What are Radio-location Services in the 1.9-2.0 MHz range?
$begingroup$
I'm currently studying for the General Exam and in looking at charts of the new frequency privileges have run across a restriction I would like to have further defined. In the 160 meter band the books all say "1.90 MHz thru 2.0 MHz should be treated as a secondary allocation as we are required to avoid interfering with Radio-location Services in that range."
What are Radio-location Services at 1.90-2.0 MHz?
united-states hf frequency 160m-band
$endgroup$
add a comment |
$begingroup$
I'm currently studying for the General Exam and in looking at charts of the new frequency privileges have run across a restriction I would like to have further defined. In the 160 meter band the books all say "1.90 MHz thru 2.0 MHz should be treated as a secondary allocation as we are required to avoid interfering with Radio-location Services in that range."
What are Radio-location Services at 1.90-2.0 MHz?
united-states hf frequency 160m-band
$endgroup$
add a comment |
$begingroup$
I'm currently studying for the General Exam and in looking at charts of the new frequency privileges have run across a restriction I would like to have further defined. In the 160 meter band the books all say "1.90 MHz thru 2.0 MHz should be treated as a secondary allocation as we are required to avoid interfering with Radio-location Services in that range."
What are Radio-location Services at 1.90-2.0 MHz?
united-states hf frequency 160m-band
$endgroup$
I'm currently studying for the General Exam and in looking at charts of the new frequency privileges have run across a restriction I would like to have further defined. In the 160 meter band the books all say "1.90 MHz thru 2.0 MHz should be treated as a secondary allocation as we are required to avoid interfering with Radio-location Services in that range."
What are Radio-location Services at 1.90-2.0 MHz?
united-states hf frequency 160m-band
united-states hf frequency 160m-band
edited 9 hours ago
Kevin Reid AG6YO♦
16.2k33170
16.2k33170
asked 9 hours ago
Dave GDave G
806
806
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
$begingroup$
I wish you well with the general test!
The radiolocation services in question are defined in CFR 47 §2.106:
NG92 The band 1900-2000 kHz is also allocated on a primary basis to the maritime mobile service in Regions 2 and 3 and to the radiolocation service in Region 2, and on a secondary basis to the radiolocation service in Region 3. The use of these allocations is restricted to radio buoy operations on the open sea and the Great Lakes. Stations in the amateur, maritime mobile, and radiolocation services in Region 2 shall be protected from harmful interference only to the extent that the offending station does not operate in compliance with the technical rules applicable to the service in which it operates.
$endgroup$
2
$begingroup$
Fishnet buoy beacons are a nuisance just above 1.8 MHz, FWIW.
$endgroup$
– Mike Waters♦
8 hours ago
1
$begingroup$
How would one ever know they are interfering with a buoy's transmissions? Do we just avoid transmitting altogether on 1.9 - 2.0 MHz?
$endgroup$
– Dave G
6 hours ago
3
$begingroup$
@DaveG The idea is you listen to your transmit frequency. If you hear a buoy, you change frequencies, If not, feel free to keep using the frequency until such time that you do hear one.
$endgroup$
– Glenn W9IQ
6 hours ago
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
return StackExchange.using("mathjaxEditing", function () {
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["$", "$"], ["\\(","\\)"]]);
});
});
}, "mathjax-editing");
StackExchange.ifUsing("editor", function () {
return StackExchange.using("schematics", function () {
StackExchange.schematics.init();
});
}, "cicuitlab");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "520"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fham.stackexchange.com%2fquestions%2f12972%2fwhat-are-radio-location-services-in-the-1-9-2-0-mhz-range%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
I wish you well with the general test!
The radiolocation services in question are defined in CFR 47 §2.106:
NG92 The band 1900-2000 kHz is also allocated on a primary basis to the maritime mobile service in Regions 2 and 3 and to the radiolocation service in Region 2, and on a secondary basis to the radiolocation service in Region 3. The use of these allocations is restricted to radio buoy operations on the open sea and the Great Lakes. Stations in the amateur, maritime mobile, and radiolocation services in Region 2 shall be protected from harmful interference only to the extent that the offending station does not operate in compliance with the technical rules applicable to the service in which it operates.
$endgroup$
2
$begingroup$
Fishnet buoy beacons are a nuisance just above 1.8 MHz, FWIW.
$endgroup$
– Mike Waters♦
8 hours ago
1
$begingroup$
How would one ever know they are interfering with a buoy's transmissions? Do we just avoid transmitting altogether on 1.9 - 2.0 MHz?
$endgroup$
– Dave G
6 hours ago
3
$begingroup$
@DaveG The idea is you listen to your transmit frequency. If you hear a buoy, you change frequencies, If not, feel free to keep using the frequency until such time that you do hear one.
$endgroup$
– Glenn W9IQ
6 hours ago
add a comment |
$begingroup$
I wish you well with the general test!
The radiolocation services in question are defined in CFR 47 §2.106:
NG92 The band 1900-2000 kHz is also allocated on a primary basis to the maritime mobile service in Regions 2 and 3 and to the radiolocation service in Region 2, and on a secondary basis to the radiolocation service in Region 3. The use of these allocations is restricted to radio buoy operations on the open sea and the Great Lakes. Stations in the amateur, maritime mobile, and radiolocation services in Region 2 shall be protected from harmful interference only to the extent that the offending station does not operate in compliance with the technical rules applicable to the service in which it operates.
$endgroup$
2
$begingroup$
Fishnet buoy beacons are a nuisance just above 1.8 MHz, FWIW.
$endgroup$
– Mike Waters♦
8 hours ago
1
$begingroup$
How would one ever know they are interfering with a buoy's transmissions? Do we just avoid transmitting altogether on 1.9 - 2.0 MHz?
$endgroup$
– Dave G
6 hours ago
3
$begingroup$
@DaveG The idea is you listen to your transmit frequency. If you hear a buoy, you change frequencies, If not, feel free to keep using the frequency until such time that you do hear one.
$endgroup$
– Glenn W9IQ
6 hours ago
add a comment |
$begingroup$
I wish you well with the general test!
The radiolocation services in question are defined in CFR 47 §2.106:
NG92 The band 1900-2000 kHz is also allocated on a primary basis to the maritime mobile service in Regions 2 and 3 and to the radiolocation service in Region 2, and on a secondary basis to the radiolocation service in Region 3. The use of these allocations is restricted to radio buoy operations on the open sea and the Great Lakes. Stations in the amateur, maritime mobile, and radiolocation services in Region 2 shall be protected from harmful interference only to the extent that the offending station does not operate in compliance with the technical rules applicable to the service in which it operates.
$endgroup$
I wish you well with the general test!
The radiolocation services in question are defined in CFR 47 §2.106:
NG92 The band 1900-2000 kHz is also allocated on a primary basis to the maritime mobile service in Regions 2 and 3 and to the radiolocation service in Region 2, and on a secondary basis to the radiolocation service in Region 3. The use of these allocations is restricted to radio buoy operations on the open sea and the Great Lakes. Stations in the amateur, maritime mobile, and radiolocation services in Region 2 shall be protected from harmful interference only to the extent that the offending station does not operate in compliance with the technical rules applicable to the service in which it operates.
edited 8 hours ago
answered 9 hours ago
Glenn W9IQGlenn W9IQ
16.2k11146
16.2k11146
2
$begingroup$
Fishnet buoy beacons are a nuisance just above 1.8 MHz, FWIW.
$endgroup$
– Mike Waters♦
8 hours ago
1
$begingroup$
How would one ever know they are interfering with a buoy's transmissions? Do we just avoid transmitting altogether on 1.9 - 2.0 MHz?
$endgroup$
– Dave G
6 hours ago
3
$begingroup$
@DaveG The idea is you listen to your transmit frequency. If you hear a buoy, you change frequencies, If not, feel free to keep using the frequency until such time that you do hear one.
$endgroup$
– Glenn W9IQ
6 hours ago
add a comment |
2
$begingroup$
Fishnet buoy beacons are a nuisance just above 1.8 MHz, FWIW.
$endgroup$
– Mike Waters♦
8 hours ago
1
$begingroup$
How would one ever know they are interfering with a buoy's transmissions? Do we just avoid transmitting altogether on 1.9 - 2.0 MHz?
$endgroup$
– Dave G
6 hours ago
3
$begingroup$
@DaveG The idea is you listen to your transmit frequency. If you hear a buoy, you change frequencies, If not, feel free to keep using the frequency until such time that you do hear one.
$endgroup$
– Glenn W9IQ
6 hours ago
2
2
$begingroup$
Fishnet buoy beacons are a nuisance just above 1.8 MHz, FWIW.
$endgroup$
– Mike Waters♦
8 hours ago
$begingroup$
Fishnet buoy beacons are a nuisance just above 1.8 MHz, FWIW.
$endgroup$
– Mike Waters♦
8 hours ago
1
1
$begingroup$
How would one ever know they are interfering with a buoy's transmissions? Do we just avoid transmitting altogether on 1.9 - 2.0 MHz?
$endgroup$
– Dave G
6 hours ago
$begingroup$
How would one ever know they are interfering with a buoy's transmissions? Do we just avoid transmitting altogether on 1.9 - 2.0 MHz?
$endgroup$
– Dave G
6 hours ago
3
3
$begingroup$
@DaveG The idea is you listen to your transmit frequency. If you hear a buoy, you change frequencies, If not, feel free to keep using the frequency until such time that you do hear one.
$endgroup$
– Glenn W9IQ
6 hours ago
$begingroup$
@DaveG The idea is you listen to your transmit frequency. If you hear a buoy, you change frequencies, If not, feel free to keep using the frequency until such time that you do hear one.
$endgroup$
– Glenn W9IQ
6 hours ago
add a comment |
Thanks for contributing an answer to Amateur Radio Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fham.stackexchange.com%2fquestions%2f12972%2fwhat-are-radio-location-services-in-the-1-9-2-0-mhz-range%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown