Cfxtrjtrk

Ubuntu 13.04 installation disk has an option to install Ubuntu encrypted using LUKS. However, there is no option to perform an encrypted installation along-side existing partitions for a dual-boot scenario.

How can I install Ubuntu encrypted alongside another partition from the live disk?

First of all, if you want to install Ubuntu encrypted on a hard disk, replacing any existing partitions and operating systems, you can do this directly from the graphical installer. This manual process is only required for dual-booting.

This answer has been tested with Ubuntu 13.04.

1. Boot from an Ubuntu live DVD or USB stick, and select "Try Ubuntu".



2. 
   

   Create two partitions using GParted included in the live disk. The first partition should be unformatted and should be large enough for root and swap, in my example, this is /dev/sda3. The second partition should be several hundred megabytes big and formatted in ext2 or ext3, it will be unencrypted and mounted to /boot (in my example this is /dev/sda4).

   
   
   

   In this screenshot, I have an existing unencrypted Ubuntu installation in two partitions: /dev/sda1 and /dev/sda5, highlight in the circle to the left. I have created an unformatted partition in /dev/sda3 and an ext3 partition in /dev/sda4, intended for the encrypted Ubuntu installation, higlighted in the circle to the right:

   
   
   

   

   
   


3. 
   

   Create a LUKS container using these commands. Replace /dev/sda3 with the unformatted partition created earlier, and cryptcherries with a name of your choice.

   
   
   

   sudo cryptsetup luksFormat /dev/sda3
   
   sudo cryptsetup luksOpen /dev/sda3 cryptcherries
   
   

   
   


4. 
   

   Warning: You'll notice that the luksFormat step completed very quickly, because it doesn't securely erase the underlying block device. Unless you're just experimenting and don't care about security against various types of forensic attack, it is critical to properly initialize the new LUKS container before creating filesystems in it. Writing zeros to the mapped container will cause strong random data to be written to the underlying block device. This can take a while, so it's best to use the pv command to monitor the progress:

   
   
   

   sudo add-apt-repository "deb http://archive.ubuntu.com/ubuntu $(lsb_release -sc) universe"
   
   sudo apt-get update
   
   sudo apt-get install -y pv
   
   sudo sh -c 'exec pv -tprebB 16m /dev/zero >"$1"' _ /dev/mapper/cryptcherries
   
   

   
   
   

   or, if you're doing an offline install and can't easily get pv:

   
   
   

   sudo dd if=/dev/zero of=/dev/mapper/cryptcherries bs=16M
   
   

   
   


5. 
   

   Inside the mounted LUKS container, create an LVM physical volume, a volume group and two logical volumes. The first logical volume will be mounted at /, and the second one will be used as swap. vgcherries is the name of the volume group, and lvcherriesroot and lvcherriesswap are the names of the logical volumes, you can choose your own.

   
   
   

   sudo pvcreate /dev/mapper/cryptcherries
   
   sudo vgcreate vgcherries /dev/mapper/cryptcherries
   
   sudo lvcreate -n lvcherriesroot -L 7.5g vgcherries
   
   sudo lvcreate -n lvcherriesswap -L 1g vgcherries
   
   

   
   


6. 
   

   Create filesystems for the two logical volumes: (You can also do this step directly from the installer.)

   
   
   

   sudo mkfs.ext4 /dev/mapper/vgcherries-lvcherriesroot
   
   sudo mkswap /dev/mapper/vgcherries-lvcherriesswap
   
   

   
   



7. Without rebooting, install Ubuntu using the graphical installer (shortcut is on the desktop in Xubuntu 18.04), choosing manual partitioning. Assign / to /dev/mapper/vgcherries-lvcherriesroot and /boot to the unencrypted partition created in step 2 (in this example,/dev/sda4).




8. Once the graphical installer is finished, select "continue testing" and open a terminal.



9. 
   

   Find the UUID of the LUKS partitions (/dev/sda3 in this case), you will need it later:

   
   
   

   $ sudo blkid /dev/sda3
   
   /dev/sda3: UUID="8b80b3a7-6a33-4db3-87ce-7f126545c74af" TYPE="crypto_LUKS"
   
   

   
   


10. 
    

    Mount the appropriate devices to the appropriate locations in /mnt, and chroot into it:

    
    
    

    sudo mount /dev/mapper/vgcherries-lvcherriesroot /mnt
    
    sudo mount /dev/sda4 /mnt/boot
    
    sudo mount --bind /dev /mnt/dev
    
    sudo chroot /mnt
    
    > mount -t proc proc /proc
    
    > mount -t sysfs sys /sys
    
    > mount -t devpts devpts /dev/pts
    
    

    
    


11. 
    

    Create a file named /etc/crypttab in the chrooted environment to contain this line, replacing the UUID value with the UUID of the LUKS partition, and vgcherries with the name of the volume group:

    
    
    

    # <target name> <source device> <key file> <options>
    
    cryptcherries UUID=8b80b3a7-6a33-4db3-87ce-7f126545c74af none luks,retry=1,lvm=vgcherries
    
    

    
    


12. 
    

    Run the following command in the chrooted environment:

    
    
    

    update-initramfs -k all -c
    
    

    
    



13. Reboot and boot into the encrypted Ubuntu. You should be prompted for a password.



14. 
    

    Check that you're using the encrypted partition for / by running mount:

    
    
    

    $ mount
    
    /dev/mapper/vgcherries-lvcherriesroot on / type ext4 (rw,errors=remount-ro)
    
    /dev/sda4 on /boot type ext3 (rw)
    
    # rest of output cut for brevity
    
    

    
    


15. 
    

    Check that you're using the encrypted swap partition (not any unencrypted swap partitions from any other installations) by running this command:

    
    
    

    $ swapon -s
    
    Filename                              Type      Size   Used Priority
    
    /dev/mapper/vgcherries-lvcherriesswap partition 630780 0    -1
    
    

    
    



16. Check that you can boot into recovery mode, you don't want to find out later during an emergency that recovery mode doesn't work :)




17. Install any updates, which are likely to rebuild the ramdisk and update the grub configuration. Reboot and test both normal mode and recovery mode.

Here are some instructions for what I just did with a dell inspiron 5000.

I tried the selected answer but it didn't work for me after doing a dist-upgrade and update-grub (to add windows to my grubconf).

Its possible to dual boot install ubuntu 18.10 with windows 10, and you don't have to do all the commandline things or use the Ubuntu LiveUSB mode.

From Windows

• in the start bar type disk partition and select the first option (opening the disk partition manager from settings)




• shrink your primary partition to your desired ubuntu size (I just used the default splitting my 500gb drive into a 240gb Windows OS and 240gb unallocated)

From BIOS

• disable secure boot (if you have bitlocker you will need to renable it to securely boot into windows each time) - this is fine for me since Ubu is my primary OS, just use windoze for gaming.

Finally - Boot into the 18.10 Installer USB

• Hit enter on the default install ubuntu option




• When you get to the screen that says "erase entire disk" and has some checkboxes, click the "Something else" (manual partitioning) option. If you hit ERASE ENTIRE DISK you are replacing your windows install, don't do that!

Once the disk partition manager loads your disk, you'll have a large unallocated space

Click that and hit the add button to create partitions.

- First, create a 500MB /boot partition

- Second, with the rest of the space make a encrypted volume

--- This will create a single LV partition

------ Modify it to be the selected root “/” partition

- Then the rest of the install process will work like usual. relax.

Once you’ve booted in the first time, do an apt-get update and dist-upgrade, reboot again.

A 2gb swapfile will be created automatically, if you want an 8GB one instead read this
https://askubuntu.com/a/927870