NASA's RS-25 Engines
$begingroup$
I am developing a FSX-based space flight simulator FSX SpacePort. I've been trying to get the detailed specs on NASA's RS-25 engine, namely, what were the ramp-up times for this engine? As in, how long did it take from ignition to full thrust?
Thanks!
nasa engines sls ssme
New contributor
$endgroup$
add a comment |
$begingroup$
I am developing a FSX-based space flight simulator FSX SpacePort. I've been trying to get the detailed specs on NASA's RS-25 engine, namely, what were the ramp-up times for this engine? As in, how long did it take from ignition to full thrust?
Thanks!
nasa engines sls ssme
New contributor
$endgroup$
add a comment |
$begingroup$
I am developing a FSX-based space flight simulator FSX SpacePort. I've been trying to get the detailed specs on NASA's RS-25 engine, namely, what were the ramp-up times for this engine? As in, how long did it take from ignition to full thrust?
Thanks!
nasa engines sls ssme
New contributor
$endgroup$
I am developing a FSX-based space flight simulator FSX SpacePort. I've been trying to get the detailed specs on NASA's RS-25 engine, namely, what were the ramp-up times for this engine? As in, how long did it take from ignition to full thrust?
Thanks!
nasa engines sls ssme
nasa engines sls ssme
New contributor
New contributor
edited 3 hours ago
Organic Marble
58.2k3159249
58.2k3159249
New contributor
asked 5 hours ago
Mitch99Mitch99
254
254
New contributor
New contributor
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
$begingroup$
A good assumption is that the startup sequence is very similar to the SSME. Here is some SSME startup data showing the time you asked about from the Rocketdyne Pocket Data Book. Eventually the SLS will be using RS-25Es which are somewhat different from the SSME, but my guess is that the start sequence won't change much if at all.
The hashed field is test experience, the solid lines are the ICD requirements.
$endgroup$
$begingroup$
Awesome! Exactly what I was looking for! Thank you!
$endgroup$
– Mitch99
2 hours ago
$begingroup$
@Mitch99 Since you're new to the site: If this answer is what you were looking for, please mark it as correct by clicking the gray checkmark beside it. And upvote if you have a mind to.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
Got it, thanks!!
$endgroup$
– Mitch99
2 hours ago
$begingroup$
So - since it takes ~4 seconds to get them to 100% thrust, do they then ignite them at T -4:00 seconds, and they count T -0:00 the time all of them are roughly at 100%, the SRBs get lit, and it's a "mission start"?
$endgroup$
– Mitch99
1 hour ago
$begingroup$
I only know about shuttle, but there the start command was send at ~T-5 seconds, which gave time for the SSMEs to light, the "twang" to settle, and then the SRBs lit at, yes, T-0. SLS won't have the "twang" to deal with because its engines are axially mounted.
$endgroup$
– Organic Marble
1 hour ago
|
show 2 more comments
Your Answer
StackExchange.ifUsing("editor", function () {
return StackExchange.using("mathjaxEditing", function () {
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["$", "$"], ["\\(","\\)"]]);
});
});
}, "mathjax-editing");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "508"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Mitch99 is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fspace.stackexchange.com%2fquestions%2f34726%2fnasas-rs-25-engines%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
A good assumption is that the startup sequence is very similar to the SSME. Here is some SSME startup data showing the time you asked about from the Rocketdyne Pocket Data Book. Eventually the SLS will be using RS-25Es which are somewhat different from the SSME, but my guess is that the start sequence won't change much if at all.
The hashed field is test experience, the solid lines are the ICD requirements.
$endgroup$
$begingroup$
Awesome! Exactly what I was looking for! Thank you!
$endgroup$
– Mitch99
2 hours ago
$begingroup$
@Mitch99 Since you're new to the site: If this answer is what you were looking for, please mark it as correct by clicking the gray checkmark beside it. And upvote if you have a mind to.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
Got it, thanks!!
$endgroup$
– Mitch99
2 hours ago
$begingroup$
So - since it takes ~4 seconds to get them to 100% thrust, do they then ignite them at T -4:00 seconds, and they count T -0:00 the time all of them are roughly at 100%, the SRBs get lit, and it's a "mission start"?
$endgroup$
– Mitch99
1 hour ago
$begingroup$
I only know about shuttle, but there the start command was send at ~T-5 seconds, which gave time for the SSMEs to light, the "twang" to settle, and then the SRBs lit at, yes, T-0. SLS won't have the "twang" to deal with because its engines are axially mounted.
$endgroup$
– Organic Marble
1 hour ago
|
show 2 more comments
$begingroup$
A good assumption is that the startup sequence is very similar to the SSME. Here is some SSME startup data showing the time you asked about from the Rocketdyne Pocket Data Book. Eventually the SLS will be using RS-25Es which are somewhat different from the SSME, but my guess is that the start sequence won't change much if at all.
The hashed field is test experience, the solid lines are the ICD requirements.
$endgroup$
$begingroup$
Awesome! Exactly what I was looking for! Thank you!
$endgroup$
– Mitch99
2 hours ago
$begingroup$
@Mitch99 Since you're new to the site: If this answer is what you were looking for, please mark it as correct by clicking the gray checkmark beside it. And upvote if you have a mind to.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
Got it, thanks!!
$endgroup$
– Mitch99
2 hours ago
$begingroup$
So - since it takes ~4 seconds to get them to 100% thrust, do they then ignite them at T -4:00 seconds, and they count T -0:00 the time all of them are roughly at 100%, the SRBs get lit, and it's a "mission start"?
$endgroup$
– Mitch99
1 hour ago
$begingroup$
I only know about shuttle, but there the start command was send at ~T-5 seconds, which gave time for the SSMEs to light, the "twang" to settle, and then the SRBs lit at, yes, T-0. SLS won't have the "twang" to deal with because its engines are axially mounted.
$endgroup$
– Organic Marble
1 hour ago
|
show 2 more comments
$begingroup$
A good assumption is that the startup sequence is very similar to the SSME. Here is some SSME startup data showing the time you asked about from the Rocketdyne Pocket Data Book. Eventually the SLS will be using RS-25Es which are somewhat different from the SSME, but my guess is that the start sequence won't change much if at all.
The hashed field is test experience, the solid lines are the ICD requirements.
$endgroup$
A good assumption is that the startup sequence is very similar to the SSME. Here is some SSME startup data showing the time you asked about from the Rocketdyne Pocket Data Book. Eventually the SLS will be using RS-25Es which are somewhat different from the SSME, but my guess is that the start sequence won't change much if at all.
The hashed field is test experience, the solid lines are the ICD requirements.
edited 3 hours ago
answered 3 hours ago
Organic MarbleOrganic Marble
58.2k3159249
58.2k3159249
$begingroup$
Awesome! Exactly what I was looking for! Thank you!
$endgroup$
– Mitch99
2 hours ago
$begingroup$
@Mitch99 Since you're new to the site: If this answer is what you were looking for, please mark it as correct by clicking the gray checkmark beside it. And upvote if you have a mind to.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
Got it, thanks!!
$endgroup$
– Mitch99
2 hours ago
$begingroup$
So - since it takes ~4 seconds to get them to 100% thrust, do they then ignite them at T -4:00 seconds, and they count T -0:00 the time all of them are roughly at 100%, the SRBs get lit, and it's a "mission start"?
$endgroup$
– Mitch99
1 hour ago
$begingroup$
I only know about shuttle, but there the start command was send at ~T-5 seconds, which gave time for the SSMEs to light, the "twang" to settle, and then the SRBs lit at, yes, T-0. SLS won't have the "twang" to deal with because its engines are axially mounted.
$endgroup$
– Organic Marble
1 hour ago
|
show 2 more comments
$begingroup$
Awesome! Exactly what I was looking for! Thank you!
$endgroup$
– Mitch99
2 hours ago
$begingroup$
@Mitch99 Since you're new to the site: If this answer is what you were looking for, please mark it as correct by clicking the gray checkmark beside it. And upvote if you have a mind to.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
Got it, thanks!!
$endgroup$
– Mitch99
2 hours ago
$begingroup$
So - since it takes ~4 seconds to get them to 100% thrust, do they then ignite them at T -4:00 seconds, and they count T -0:00 the time all of them are roughly at 100%, the SRBs get lit, and it's a "mission start"?
$endgroup$
– Mitch99
1 hour ago
$begingroup$
I only know about shuttle, but there the start command was send at ~T-5 seconds, which gave time for the SSMEs to light, the "twang" to settle, and then the SRBs lit at, yes, T-0. SLS won't have the "twang" to deal with because its engines are axially mounted.
$endgroup$
– Organic Marble
1 hour ago
$begingroup$
Awesome! Exactly what I was looking for! Thank you!
$endgroup$
– Mitch99
2 hours ago
$begingroup$
Awesome! Exactly what I was looking for! Thank you!
$endgroup$
– Mitch99
2 hours ago
$begingroup$
@Mitch99 Since you're new to the site: If this answer is what you were looking for, please mark it as correct by clicking the gray checkmark beside it. And upvote if you have a mind to.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
@Mitch99 Since you're new to the site: If this answer is what you were looking for, please mark it as correct by clicking the gray checkmark beside it. And upvote if you have a mind to.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
Got it, thanks!!
$endgroup$
– Mitch99
2 hours ago
$begingroup$
Got it, thanks!!
$endgroup$
– Mitch99
2 hours ago
$begingroup$
So - since it takes ~4 seconds to get them to 100% thrust, do they then ignite them at T -4:00 seconds, and they count T -0:00 the time all of them are roughly at 100%, the SRBs get lit, and it's a "mission start"?
$endgroup$
– Mitch99
1 hour ago
$begingroup$
So - since it takes ~4 seconds to get them to 100% thrust, do they then ignite them at T -4:00 seconds, and they count T -0:00 the time all of them are roughly at 100%, the SRBs get lit, and it's a "mission start"?
$endgroup$
– Mitch99
1 hour ago
$begingroup$
I only know about shuttle, but there the start command was send at ~T-5 seconds, which gave time for the SSMEs to light, the "twang" to settle, and then the SRBs lit at, yes, T-0. SLS won't have the "twang" to deal with because its engines are axially mounted.
$endgroup$
– Organic Marble
1 hour ago
$begingroup$
I only know about shuttle, but there the start command was send at ~T-5 seconds, which gave time for the SSMEs to light, the "twang" to settle, and then the SRBs lit at, yes, T-0. SLS won't have the "twang" to deal with because its engines are axially mounted.
$endgroup$
– Organic Marble
1 hour ago
|
show 2 more comments
Mitch99 is a new contributor. Be nice, and check out our Code of Conduct.
Mitch99 is a new contributor. Be nice, and check out our Code of Conduct.
Mitch99 is a new contributor. Be nice, and check out our Code of Conduct.
Mitch99 is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Space Exploration Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fspace.stackexchange.com%2fquestions%2f34726%2fnasas-rs-25-engines%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown