrapper -i bcmn43xx64.inf
driver bcmn43xx64 is already installed
$ sudo ndiswrapper -ma
module configuration information is stored in /etc/modprobe.d/ndiswrapper.conf
This step didn't return any information back.
sudo depmod -a
This step also didn't return any information back.
sudo modprobe ndiswrapper
Thanks for any help. I was going to pm Chili555, the author of the answer to the previous thread, but I couldn't find an option. (Maybe I need more rep?)
Edit 1:
$ dmesg | grep ndis
[25668.481615] rndis_host 5-2:1.0 usb0: register 'rndis_host' at usb-0000:06:00.0-2, RNDIS device, 02:06:52:50:34:39
[25668.481640] usbcore: registered new interface driver rndis_host
[25668.490912] rndis_host 5-2:1.0 enp6s0u2: renamed from usb0
with the correct adapter in:
$ dmesg | grep ndis
[25668.481615] rndis_host 5-2:1.0 usb0: register 'rndis_host' at usb-0000:06:00.0-2, RNDIS device, 02:06:52:50:34:39
[25668.481640] usbcore: registered new interface driver rndis_host
[25668.490912] rndis_host 5-2:1.0 enp6s0u2: renamed from usb0
[27435.290896] rndis_host 5-2:1.0 enp6s0u2: unregister 'rndis_host' usb-0000:06:00.0-2, RNDIS device
[53404.308888] rndis_host 5-2:1.0 usb0: register 'rndis_host' at usb-0000:06:00.0-2, RNDIS device, 02:06:52:50:34:39
[53404.321914] rndis_host 5-2:1.0 enp6s0u2: renamed from usb0
[53499.506118] ndiswrapper: module verification failed: signature and/or required key missing - tainting kernel
[53499.507750] ndiswrapper version 1.59 loaded (smp=yes, preempt=no)
[53499.681200] ndiswrapper: driver bcmn43xx64 (,08/26/2009, 5.10.79.30) loaded
[53499.788872] rndis_host 5-2:1.0 enp6s0u2: unregister 'rndis_host' usb-0000:06:00.0-2, RNDIS device
[53500.230542] usbcore: registered new interface driver ndiswrapper
[53500.236500] ndiswrapper 1-1.4:1.0 enxe0469a00acaa: renamed from wlan0
[53500.261564] ndiswrapper: interface renamed to 'enxe0469a00acaa'
[53522.657592] rndis_host 5-2:1.0 usb0: register 'rndis_host' at usb-0000:06:00.0-2, RNDIS device, 02:06:52:50:34:39
[53522.676968] rndis_host 5-2:1.0 enp6s0u2: renamed from usb0
drivers wireless netgear
edited Feb 17 '17 at 8:56
David Foerster
28.2k1365111
asked Aug 19 '16 at 22:52
Shawn BaumbachShawn Baumbach
613
bumped to the homepage by Community♦ yesterday
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
|
show 3 more comments
1
My netgear wireless adapter appears to be the same model as from this thread, but the steps didn't end up working out for me. No errors were given.
Note: This is the second attempt, so some files are already installed/updated. I'm on a fresh install of Ubuntu 16.04, I'm not used to the environment.
Here's the terminal after each step:
Note: I can't post more than 2 links, so I delete the http:// in front of the hits/gets.
$ lsusb
Bus 001 Device 005: ID 0846:9011 NetGear, Inc. WNDA3100v2 802.11abgn [Broadcom BCM4323]
$ sudo apt-get update
Hit:1 us.archive.ubuntu.com/ubuntu xenial InRelease
Get:2 us.archive.ubuntu.com/ubuntu xenial-updates InRelease [95.7 kB]
Hit:3 us.archive.ubuntu.com/ubuntu xenial-backports InRelease
Get:4 us.archive.ubuntu.com/ubuntu xenial-security InRelease [94.5 kB]
Fetched 190 kB in 1s (142 kB/s)
Reading package lists... Done
$ sudo apt-get install ndiswrapper-common ndiswrapper-utils-1.9
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'ndiswrapper' instead of 'ndiswrapper-common'
ndiswrapper is already the newest version (1.59-6).
ndiswrapper-utils-1.9 is already the newest version (1.59-6).
0 upgraded, 0 newly installed, 0 to remove and 59 not upgraded.
Downloaded the files from post #6 and put them onto my desktop.
$ arch
x86_64
$ cd ~/Desktop/Broadcom_bcm43xx_USB_32_64bit_v2
My command line now appears as:
shawn@shawn-Z68XP-UD3P:~/Desktop/Broadcom_bcm43xx_USB_32_64bit_v2$
As arch returned x84_64 I issued:
$ sudo ndiswrapper -i bcmn43xx64.inf
driver bcmn43xx64 is already installed
$ sudo ndiswrapper -ma
module configuration information is stored in /etc/modprobe.d/ndiswrapper.conf
This step didn't return any information back.
sudo depmod -a
This step also didn't return any information back.
sudo modprobe ndiswrapper
Thanks for any help. I was going to pm Chili555, the author of the answer to the previous thread, but I couldn't find an option. (Maybe I need more rep?)
Edit 1:
$ dmesg | grep ndis
[25668.481615] rndis_host 5-2:1.0 usb0: register 'rndis_host' at usb-0000:06:00.0-2, RNDIS device, 02:06:52:50:34:39
[25668.481640] usbcore: registered new interface driver rndis_host
[25668.490912] rndis_host 5-2:1.0 enp6s0u2: renamed from usb0
with the correct adapter in:
$ dmesg | grep ndis
[25668.481615] rndis_host 5-2:1.0 usb0: register 'rndis_host' at usb-0000:06:00.0-2, RNDIS device, 02:06:52:50:34:39
[25668.481640] usbcore: registered new interface driver rndis_host
[25668.490912] rndis_host 5-2:1.0 enp6s0u2: renamed from usb0
[27435.290896] rndis_host 5-2:1.0 enp6s0u2: unregister 'rndis_host' usb-0000:06:00.0-2, RNDIS device
[53404.308888] rndis_host 5-2:1.0 usb0: register 'rndis_host' at usb-0000:06:00.0-2, RNDIS device, 02:06:52:50:34:39
[53404.321914] rndis_host 5-2:1.0 enp6s0u2: renamed from usb0
[53499.506118] ndiswrapper: module verification failed: signature and/or required key missing - tainting kernel
[53499.507750] ndiswrapper version 1.59 loaded (smp=yes, preempt=no)
[53499.681200] ndiswrapper: driver bcmn43xx64 (,08/26/2009, 5.10.79.30) loaded
[53499.788872] rndis_host 5-2:1.0 enp6s0u2: unregister 'rndis_host' usb-0000:06:00.0-2, RNDIS device
[53500.230542] usbcore: registered new interface driver ndiswrapper
[53500.236500] ndiswrapper 1-1.4:1.0 enxe0469a00acaa: renamed from wlan0
[53500.261564] ndiswrapper: interface renamed to 'enxe0469a00acaa'
[53522.657592] rndis_host 5-2:1.0 usb0: register 'rndis_host' at usb-0000:06:00.0-2, RNDIS device, 02:06:52:50:34:39
[53522.676968] rndis_host 5-2:1.0 enp6s0u2: renamed from usb0
drivers wireless netgear
edited Feb 17 '17 at 8:56
David Foerster
28.2k1365111
asked Aug 19 '16 at 22:52
Shawn BaumbachShawn Baumbach
613
bumped to the homepage by Community♦ yesterday
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
You can always PM me on ubuntuforums.org. However, let's crack the case right here. What is the result of these terminal commands:sudo modprobe ndiswrapperand also:dmesg | grep ndisWelcome to askubuntu.
– chili555
Aug 20 '16 at 14:34
The terminal didn't return anything to me. Thanks for coming to the rescue. :D
– Shawn Baumbach
Aug 20 '16 at 18:47
1
The terminal didn't return anything to me for "sudo modprobe ndsiwrapper" The first time I ran it during step 10. Now I get "modprobe: FATAL: Module ndsiwrapper not found in directory /lib/modules/4.4.0-34-generic" But I didn't redo all of the steps, do I need to? I edited dmesg grep ndis into the bottom of my main, also ran without redoing the steps. Gonna have to go to work in a few minutes.
– Shawn Baumbach
Aug 20 '16 at 19:12
I would try again:sudo apt-get install --reinstall ndiswrapperand next:sudo apt-get install ndiswrapper-dkmsand finally:sudo modprobe ndiswrapperAny errors, warnings, etc.?
– chili555
Aug 20 '16 at 20:02
Ah, sorry, I forgot I had my other adapter installed (Was trying to get it to work after giving up on this one) I reran dmesg | grep ndis and got a entirely different result. ndis modprbe ndiswrapper didn't return anything. I'll put the dmesg into edit 2) up above.
– Shawn Baumbach
Aug 21 '16 at 2:32
|
show 3 more comments
1
1
1
My netgear wireless adapter appears to be the same model as from this thread, but the steps didn't end up working out for me. No errors were given.
Note: This is the second attempt, so some files are already installed/updated. I'm on a fresh install of Ubuntu 16.04, I'm not used to the environment.
Here's the terminal after each step:
Note: I can't post more than 2 links, so I delete the http:// in front of the hits/gets.
$ lsusb
Bus 001 Device 005: ID 0846:9011 NetGear, Inc. WNDA3100v2 802.11abgn [Broadcom BCM4323]
$ sudo apt-get update
Hit:1 us.archive.ubuntu.com/ubuntu xenial InRelease
Get:2 us.archive.ubuntu.com/ubuntu xenial-updates InRelease [95.7 kB]
Hit:3 us.archive.ubuntu.com/ubuntu xenial-backports InRelease
Get:4 us.archive.ubuntu.com/ubuntu xenial-security InRelease [94.5 kB]
Fetched 190 kB in 1s (142 kB/s)
Reading package lists... Done
$ sudo apt-get install ndiswrapper-common ndiswrapper-utils-1.9
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'ndiswrapper' instead of 'ndiswrapper-common'
ndiswrapper is already the newest version (1.59-6).
ndiswrapper-utils-1.9 is already the newest version (1.59-6).
0 upgraded, 0 newly installed, 0 to remove and 59 not upgraded.
Downloaded the files from post #6 and put them onto my desktop.
$ arch
x86_64
$ cd ~/Desktop/Broadcom_bcm43xx_USB_32_64bit_v2
My command line now appears as:
shawn@shawn-Z68XP-UD3P:~/Desktop/Broadcom_bcm43xx_USB_32_64bit_v2$
As arch returned x84_64 I issued:
$ sudo ndiswrapper -i bcmn43xx64.inf
driver bcmn43xx64 is already installed
$ sudo ndiswrapper -ma
module configuration information is stored in /etc/modprobe.d/ndiswrapper.conf
This step didn't return any information back.
sudo depmod -a
This step also didn't return any information back.
sudo modprobe ndiswrapper
Thanks for any help. I was going to pm Chili555, the author of the answer to the previous thread, but I couldn't find an option. (Maybe I need more rep?)
Edit 1:
$ dmesg | grep ndis
[25668.481615] rndis_host 5-2:1.0 usb0: register 'rndis_host' at usb-0000:06:00.0-2, RNDIS device, 02:06:52:50:34:39
[25668.481640] usbcore: registered new interface driver rndis_host
[25668.490912] rndis_host 5-2:1.0 enp6s0u2: renamed from usb0
with the correct adapter in:
$ dmesg | grep ndis
[25668.481615] rndis_host 5-2:1.0 usb0: register 'rndis_host' at usb-0000:06:00.0-2, RNDIS device, 02:06:52:50:34:39
[25668.481640] usbcore: registered new interface driver rndis_host
[25668.490912] rndis_host 5-2:1.0 enp6s0u2: renamed from usb0
[27435.290896] rndis_host 5-2:1.0 enp6s0u2: unregister 'rndis_host' usb-0000:06:00.0-2, RNDIS device
[53404.308888] rndis_host 5-2:1.0 usb0: register 'rndis_host' at usb-0000:06:00.0-2, RNDIS device, 02:06:52:50:34:39
[53404.321914] rndis_host 5-2:1.0 enp6s0u2: renamed from usb0
[53499.506118] ndiswrapper: module verification failed: signature and/or required key missing - tainting kernel
[53499.507750] ndiswrapper version 1.59 loaded (smp=yes, preempt=no)
[53499.681200] ndiswrapper: driver bcmn43xx64 (,08/26/2009, 5.10.79.30) loaded
[53499.788872] rndis_host 5-2:1.0 enp6s0u2: unregister 'rndis_host' usb-0000:06:00.0-2, RNDIS device
[53500.230542] usbcore: registered new interface driver ndiswrapper
[53500.236500] ndiswrapper 1-1.4:1.0 enxe0469a00acaa: renamed from wlan0
[53500.261564] ndiswrapper: interface renamed to 'enxe0469a00acaa'
[53522.657592] rndis_host 5-2:1.0 usb0: register 'rndis_host' at usb-0000:06:00.0-2, RNDIS device, 02:06:52:50:34:39
[53522.676968] rndis_host 5-2:1.0 enp6s0u2: renamed from usb0
drivers wireless netgear
edited Feb 17 '17 at 8:56
David Foerster
28.2k1365111
asked Aug 19 '16 at 22:52
Shawn BaumbachShawn Baumbach
613
My netgear wireless adapter appears to be the same model as from this thread, but the steps didn't end up working out for me. No errors were given.
Note: This is the second attempt, so some files are already installed/updated. I'm on a fresh install of Ubuntu 16.04, I'm not used to the environment.
Here's the terminal after each step:
Note: I can't post more than 2 links, so I delete the http:// in front of the hits/gets.
$ lsusb
Bus 001 Device 005: ID 0846:9011 NetGear, Inc. WNDA3100v2 802.11abgn [Broadcom BCM4323]
$ sudo apt-get update
Hit:1 us.archive.ubuntu.com/ubuntu xenial InRelease
Get:2 us.archive.ubuntu.com/ubuntu xenial-updates InRelease [95.7 kB]
Hit:3 us.archive.ubuntu.com/ubuntu xenial-backports InRelease
Get:4 us.archive.ubuntu.com/ubuntu xenial-security InRelease [94.5 kB]
Fetched 190 kB in 1s (142 kB/s)
Reading package lists... Done
$ sudo apt-get install ndiswrapper-common ndiswrapper-utils-1.9
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'ndiswrapper' instead of 'ndiswrapper-common'
ndiswrapper is already the newest version (1.59-6).
ndiswrapper-utils-1.9 is already the newest version (1.59-6).
0 upgraded, 0 newly installed, 0 to remove and 59 not upgraded.
Downloaded the files from post #6 and put them onto my desktop.
$ arch
x86_64
$ cd ~/Desktop/Broadcom_bcm43xx_USB_32_64bit_v2
My command line now appears as:
shawn@shawn-Z68XP-UD3P:~/Desktop/Broadcom_bcm43xx_USB_32_64bit_v2$
As arch returned x84_64 I issued:
$ sudo ndiswrapper -i bcmn43xx64.inf
driver bcmn43xx64 is already installed
$ sudo ndiswrapper -ma
module configuration information is stored in /etc/modprobe.d/ndiswrapper.conf
This step didn't return any information back.
sudo depmod -a
This step also didn't return any information back.
sudo modprobe ndiswrapper
Thanks for any help. I was going to pm Chili555, the author of the answer to the previous thread, but I couldn't find an option. (Maybe I need more rep?)
Edit 1:
$ dmesg | grep ndis
[25668.481615] rndis_host 5-2:1.0 usb0: register 'rndis_host' at usb-0000:06:00.0-2, RNDIS device, 02:06:52:50:34:39
[25668.481640] usbcore: registered new interface driver rndis_host
[25668.490912] rndis_host 5-2:1.0 enp6s0u2: renamed from usb0
with the correct adapter in:
$ dmesg | grep ndis
[25668.481615] rndis_host 5-2:1.0 usb0: register 'rndis_host' at usb-0000:06:00.0-2, RNDIS device, 02:06:52:50:34:39
[25668.481640] usbcore: registered new interface driver rndis_host
[25668.490912] rndis_host 5-2:1.0 enp6s0u2: renamed from usb0
[27435.290896] rndis_host 5-2:1.0 enp6s0u2: unregister 'rndis_host' usb-0000:06:00.0-2, RNDIS device
[53404.308888] rndis_host 5-2:1.0 usb0: register 'rndis_host' at usb-0000:06:00.0-2, RNDIS device, 02:06:52:50:34:39
[53404.321914] rndis_host 5-2:1.0 enp6s0u2: renamed from usb0
[53499.506118] ndiswrapper: module verification failed: signature and/or required key missing - tainting kernel
[53499.507750] ndiswrapper version 1.59 loaded (smp=yes, preempt=no)
[53499.681200] ndiswrapper: driver bcmn43xx64 (,08/26/2009, 5.10.79.30) loaded
[53499.788872] rndis_host 5-2:1.0 enp6s0u2: unregister 'rndis_host' usb-0000:06:00.0-2, RNDIS device
[53500.230542] usbcore: registered new interface driver ndiswrapper
[53500.236500] ndiswrapper 1-1.4:1.0 enxe0469a00acaa: renamed from wlan0
[53500.261564] ndiswrapper: interface renamed to 'enxe0469a00acaa'
[53522.657592] rndis_host 5-2:1.0 usb0: register 'rndis_host' at usb-0000:06:00.0-2, RNDIS device, 02:06:52:50:34:39
[53522.676968] rndis_host 5-2:1.0 enp6s0u2: renamed from usb0
drivers wireless netgear
drivers wireless netgear
edited Feb 17 '17 at 8:56
David Foerster
28.2k1365111
asked Aug 19 '16 at 22:52
Shawn BaumbachShawn Baumbach
613
edited Feb 17 '17 at 8:56
David Foerster
28.2k1365111
asked Aug 19 '16 at 22:52
Shawn BaumbachShawn Baumbach
613
edited Feb 17 '17 at 8:56
David Foerster
28.2k1365111
edited Feb 17 '17 at 8:56
David Foerster
28.2k1365111
edited Feb 17 '17 at 8:56
David Foerster
28.2k1365111
28.2k1365111
asked Aug 19 '16 at 22:52
Shawn BaumbachShawn Baumbach
613
asked Aug 19 '16 at 22:52
Shawn BaumbachShawn Baumbach
613
asked Aug 19 '16 at 22:52
Shawn BaumbachShawn Baumbach
613
613
bumped to the homepage by Community♦ yesterday
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
bumped to the homepage by Community♦ yesterday
This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
You can always PM me on ubuntuforums.org. However, let's crack the case right here. What is the result of these terminal commands:sudo modprobe ndiswrapperand also:dmesg | grep ndisWelcome to askubuntu.
– chili555
Aug 20 '16 at 14:34
The terminal didn't return anything to me. Thanks for coming to the rescue. :D
– Shawn Baumbach
Aug 20 '16 at 18:47
1
The terminal didn't return anything to me for "sudo modprobe ndsiwrapper" The first time I ran it during step 10. Now I get "modprobe: FATAL: Module ndsiwrapper not found in directory /lib/modules/4.4.0-34-generic" But I didn't redo all of the steps, do I need to? I edited dmesg grep ndis into the bottom of my main, also ran without redoing the steps. Gonna have to go to work in a few minutes.
– Shawn Baumbach
Aug 20 '16 at 19:12
I would try again:sudo apt-get install --reinstall ndiswrapperand next:sudo apt-get install ndiswrapper-dkmsand finally:sudo modprobe ndiswrapperAny errors, warnings, etc.?
– chili555
Aug 20 '16 at 20:02
Ah, sorry, I forgot I had my other adapter installed (Was trying to get it to work after giving up on this one) I reran dmesg | grep ndis and got a entirely different result. ndis modprbe ndiswrapper didn't return anything. I'll put the dmesg into edit 2) up above.
– Shawn Baumbach
Aug 21 '16 at 2:32
|
show 3 more comments
You can always PM me on ubuntuforums.org. However, let's crack the case right here. What is the result of these terminal commands:sudo modprobe ndiswrapperand also:dmesg | grep ndisWelcome to askubuntu.
– chili555
Aug 20 '16 at 14:34
The terminal didn't return anything to me. Thanks for coming to the rescue. :D
– Shawn Baumbach
Aug 20 '16 at 18:47
1
The terminal didn't return anything to me for "sudo modprobe ndsiwrapper" The first time I ran it during step 10. Now I get "modprobe: FATAL: Module ndsiwrapper not found in directory /lib/modules/4.4.0-34-generic" But I didn't redo all of the steps, do I need to? I edited dmesg grep ndis into the bottom of my main, also ran without redoing the steps. Gonna have to go to work in a few minutes.
– Shawn Baumbach
Aug 20 '16 at 19:12
I would try again:sudo apt-get install --reinstall ndiswrapperand next:sudo apt-get install ndiswrapper-dkmsand finally:sudo modprobe ndiswrapperAny errors, warnings, etc.?
– chili555
Aug 20 '16 at 20:02
Ah, sorry, I forgot I had my other adapter installed (Was trying to get it to work after giving up on this one) I reran dmesg | grep ndis and got a entirely different result. ndis modprbe ndiswrapper didn't return anything. I'll put the dmesg into edit 2) up above.
– Shawn Baumbach
Aug 21 '16 at 2:32
You can always PM me on ubuntuforums.org. However, let's crack the case right here. What is the result of these terminal commands:
sudo modprobe ndiswrapper and also: dmesg | grep ndis Welcome to askubuntu.– chili555
Aug 20 '16 at 14:34
You can always PM me on ubuntuforums.org. However, let's crack the case right here. What is the result of these terminal commands:
sudo modprobe ndiswrapper and also: dmesg | grep ndis Welcome to askubuntu.– chili555
Aug 20 '16 at 14:34
The terminal didn't return anything to me. Thanks for coming to the rescue. :D
– Shawn Baumbach
Aug 20 '16 at 18:47
The terminal didn't return anything to me. Thanks for coming to the rescue. :D
– Shawn Baumbach
Aug 20 '16 at 18:47
1
1
The terminal didn't return anything to me for "sudo modprobe ndsiwrapper" The first time I ran it during step 10. Now I get "modprobe: FATAL: Module ndsiwrapper not found in directory /lib/modules/4.4.0-34-generic" But I didn't redo all of the steps, do I need to? I edited dmesg grep ndis into the bottom of my main, also ran without redoing the steps. Gonna have to go to work in a few minutes.
– Shawn Baumbach
Aug 20 '16 at 19:12
The terminal didn't return anything to me for "sudo modprobe ndsiwrapper" The first time I ran it during step 10. Now I get "modprobe: FATAL: Module ndsiwrapper not found in directory /lib/modules/4.4.0-34-generic" But I didn't redo all of the steps, do I need to? I edited dmesg grep ndis into the bottom of my main, also ran without redoing the steps. Gonna have to go to work in a few minutes.
– Shawn Baumbach
Aug 20 '16 at 19:12
I would try again:
sudo apt-get install --reinstall ndiswrapper and next:sudo apt-get install ndiswrapper-dkms and finally: sudo modprobe ndiswrapper Any errors, warnings, etc.?– chili555
Aug 20 '16 at 20:02
I would try again:
sudo apt-get install --reinstall ndiswrapper and next:sudo apt-get install ndiswrapper-dkms and finally: sudo modprobe ndiswrapper Any errors, warnings, etc.?– chili555
Aug 20 '16 at 20:02
Ah, sorry, I forgot I had my other adapter installed (Was trying to get it to work after giving up on this one) I reran dmesg | grep ndis and got a entirely different result. ndis modprbe ndiswrapper didn't return anything. I'll put the dmesg into edit 2) up above.
– Shawn Baumbach
Aug 21 '16 at 2:32
Ah, sorry, I forgot I had my other adapter installed (Was trying to get it to work after giving up on this one) I reran dmesg | grep ndis and got a entirely different result. ndis modprbe ndiswrapper didn't return anything. I'll put the dmesg into edit 2) up above.
– Shawn Baumbach
Aug 21 '16 at 2:32
|
show 3 more comments
1 Answer
1
active
oldest
votes
0
According to the comments reinstalling ndiswrapper and reperforming the steps following the installation fixed the issue. To reinstall ndiswrapper:
sudo apt-get install --reinstall ndiswrapper ndiswrapper-dkms
As you’re a reputation 6 user: if this answers your question, don’t forget to click the grey ☑ under the “0” at the left of this text to accept it, which means “yes, this answer is valid”!
– David Foerster
Feb 17 '17 at 9:10
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f814364%2fusb-wireless-netgear-adapter-ubuntu-16-04%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
0
According to the comments reinstalling ndiswrapper and reperforming the steps following the installation fixed the issue. To reinstall ndiswrapper:
sudo apt-get install --reinstall ndiswrapper ndiswrapper-dkms
As you’re a reputation 6 user: if this answers your question, don’t forget to click the grey ☑ under the “0” at the left of this text to accept it, which means “yes, this answer is valid”!
– David Foerster
Feb 17 '17 at 9:10
add a comment |
0
According to the comments reinstalling ndiswrapper and reperforming the steps following the installation fixed the issue. To reinstall ndiswrapper:
sudo apt-get install --reinstall ndiswrapper ndiswrapper-dkms
As you’re a reputation 6 user: if this answers your question, don’t forget to click the grey ☑ under the “0” at the left of this text to accept it, which means “yes, this answer is valid”!
– David Foerster
Feb 17 '17 at 9:10
add a comment |
0
0
0
According to the comments reinstalling ndiswrapper and reperforming the steps following the installation fixed the issue. To reinstall ndiswrapper:
sudo apt-get install --reinstall ndiswrapper ndiswrapper-dkms
According to the comments reinstalling ndiswrapper and reperforming the steps following the installation fixed the issue. To reinstall ndiswrapper:
sudo apt-get install --reinstall ndiswrapper ndiswrapper-dkms
answered Feb 17 '17 at 9:02
community wiki
David Foerster
As you’re a reputation 6 user: if this answers your question, don’t forget to click the grey ☑ under the “0” at the left of this text to accept it, which means “yes, this answer is valid”!
– David Foerster
Feb 17 '17 at 9:10
add a comment |
As you’re a reputation 6 user: if this answers your question, don’t forget to click the grey ☑ under the “0” at the left of this text to accept it, which means “yes, this answer is valid”!
– David Foerster
Feb 17 '17 at 9:10
As you’re a reputation 6 user: if this answers your question, don’t forget to click the grey ☑ under the “0” at the left of this text to accept it, which means “yes, this answer is valid”!
– David Foerster
Feb 17 '17 at 9:10
As you’re a reputation 6 user: if this answers your question, don’t forget to click the grey ☑ under the “0” at the left of this text to accept it, which means “yes, this answer is valid”!
– David Foerster
Feb 17 '17 at 9:10
add a comment |
draft saved
draft discarded
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f814364%2fusb-wireless-netgear-adapter-ubuntu-16-04%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
You can always PM me on ubuntuforums.org. However, let's crack the case right here. What is the result of these terminal commands:
sudo modprobe ndiswrapperand also:dmesg | grep ndisWelcome to askubuntu.– chili555
Aug 20 '16 at 14:34
The terminal didn't return anything to me. Thanks for coming to the rescue. :D
– Shawn Baumbach
Aug 20 '16 at 18:47
1
The terminal didn't return anything to me for "sudo modprobe ndsiwrapper" The first time I ran it during step 10. Now I get "modprobe: FATAL: Module ndsiwrapper not found in directory /lib/modules/4.4.0-34-generic" But I didn't redo all of the steps, do I need to? I edited dmesg grep ndis into the bottom of my main, also ran without redoing the steps. Gonna have to go to work in a few minutes.
– Shawn Baumbach
Aug 20 '16 at 19:12
I would try again:
sudo apt-get install --reinstall ndiswrapperand next:sudo apt-get install ndiswrapper-dkmsand finally:sudo modprobe ndiswrapperAny errors, warnings, etc.?– chili555
Aug 20 '16 at 20:02
Ah, sorry, I forgot I had my other adapter installed (Was trying to get it to work after giving up on this one) I reran dmesg | grep ndis and got a entirely different result. ndis modprbe ndiswrapper didn't return anything. I'll put the dmesg into edit 2) up above.
– Shawn Baumbach
Aug 21 '16 at 2:32