Is it possible to turn off a specific USB port so it doesn't accept any device?












10















I have a lot of ports on my computer. I would like to turn off one of them, so when I connect my phone to that port, it only charges. I do want my phone to work with my computer in some occasions though, so I hope other ports are not affected.



I would just like to know how possible this is.










share|improve this question























  • Possible.. But some hacks are needed to do this..

    – Yuvaraj
    Mar 9 '16 at 4:45






  • 1





    Hardware solution: Buy a male to female USB plug and cut/isolate/remove the center lines.

    – Helio
    Mar 18 '16 at 10:45













  • @Helio Then why do not I just buy a USB power station...?

    – bfrguci
    Mar 18 '16 at 16:39
















10















I have a lot of ports on my computer. I would like to turn off one of them, so when I connect my phone to that port, it only charges. I do want my phone to work with my computer in some occasions though, so I hope other ports are not affected.



I would just like to know how possible this is.










share|improve this question























  • Possible.. But some hacks are needed to do this..

    – Yuvaraj
    Mar 9 '16 at 4:45






  • 1





    Hardware solution: Buy a male to female USB plug and cut/isolate/remove the center lines.

    – Helio
    Mar 18 '16 at 10:45













  • @Helio Then why do not I just buy a USB power station...?

    – bfrguci
    Mar 18 '16 at 16:39














10












10








10


2






I have a lot of ports on my computer. I would like to turn off one of them, so when I connect my phone to that port, it only charges. I do want my phone to work with my computer in some occasions though, so I hope other ports are not affected.



I would just like to know how possible this is.










share|improve this question














I have a lot of ports on my computer. I would like to turn off one of them, so when I connect my phone to that port, it only charges. I do want my phone to work with my computer in some occasions though, so I hope other ports are not affected.



I would just like to know how possible this is.







usb






share|improve this question













share|improve this question











share|improve this question




share|improve this question










asked Mar 3 '16 at 20:11









bfrgucibfrguci

3481212




3481212













  • Possible.. But some hacks are needed to do this..

    – Yuvaraj
    Mar 9 '16 at 4:45






  • 1





    Hardware solution: Buy a male to female USB plug and cut/isolate/remove the center lines.

    – Helio
    Mar 18 '16 at 10:45













  • @Helio Then why do not I just buy a USB power station...?

    – bfrguci
    Mar 18 '16 at 16:39



















  • Possible.. But some hacks are needed to do this..

    – Yuvaraj
    Mar 9 '16 at 4:45






  • 1





    Hardware solution: Buy a male to female USB plug and cut/isolate/remove the center lines.

    – Helio
    Mar 18 '16 at 10:45













  • @Helio Then why do not I just buy a USB power station...?

    – bfrguci
    Mar 18 '16 at 16:39

















Possible.. But some hacks are needed to do this..

– Yuvaraj
Mar 9 '16 at 4:45





Possible.. But some hacks are needed to do this..

– Yuvaraj
Mar 9 '16 at 4:45




1




1





Hardware solution: Buy a male to female USB plug and cut/isolate/remove the center lines.

– Helio
Mar 18 '16 at 10:45







Hardware solution: Buy a male to female USB plug and cut/isolate/remove the center lines.

– Helio
Mar 18 '16 at 10:45















@Helio Then why do not I just buy a USB power station...?

– bfrguci
Mar 18 '16 at 16:39





@Helio Then why do not I just buy a USB power station...?

– bfrguci
Mar 18 '16 at 16:39










1 Answer
1






active

oldest

votes


















3














First, run lsusb.



The output should be like:



Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 2232:1020
Bus 002 Device 009: ID 0bc2:a013 Seagate RSS LLC
Bus 002 Device 003: ID 0a5c:219c Broadcom Corp.


In the output, find the device number of the port to be disabled. For example, the Seagate drive in the example has Device 009 - that is its device number. Then the id will be usb[device number] - such as usb9



Then, disable USB wake-up (do this only once):



Be sure to replace X in usbX with the device number.



echo disabled | sudo tee /sys/bus/usb/devices/usbX/power/wakeup 


Then turn it off:



echo suspend | sudo tee /sys/bus/usb/devices/usbX/power/level


Undo this:



echo enabled | sudo tee /sys/bus/usb/devices/usbX/power/wakeup
echo on | sudo tee /sys/bus/usb/devices/usbX/power/level





share|improve this answer


























  • Attempted the above commands and returned... tee: /sys/bus/usb/devices/usb11/power/wakeup: No such file or directory disabled

    – Seek Truth
    Jan 3 '18 at 4:05













  • found very helpful information in this thread USB Port Power

    – Seek Truth
    Jan 3 '18 at 5:31











Your Answer








StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});


}
});














draft saved

draft discarded


















StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f741760%2fis-it-possible-to-turn-off-a-specific-usb-port-so-it-doesnt-accept-any-device%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown

























1 Answer
1






active

oldest

votes








1 Answer
1






active

oldest

votes









active

oldest

votes






active

oldest

votes









3














First, run lsusb.



The output should be like:



Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 2232:1020
Bus 002 Device 009: ID 0bc2:a013 Seagate RSS LLC
Bus 002 Device 003: ID 0a5c:219c Broadcom Corp.


In the output, find the device number of the port to be disabled. For example, the Seagate drive in the example has Device 009 - that is its device number. Then the id will be usb[device number] - such as usb9



Then, disable USB wake-up (do this only once):



Be sure to replace X in usbX with the device number.



echo disabled | sudo tee /sys/bus/usb/devices/usbX/power/wakeup 


Then turn it off:



echo suspend | sudo tee /sys/bus/usb/devices/usbX/power/level


Undo this:



echo enabled | sudo tee /sys/bus/usb/devices/usbX/power/wakeup
echo on | sudo tee /sys/bus/usb/devices/usbX/power/level





share|improve this answer


























  • Attempted the above commands and returned... tee: /sys/bus/usb/devices/usb11/power/wakeup: No such file or directory disabled

    – Seek Truth
    Jan 3 '18 at 4:05













  • found very helpful information in this thread USB Port Power

    – Seek Truth
    Jan 3 '18 at 5:31
















3














First, run lsusb.



The output should be like:



Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 2232:1020
Bus 002 Device 009: ID 0bc2:a013 Seagate RSS LLC
Bus 002 Device 003: ID 0a5c:219c Broadcom Corp.


In the output, find the device number of the port to be disabled. For example, the Seagate drive in the example has Device 009 - that is its device number. Then the id will be usb[device number] - such as usb9



Then, disable USB wake-up (do this only once):



Be sure to replace X in usbX with the device number.



echo disabled | sudo tee /sys/bus/usb/devices/usbX/power/wakeup 


Then turn it off:



echo suspend | sudo tee /sys/bus/usb/devices/usbX/power/level


Undo this:



echo enabled | sudo tee /sys/bus/usb/devices/usbX/power/wakeup
echo on | sudo tee /sys/bus/usb/devices/usbX/power/level





share|improve this answer


























  • Attempted the above commands and returned... tee: /sys/bus/usb/devices/usb11/power/wakeup: No such file or directory disabled

    – Seek Truth
    Jan 3 '18 at 4:05













  • found very helpful information in this thread USB Port Power

    – Seek Truth
    Jan 3 '18 at 5:31














3












3








3







First, run lsusb.



The output should be like:



Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 2232:1020
Bus 002 Device 009: ID 0bc2:a013 Seagate RSS LLC
Bus 002 Device 003: ID 0a5c:219c Broadcom Corp.


In the output, find the device number of the port to be disabled. For example, the Seagate drive in the example has Device 009 - that is its device number. Then the id will be usb[device number] - such as usb9



Then, disable USB wake-up (do this only once):



Be sure to replace X in usbX with the device number.



echo disabled | sudo tee /sys/bus/usb/devices/usbX/power/wakeup 


Then turn it off:



echo suspend | sudo tee /sys/bus/usb/devices/usbX/power/level


Undo this:



echo enabled | sudo tee /sys/bus/usb/devices/usbX/power/wakeup
echo on | sudo tee /sys/bus/usb/devices/usbX/power/level





share|improve this answer















First, run lsusb.



The output should be like:



Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 2232:1020
Bus 002 Device 009: ID 0bc2:a013 Seagate RSS LLC
Bus 002 Device 003: ID 0a5c:219c Broadcom Corp.


In the output, find the device number of the port to be disabled. For example, the Seagate drive in the example has Device 009 - that is its device number. Then the id will be usb[device number] - such as usb9



Then, disable USB wake-up (do this only once):



Be sure to replace X in usbX with the device number.



echo disabled | sudo tee /sys/bus/usb/devices/usbX/power/wakeup 


Then turn it off:



echo suspend | sudo tee /sys/bus/usb/devices/usbX/power/level


Undo this:



echo enabled | sudo tee /sys/bus/usb/devices/usbX/power/wakeup
echo on | sudo tee /sys/bus/usb/devices/usbX/power/level






share|improve this answer














share|improve this answer



share|improve this answer








edited Oct 6 '17 at 2:16









Roarz

33




33










answered Mar 26 '16 at 16:29









UniversallyUniqueIDUniversallyUniqueID

3,46011742




3,46011742













  • Attempted the above commands and returned... tee: /sys/bus/usb/devices/usb11/power/wakeup: No such file or directory disabled

    – Seek Truth
    Jan 3 '18 at 4:05













  • found very helpful information in this thread USB Port Power

    – Seek Truth
    Jan 3 '18 at 5:31



















  • Attempted the above commands and returned... tee: /sys/bus/usb/devices/usb11/power/wakeup: No such file or directory disabled

    – Seek Truth
    Jan 3 '18 at 4:05













  • found very helpful information in this thread USB Port Power

    – Seek Truth
    Jan 3 '18 at 5:31

















Attempted the above commands and returned... tee: /sys/bus/usb/devices/usb11/power/wakeup: No such file or directory disabled

– Seek Truth
Jan 3 '18 at 4:05







Attempted the above commands and returned... tee: /sys/bus/usb/devices/usb11/power/wakeup: No such file or directory disabled

– Seek Truth
Jan 3 '18 at 4:05















found very helpful information in this thread USB Port Power

– Seek Truth
Jan 3 '18 at 5:31





found very helpful information in this thread USB Port Power

– Seek Truth
Jan 3 '18 at 5:31


















draft saved

draft discarded




















































Thanks for contributing an answer to Ask Ubuntu!


  • Please be sure to answer the question. Provide details and share your research!

But avoid



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


To learn more, see our tips on writing great answers.




draft saved


draft discarded














StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f741760%2fis-it-possible-to-turn-off-a-specific-usb-port-so-it-doesnt-accept-any-device%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown







Popular posts from this blog

數位音樂下載

When can things happen in Etherscan, such as the picture below?

格利澤436b