Icons disappear and then system crashes












0















The symptoms are pretty much similar to this question here, but with slight differences.



LSB Version:    core-9.20170808ubuntu1-noarch:printing- 9.20170808ubuntu1-noarch:security-9.20170808ubuntu1-noarch
Distributor ID: Ubuntu
Description: Ubuntu 18.04.2 LTS
Release: 18.04
Codename: bionic


I'm running an Asus computer with 2 os (win 10, ubuntu), but i almost never use windows.
Sometimes, while I'm browsing or working on ubuntu, the computer starts to fail.



First of all, all the icons on the launchbar and dashboard disappear (expect, for some unknown reason, for the Qt Creator icon).
no_icons



In this state, the terminal is no longer working, meaning that any command (sudo,cd,ls,etc.) ends up in an error. The keyboard shortcuts do not work anymore. If I try to lock screen and then reopen it, I lose the right to access.
no_access



After few minutes, the monitor changes into the following screenno_os
and all I can do is hard reset. Alt+Ctrl+F* does not let me change into another command line and Alt+Stamp+K do not reset the os.



Any help? Have you any idea on what could be the cause?










share|improve this question























  • Have you installed a Windows driver that allows read/write access to Linux ext2/3/4 partitions? If so, remove it asap, then do a fsck on your Ubuntu partition, and you should be fine. Also... if you're running from a SSD, have you checked for firmware updates for the SSD?

    – heynnema
    Mar 8 at 21:55













  • I actually almost never used Windows, so whatever program it is installed on it, it is due to classic windows updates @heynnema

    – user49870
    Mar 8 at 22:05











  • Do you know how to fsck your system, or should I give you the steps? Have you checked for a SSD firmware update?

    – heynnema
    Mar 8 at 22:06













  • I already booted from a live usb and ran the e2fsck command on the drive. didn't see anything wrong @heynnema

    – user49870
    Mar 8 at 22:07













  • And did it show errors and resolve them, or just run clean? If errors, did you fsck again?

    – heynnema
    Mar 8 at 22:08
















0















The symptoms are pretty much similar to this question here, but with slight differences.



LSB Version:    core-9.20170808ubuntu1-noarch:printing- 9.20170808ubuntu1-noarch:security-9.20170808ubuntu1-noarch
Distributor ID: Ubuntu
Description: Ubuntu 18.04.2 LTS
Release: 18.04
Codename: bionic


I'm running an Asus computer with 2 os (win 10, ubuntu), but i almost never use windows.
Sometimes, while I'm browsing or working on ubuntu, the computer starts to fail.



First of all, all the icons on the launchbar and dashboard disappear (expect, for some unknown reason, for the Qt Creator icon).
no_icons



In this state, the terminal is no longer working, meaning that any command (sudo,cd,ls,etc.) ends up in an error. The keyboard shortcuts do not work anymore. If I try to lock screen and then reopen it, I lose the right to access.
no_access



After few minutes, the monitor changes into the following screenno_os
and all I can do is hard reset. Alt+Ctrl+F* does not let me change into another command line and Alt+Stamp+K do not reset the os.



Any help? Have you any idea on what could be the cause?










share|improve this question























  • Have you installed a Windows driver that allows read/write access to Linux ext2/3/4 partitions? If so, remove it asap, then do a fsck on your Ubuntu partition, and you should be fine. Also... if you're running from a SSD, have you checked for firmware updates for the SSD?

    – heynnema
    Mar 8 at 21:55













  • I actually almost never used Windows, so whatever program it is installed on it, it is due to classic windows updates @heynnema

    – user49870
    Mar 8 at 22:05











  • Do you know how to fsck your system, or should I give you the steps? Have you checked for a SSD firmware update?

    – heynnema
    Mar 8 at 22:06













  • I already booted from a live usb and ran the e2fsck command on the drive. didn't see anything wrong @heynnema

    – user49870
    Mar 8 at 22:07













  • And did it show errors and resolve them, or just run clean? If errors, did you fsck again?

    – heynnema
    Mar 8 at 22:08














0












0








0








The symptoms are pretty much similar to this question here, but with slight differences.



LSB Version:    core-9.20170808ubuntu1-noarch:printing- 9.20170808ubuntu1-noarch:security-9.20170808ubuntu1-noarch
Distributor ID: Ubuntu
Description: Ubuntu 18.04.2 LTS
Release: 18.04
Codename: bionic


I'm running an Asus computer with 2 os (win 10, ubuntu), but i almost never use windows.
Sometimes, while I'm browsing or working on ubuntu, the computer starts to fail.



First of all, all the icons on the launchbar and dashboard disappear (expect, for some unknown reason, for the Qt Creator icon).
no_icons



In this state, the terminal is no longer working, meaning that any command (sudo,cd,ls,etc.) ends up in an error. The keyboard shortcuts do not work anymore. If I try to lock screen and then reopen it, I lose the right to access.
no_access



After few minutes, the monitor changes into the following screenno_os
and all I can do is hard reset. Alt+Ctrl+F* does not let me change into another command line and Alt+Stamp+K do not reset the os.



Any help? Have you any idea on what could be the cause?










share|improve this question














The symptoms are pretty much similar to this question here, but with slight differences.



LSB Version:    core-9.20170808ubuntu1-noarch:printing- 9.20170808ubuntu1-noarch:security-9.20170808ubuntu1-noarch
Distributor ID: Ubuntu
Description: Ubuntu 18.04.2 LTS
Release: 18.04
Codename: bionic


I'm running an Asus computer with 2 os (win 10, ubuntu), but i almost never use windows.
Sometimes, while I'm browsing or working on ubuntu, the computer starts to fail.



First of all, all the icons on the launchbar and dashboard disappear (expect, for some unknown reason, for the Qt Creator icon).
no_icons



In this state, the terminal is no longer working, meaning that any command (sudo,cd,ls,etc.) ends up in an error. The keyboard shortcuts do not work anymore. If I try to lock screen and then reopen it, I lose the right to access.
no_access



After few minutes, the monitor changes into the following screenno_os
and all I can do is hard reset. Alt+Ctrl+F* does not let me change into another command line and Alt+Stamp+K do not reset the os.



Any help? Have you any idea on what could be the cause?







dual-boot icons crash






share|improve this question













share|improve this question











share|improve this question




share|improve this question










asked Mar 8 at 19:46









user49870user49870

1063




1063













  • Have you installed a Windows driver that allows read/write access to Linux ext2/3/4 partitions? If so, remove it asap, then do a fsck on your Ubuntu partition, and you should be fine. Also... if you're running from a SSD, have you checked for firmware updates for the SSD?

    – heynnema
    Mar 8 at 21:55













  • I actually almost never used Windows, so whatever program it is installed on it, it is due to classic windows updates @heynnema

    – user49870
    Mar 8 at 22:05











  • Do you know how to fsck your system, or should I give you the steps? Have you checked for a SSD firmware update?

    – heynnema
    Mar 8 at 22:06













  • I already booted from a live usb and ran the e2fsck command on the drive. didn't see anything wrong @heynnema

    – user49870
    Mar 8 at 22:07













  • And did it show errors and resolve them, or just run clean? If errors, did you fsck again?

    – heynnema
    Mar 8 at 22:08



















  • Have you installed a Windows driver that allows read/write access to Linux ext2/3/4 partitions? If so, remove it asap, then do a fsck on your Ubuntu partition, and you should be fine. Also... if you're running from a SSD, have you checked for firmware updates for the SSD?

    – heynnema
    Mar 8 at 21:55













  • I actually almost never used Windows, so whatever program it is installed on it, it is due to classic windows updates @heynnema

    – user49870
    Mar 8 at 22:05











  • Do you know how to fsck your system, or should I give you the steps? Have you checked for a SSD firmware update?

    – heynnema
    Mar 8 at 22:06













  • I already booted from a live usb and ran the e2fsck command on the drive. didn't see anything wrong @heynnema

    – user49870
    Mar 8 at 22:07













  • And did it show errors and resolve them, or just run clean? If errors, did you fsck again?

    – heynnema
    Mar 8 at 22:08

















Have you installed a Windows driver that allows read/write access to Linux ext2/3/4 partitions? If so, remove it asap, then do a fsck on your Ubuntu partition, and you should be fine. Also... if you're running from a SSD, have you checked for firmware updates for the SSD?

– heynnema
Mar 8 at 21:55







Have you installed a Windows driver that allows read/write access to Linux ext2/3/4 partitions? If so, remove it asap, then do a fsck on your Ubuntu partition, and you should be fine. Also... if you're running from a SSD, have you checked for firmware updates for the SSD?

– heynnema
Mar 8 at 21:55















I actually almost never used Windows, so whatever program it is installed on it, it is due to classic windows updates @heynnema

– user49870
Mar 8 at 22:05





I actually almost never used Windows, so whatever program it is installed on it, it is due to classic windows updates @heynnema

– user49870
Mar 8 at 22:05













Do you know how to fsck your system, or should I give you the steps? Have you checked for a SSD firmware update?

– heynnema
Mar 8 at 22:06







Do you know how to fsck your system, or should I give you the steps? Have you checked for a SSD firmware update?

– heynnema
Mar 8 at 22:06















I already booted from a live usb and ran the e2fsck command on the drive. didn't see anything wrong @heynnema

– user49870
Mar 8 at 22:07







I already booted from a live usb and ran the e2fsck command on the drive. didn't see anything wrong @heynnema

– user49870
Mar 8 at 22:07















And did it show errors and resolve them, or just run clean? If errors, did you fsck again?

– heynnema
Mar 8 at 22:08





And did it show errors and resolve them, or just run clean? If errors, did you fsck again?

– heynnema
Mar 8 at 22:08










1 Answer
1






active

oldest

votes


















0














The "read-only file system" indicates that Ubuntu had a problem with the disk, and unmounted it and then remounted in read-only mode, as described in https://askubuntu.com/a/197468/283721



You should boot a live USB and run fsck on the disk in question, and you might also check the disk connections, and test the hard disk for errors, as described in How can I check the SMART status of a SSD or HDD on current versions of Ubuntu 14.04 through 18.10?






share|improve this answer


























  • already did a e2fsck check on the disk and it seemed to be fine to me

    – user49870
    Mar 8 at 21:58











  • I also just ran a SMART check and it seems also to be ok

    – user49870
    Mar 8 at 22:06











  • @user49870 The smart check would indicate that there is no apparent problem with the HDD - Did you use the -f option for your fsck? It may be that the super block reports the disk clean, even if it is not.

    – Charles Green
    2 days ago











Your Answer








StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});


}
});














draft saved

draft discarded


















StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1124126%2ficons-disappear-and-then-system-crashes%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown

























1 Answer
1






active

oldest

votes








1 Answer
1






active

oldest

votes









active

oldest

votes






active

oldest

votes









0














The "read-only file system" indicates that Ubuntu had a problem with the disk, and unmounted it and then remounted in read-only mode, as described in https://askubuntu.com/a/197468/283721



You should boot a live USB and run fsck on the disk in question, and you might also check the disk connections, and test the hard disk for errors, as described in How can I check the SMART status of a SSD or HDD on current versions of Ubuntu 14.04 through 18.10?






share|improve this answer


























  • already did a e2fsck check on the disk and it seemed to be fine to me

    – user49870
    Mar 8 at 21:58











  • I also just ran a SMART check and it seems also to be ok

    – user49870
    Mar 8 at 22:06











  • @user49870 The smart check would indicate that there is no apparent problem with the HDD - Did you use the -f option for your fsck? It may be that the super block reports the disk clean, even if it is not.

    – Charles Green
    2 days ago
















0














The "read-only file system" indicates that Ubuntu had a problem with the disk, and unmounted it and then remounted in read-only mode, as described in https://askubuntu.com/a/197468/283721



You should boot a live USB and run fsck on the disk in question, and you might also check the disk connections, and test the hard disk for errors, as described in How can I check the SMART status of a SSD or HDD on current versions of Ubuntu 14.04 through 18.10?






share|improve this answer


























  • already did a e2fsck check on the disk and it seemed to be fine to me

    – user49870
    Mar 8 at 21:58











  • I also just ran a SMART check and it seems also to be ok

    – user49870
    Mar 8 at 22:06











  • @user49870 The smart check would indicate that there is no apparent problem with the HDD - Did you use the -f option for your fsck? It may be that the super block reports the disk clean, even if it is not.

    – Charles Green
    2 days ago














0












0








0







The "read-only file system" indicates that Ubuntu had a problem with the disk, and unmounted it and then remounted in read-only mode, as described in https://askubuntu.com/a/197468/283721



You should boot a live USB and run fsck on the disk in question, and you might also check the disk connections, and test the hard disk for errors, as described in How can I check the SMART status of a SSD or HDD on current versions of Ubuntu 14.04 through 18.10?






share|improve this answer















The "read-only file system" indicates that Ubuntu had a problem with the disk, and unmounted it and then remounted in read-only mode, as described in https://askubuntu.com/a/197468/283721



You should boot a live USB and run fsck on the disk in question, and you might also check the disk connections, and test the hard disk for errors, as described in How can I check the SMART status of a SSD or HDD on current versions of Ubuntu 14.04 through 18.10?







share|improve this answer














share|improve this answer



share|improve this answer








edited Mar 8 at 21:14

























answered Mar 8 at 20:53









Charles GreenCharles Green

14k73859




14k73859













  • already did a e2fsck check on the disk and it seemed to be fine to me

    – user49870
    Mar 8 at 21:58











  • I also just ran a SMART check and it seems also to be ok

    – user49870
    Mar 8 at 22:06











  • @user49870 The smart check would indicate that there is no apparent problem with the HDD - Did you use the -f option for your fsck? It may be that the super block reports the disk clean, even if it is not.

    – Charles Green
    2 days ago



















  • already did a e2fsck check on the disk and it seemed to be fine to me

    – user49870
    Mar 8 at 21:58











  • I also just ran a SMART check and it seems also to be ok

    – user49870
    Mar 8 at 22:06











  • @user49870 The smart check would indicate that there is no apparent problem with the HDD - Did you use the -f option for your fsck? It may be that the super block reports the disk clean, even if it is not.

    – Charles Green
    2 days ago

















already did a e2fsck check on the disk and it seemed to be fine to me

– user49870
Mar 8 at 21:58





already did a e2fsck check on the disk and it seemed to be fine to me

– user49870
Mar 8 at 21:58













I also just ran a SMART check and it seems also to be ok

– user49870
Mar 8 at 22:06





I also just ran a SMART check and it seems also to be ok

– user49870
Mar 8 at 22:06













@user49870 The smart check would indicate that there is no apparent problem with the HDD - Did you use the -f option for your fsck? It may be that the super block reports the disk clean, even if it is not.

– Charles Green
2 days ago





@user49870 The smart check would indicate that there is no apparent problem with the HDD - Did you use the -f option for your fsck? It may be that the super block reports the disk clean, even if it is not.

– Charles Green
2 days ago


















draft saved

draft discarded




















































Thanks for contributing an answer to Ask Ubuntu!


  • Please be sure to answer the question. Provide details and share your research!

But avoid



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


To learn more, see our tips on writing great answers.




draft saved


draft discarded














StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1124126%2ficons-disappear-and-then-system-crashes%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown







Popular posts from this blog

數位音樂下載

When can things happen in Etherscan, such as the picture below?

格利澤436b