Ubuntu 18.04 fails to mount SD card while Windows 10 reads it perfectly
0
The SD card is NTFS formatted.
Ubuntu 18.04 fails to mount SD card while Windows 10 reads it perfectly and reports no errors.
Actually, Ubuntu will not even boot with the SD card inserted. ANy ideas/Suggestions?
I know there are similar questions around, although in my case it has nothing (?) to do with SD card erroneous partitions or not functioning since it works perfectly under windows 10. None of the found answers to previous similar questions seem to apply her (!?)
Here's the dmesg output
[ 9872.433010] mmc0: Timeout waiting for hardware interrupt.
[ 9872.433015] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 9872.433020] mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000603
[ 9872.433024] mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000008
[ 9872.433028] mmc0: sdhci: Argument: 0x0eb875b0 | Trn mode: 0x0000003b
[ 9872.433032] mmc0: sdhci: Present: 0x01ff0000 | Host ctl: 0x00000017
[ 9872.433037] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 9872.433042] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 9872.433046] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 9872.433050] mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 9872.433055] mmc0: sdhci: AC12 err: 0x00000004 | Slot int: 0x00000000
[ 9872.433059] mmc0: sdhci: Caps: 0x25bec8bf | Caps_1: 0x1000207f
[ 9872.433064] mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x005800c8
[ 9872.433068] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x20307470
[ 9872.433072] mmc0: sdhci: Resp[2]: 0x20202020 | Resp[3]: 0x00000b00
[ 9872.433075] mmc0: sdhci: Host ctl2: 0x0000800b
[ 9872.433080] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34800208
[ 9872.433081] mmc0: sdhci: ============================================
[ 9872.433181] mmcblk0: error -110 sending stop command, original cmd response 0x0, card status 0x400900
[ 9872.433184] mmcblk0: error -110 transferring data, sector 246969776, nr 8, cmd response 0x0, card status 0x0
[ 9873.265026] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 9873.351446] mmcblk0: response CRC error sending r/w cmd command, card status 0x900
[ 9873.405031] mmc0: Tuning timeout, falling back to fixed sampling clock
drivers mount sd-card
edited May 1 '18 at 12:00
dobey
32.7k33586
asked May 1 '18 at 10:48
A.M.A.M.
12
add a comment |
0
The SD card is NTFS formatted.
Ubuntu 18.04 fails to mount SD card while Windows 10 reads it perfectly and reports no errors.
Actually, Ubuntu will not even boot with the SD card inserted. ANy ideas/Suggestions?
I know there are similar questions around, although in my case it has nothing (?) to do with SD card erroneous partitions or not functioning since it works perfectly under windows 10. None of the found answers to previous similar questions seem to apply her (!?)
Here's the dmesg output
[ 9872.433010] mmc0: Timeout waiting for hardware interrupt.
[ 9872.433015] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 9872.433020] mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000603
[ 9872.433024] mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000008
[ 9872.433028] mmc0: sdhci: Argument: 0x0eb875b0 | Trn mode: 0x0000003b
[ 9872.433032] mmc0: sdhci: Present: 0x01ff0000 | Host ctl: 0x00000017
[ 9872.433037] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 9872.433042] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 9872.433046] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 9872.433050] mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 9872.433055] mmc0: sdhci: AC12 err: 0x00000004 | Slot int: 0x00000000
[ 9872.433059] mmc0: sdhci: Caps: 0x25bec8bf | Caps_1: 0x1000207f
[ 9872.433064] mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x005800c8
[ 9872.433068] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x20307470
[ 9872.433072] mmc0: sdhci: Resp[2]: 0x20202020 | Resp[3]: 0x00000b00
[ 9872.433075] mmc0: sdhci: Host ctl2: 0x0000800b
[ 9872.433080] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34800208
[ 9872.433081] mmc0: sdhci: ============================================
[ 9872.433181] mmcblk0: error -110 sending stop command, original cmd response 0x0, card status 0x400900
[ 9872.433184] mmcblk0: error -110 transferring data, sector 246969776, nr 8, cmd response 0x0, card status 0x0
[ 9873.265026] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 9873.351446] mmcblk0: response CRC error sending r/w cmd command, card status 0x900
[ 9873.405031] mmc0: Tuning timeout, falling back to fixed sampling clock
drivers mount sd-card
edited May 1 '18 at 12:00
dobey
32.7k33586
asked May 1 '18 at 10:48
A.M.A.M.
12
Ubuntu could always detect but never mount any SD card from my laptops built in card reader, regardless of format. Hope you'll find your solution.
– HattinGokbori87
May 1 '18 at 11:26
1
This looks like a driver issue perhaps, with the MMC controller in question. Do you have an alternate reader to try that you can connect via USB?
– dobey
May 1 '18 at 12:02
Yes, you are right! It is an MMC controller issue! The card is read mounted and read perfectly when using an exteranl USB reader! Thank you!
– A.M.
May 1 '18 at 19:20
Does this solve it?: askubuntu.com/questions/787088/…
– WinEunuuchs2Unix
Jul 23 '18 at 0:54
add a comment |
0
0
0
The SD card is NTFS formatted.
Ubuntu 18.04 fails to mount SD card while Windows 10 reads it perfectly and reports no errors.
Actually, Ubuntu will not even boot with the SD card inserted. ANy ideas/Suggestions?
I know there are similar questions around, although in my case it has nothing (?) to do with SD card erroneous partitions or not functioning since it works perfectly under windows 10. None of the found answers to previous similar questions seem to apply her (!?)
Here's the dmesg output
[ 9872.433010] mmc0: Timeout waiting for hardware interrupt.
[ 9872.433015] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 9872.433020] mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000603
[ 9872.433024] mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000008
[ 9872.433028] mmc0: sdhci: Argument: 0x0eb875b0 | Trn mode: 0x0000003b
[ 9872.433032] mmc0: sdhci: Present: 0x01ff0000 | Host ctl: 0x00000017
[ 9872.433037] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 9872.433042] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 9872.433046] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 9872.433050] mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 9872.433055] mmc0: sdhci: AC12 err: 0x00000004 | Slot int: 0x00000000
[ 9872.433059] mmc0: sdhci: Caps: 0x25bec8bf | Caps_1: 0x1000207f
[ 9872.433064] mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x005800c8
[ 9872.433068] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x20307470
[ 9872.433072] mmc0: sdhci: Resp[2]: 0x20202020 | Resp[3]: 0x00000b00
[ 9872.433075] mmc0: sdhci: Host ctl2: 0x0000800b
[ 9872.433080] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34800208
[ 9872.433081] mmc0: sdhci: ============================================
[ 9872.433181] mmcblk0: error -110 sending stop command, original cmd response 0x0, card status 0x400900
[ 9872.433184] mmcblk0: error -110 transferring data, sector 246969776, nr 8, cmd response 0x0, card status 0x0
[ 9873.265026] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 9873.351446] mmcblk0: response CRC error sending r/w cmd command, card status 0x900
[ 9873.405031] mmc0: Tuning timeout, falling back to fixed sampling clock
drivers mount sd-card
edited May 1 '18 at 12:00
dobey
32.7k33586
asked May 1 '18 at 10:48
A.M.A.M.
12
The SD card is NTFS formatted.
Ubuntu 18.04 fails to mount SD card while Windows 10 reads it perfectly and reports no errors.
Actually, Ubuntu will not even boot with the SD card inserted. ANy ideas/Suggestions?
I know there are similar questions around, although in my case it has nothing (?) to do with SD card erroneous partitions or not functioning since it works perfectly under windows 10. None of the found answers to previous similar questions seem to apply her (!?)
Here's the dmesg output
[ 9872.433010] mmc0: Timeout waiting for hardware interrupt.
[ 9872.433015] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 9872.433020] mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000603
[ 9872.433024] mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000008
[ 9872.433028] mmc0: sdhci: Argument: 0x0eb875b0 | Trn mode: 0x0000003b
[ 9872.433032] mmc0: sdhci: Present: 0x01ff0000 | Host ctl: 0x00000017
[ 9872.433037] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 9872.433042] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 9872.433046] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 9872.433050] mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 9872.433055] mmc0: sdhci: AC12 err: 0x00000004 | Slot int: 0x00000000
[ 9872.433059] mmc0: sdhci: Caps: 0x25bec8bf | Caps_1: 0x1000207f
[ 9872.433064] mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x005800c8
[ 9872.433068] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x20307470
[ 9872.433072] mmc0: sdhci: Resp[2]: 0x20202020 | Resp[3]: 0x00000b00
[ 9872.433075] mmc0: sdhci: Host ctl2: 0x0000800b
[ 9872.433080] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34800208
[ 9872.433081] mmc0: sdhci: ============================================
[ 9872.433181] mmcblk0: error -110 sending stop command, original cmd response 0x0, card status 0x400900
[ 9872.433184] mmcblk0: error -110 transferring data, sector 246969776, nr 8, cmd response 0x0, card status 0x0
[ 9873.265026] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 9873.351446] mmcblk0: response CRC error sending r/w cmd command, card status 0x900
[ 9873.405031] mmc0: Tuning timeout, falling back to fixed sampling clock
drivers mount sd-card
drivers mount sd-card
edited May 1 '18 at 12:00
dobey
32.7k33586
asked May 1 '18 at 10:48
A.M.A.M.
12
edited May 1 '18 at 12:00
dobey
32.7k33586
asked May 1 '18 at 10:48
A.M.A.M.
12
edited May 1 '18 at 12:00
dobey
32.7k33586
edited May 1 '18 at 12:00
dobey
32.7k33586
edited May 1 '18 at 12:00
dobey
32.7k33586
32.7k33586
asked May 1 '18 at 10:48
A.M.A.M.
12
asked May 1 '18 at 10:48
A.M.A.M.
12
asked May 1 '18 at 10:48
A.M.A.M.
12
12
Ubuntu could always detect but never mount any SD card from my laptops built in card reader, regardless of format. Hope you'll find your solution.
– HattinGokbori87
May 1 '18 at 11:26
1
This looks like a driver issue perhaps, with the MMC controller in question. Do you have an alternate reader to try that you can connect via USB?
– dobey
May 1 '18 at 12:02
Yes, you are right! It is an MMC controller issue! The card is read mounted and read perfectly when using an exteranl USB reader! Thank you!
– A.M.
May 1 '18 at 19:20
Does this solve it?: askubuntu.com/questions/787088/…
– WinEunuuchs2Unix
Jul 23 '18 at 0:54
add a comment |
Ubuntu could always detect but never mount any SD card from my laptops built in card reader, regardless of format. Hope you'll find your solution.
– HattinGokbori87
May 1 '18 at 11:26
1
This looks like a driver issue perhaps, with the MMC controller in question. Do you have an alternate reader to try that you can connect via USB?
– dobey
May 1 '18 at 12:02
Yes, you are right! It is an MMC controller issue! The card is read mounted and read perfectly when using an exteranl USB reader! Thank you!
– A.M.
May 1 '18 at 19:20
Does this solve it?: askubuntu.com/questions/787088/…
– WinEunuuchs2Unix
Jul 23 '18 at 0:54
Ubuntu could always detect but never mount any SD card from my laptops built in card reader, regardless of format. Hope you'll find your solution.
– HattinGokbori87
May 1 '18 at 11:26
Ubuntu could always detect but never mount any SD card from my laptops built in card reader, regardless of format. Hope you'll find your solution.
– HattinGokbori87
May 1 '18 at 11:26
1
1
This looks like a driver issue perhaps, with the MMC controller in question. Do you have an alternate reader to try that you can connect via USB?
– dobey
May 1 '18 at 12:02
This looks like a driver issue perhaps, with the MMC controller in question. Do you have an alternate reader to try that you can connect via USB?
– dobey
May 1 '18 at 12:02
Yes, you are right! It is an MMC controller issue! The card is read mounted and read perfectly when using an exteranl USB reader! Thank you!
– A.M.
May 1 '18 at 19:20
Yes, you are right! It is an MMC controller issue! The card is read mounted and read perfectly when using an exteranl USB reader! Thank you!
– A.M.
May 1 '18 at 19:20
Does this solve it?: askubuntu.com/questions/787088/…
– WinEunuuchs2Unix
Jul 23 '18 at 0:54
Does this solve it?: askubuntu.com/questions/787088/…
– WinEunuuchs2Unix
Jul 23 '18 at 0:54
add a comment |
2 Answers
2
active
oldest
votes
0
Have you tried this help: https://help.ubuntu.com/stable/ubuntu-help/hardware-cardreader.html.en ?
Summary: open the Files app in the Activities list, and look under Other Activities for your sd card.
See also my question: internal sd card reader works, but without automount
answered Jul 22 '18 at 22:45
RolandRoland
1224
My problem appears at boot time. If I boot without an inserted card, it can be subsequently mounted once inserted
– A.M.
9 hours ago
add a comment |
0
This is clearly a driver issue. With the card in place, Ubuntu will not boot! However, removing the card and booting into Ubuntu, it will happily (alas under protest!) mount the card and work just fine with it, both writing and reading flawlessly!
So this is the workaround:
(1) remove the card and boot,
(2) once booted, insert card.
Not happy, but at least in work mode :-)
After all upgrades since the first post, the messages have slightly changed to the following now:
[ 45.792114] mmc0: Timeout waiting for hardware interrupt.
[ 45.792122] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 45.792130] mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000603
[ 45.792137] mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000008
[ 45.792143] mmc0: sdhci: Argument: 0x0eb877f0 | Trn mode: 0x0000003b
[ 45.792150] mmc0: sdhci: Present: 0x01ff0000 | Host ctl: 0x00000017
[ 45.792156] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 45.792163] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 45.792169] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 45.792175] mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 45.792181] mmc0: sdhci: AC12 err: 0x00000004 | Slot int: 0x00000000
[ 45.792188] mmc0: sdhci: Caps: 0x25bec8bf | Caps_1: 0x1000207f
[ 45.792195] mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x005800c8
[ 45.792201] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x20307470
[ 45.792208] mmc0: sdhci: Resp[2]: 0x20202020 | Resp[3]: 0x00000900
[ 45.792212] mmc0: sdhci: Host ctl2: 0x0000800b
[ 45.792218] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34400208
[ 45.792221] mmc0: sdhci: ============================================
[ 45.792336] mmcblk0: error -84 sending status command, retrying
[ 45.848023] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 45.848080] mmcblk0: error -110 sending stop command, original cmd response 0x0, card status 0x900
[ 45.848084] mmcblk0: error -110 transferring data, sector 246970352, nr 8, cmd response 0x0, card status 0x0
[ 47.420016] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 47.439278] mmcblk0: response CRC error sending r/w cmd command, card status 0x900
[ 47.492021] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 47.497364] mmcblk0: response CRC error sending r/w cmd command, card status 0x900
[ 47.556026] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 52.575443] Bluetooth: RFCOMM TTY layer initialized
[ 52.575449] Bluetooth: RFCOMM socket layer initialized
[ 52.575454] Bluetooth: RFCOMM ver 1.11
[ 62.432012] mmc0: Timeout waiting for hardware interrupt.
[ 62.432018] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 62.432023] mmc0: sdhci: Sys addr: 0x000000c0 | Version: 0x00000603
[ 62.432027] mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x000000c0
[ 62.432031] mmc0: sdhci: Argument: 0x0000005f | Trn mode: 0x0000003b
[ 62.432035] mmc0: sdhci: Present: 0x01ff0000 | Host ctl: 0x00000017
[ 62.432040] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 62.432044] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 62.432048] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 62.432052] mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 62.432057] mmc0: sdhci: AC12 err: 0x00000004 | Slot int: 0x00000000
[ 62.432061] mmc0: sdhci: Caps: 0x25bec8bf | Caps_1: 0x1000207f
[ 62.432065] mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x005800c8
[ 62.432069] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x20307470
[ 62.432074] mmc0: sdhci: Resp[2]: 0x20202020 | Resp[3]: 0x00000900
[ 62.432076] mmc0: sdhci: Host ctl2: 0x0000800b
[ 62.432081] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34400208
[ 62.432082] mmc0: sdhci: ============================================
[ 62.432204] mmcblk0: error -84 sending status command, retrying
[ 62.488013] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 62.488087] mmcblk0: error -110 sending stop command, original cmd response 0x0, card status 0x900
[ 62.488089] mmcblk0: error -110 transferring data, sector 95, nr 192, cmd response 0x0, card status 0x0
[ 64.804015] mmc0: Tuning timeout, falling back to fixed sampling clock
edited 2 hours ago
tinlyx
82821224
answered 9 hours ago
A.M.A.M.
12
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1030529%2fubuntu-18-04-fails-to-mount-sd-card-while-windows-10-reads-it-perfectly%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
0
Have you tried this help: https://help.ubuntu.com/stable/ubuntu-help/hardware-cardreader.html.en ?
Summary: open the Files app in the Activities list, and look under Other Activities for your sd card.
See also my question: internal sd card reader works, but without automount
answered Jul 22 '18 at 22:45
RolandRoland
1224
My problem appears at boot time. If I boot without an inserted card, it can be subsequently mounted once inserted
– A.M.
9 hours ago
add a comment |
0
Have you tried this help: https://help.ubuntu.com/stable/ubuntu-help/hardware-cardreader.html.en ?
Summary: open the Files app in the Activities list, and look under Other Activities for your sd card.
See also my question: internal sd card reader works, but without automount
answered Jul 22 '18 at 22:45
RolandRoland
1224
My problem appears at boot time. If I boot without an inserted card, it can be subsequently mounted once inserted
– A.M.
9 hours ago
add a comment |
0
0
0
Have you tried this help: https://help.ubuntu.com/stable/ubuntu-help/hardware-cardreader.html.en ?
Summary: open the Files app in the Activities list, and look under Other Activities for your sd card.
See also my question: internal sd card reader works, but without automount
answered Jul 22 '18 at 22:45
RolandRoland
1224
Have you tried this help: https://help.ubuntu.com/stable/ubuntu-help/hardware-cardreader.html.en ?
Summary: open the Files app in the Activities list, and look under Other Activities for your sd card.
See also my question: internal sd card reader works, but without automount
answered Jul 22 '18 at 22:45
RolandRoland
1224
answered Jul 22 '18 at 22:45
RolandRoland
1224
answered Jul 22 '18 at 22:45
RolandRoland
1224
answered Jul 22 '18 at 22:45
RolandRoland
1224
1224
My problem appears at boot time. If I boot without an inserted card, it can be subsequently mounted once inserted
– A.M.
9 hours ago
add a comment |
My problem appears at boot time. If I boot without an inserted card, it can be subsequently mounted once inserted
– A.M.
9 hours ago
My problem appears at boot time. If I boot without an inserted card, it can be subsequently mounted once inserted
– A.M.
9 hours ago
My problem appears at boot time. If I boot without an inserted card, it can be subsequently mounted once inserted
– A.M.
9 hours ago
add a comment |
0
This is clearly a driver issue. With the card in place, Ubuntu will not boot! However, removing the card and booting into Ubuntu, it will happily (alas under protest!) mount the card and work just fine with it, both writing and reading flawlessly!
So this is the workaround:
(1) remove the card and boot,
(2) once booted, insert card.
Not happy, but at least in work mode :-)
After all upgrades since the first post, the messages have slightly changed to the following now:
[ 45.792114] mmc0: Timeout waiting for hardware interrupt.
[ 45.792122] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 45.792130] mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000603
[ 45.792137] mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000008
[ 45.792143] mmc0: sdhci: Argument: 0x0eb877f0 | Trn mode: 0x0000003b
[ 45.792150] mmc0: sdhci: Present: 0x01ff0000 | Host ctl: 0x00000017
[ 45.792156] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 45.792163] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 45.792169] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 45.792175] mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 45.792181] mmc0: sdhci: AC12 err: 0x00000004 | Slot int: 0x00000000
[ 45.792188] mmc0: sdhci: Caps: 0x25bec8bf | Caps_1: 0x1000207f
[ 45.792195] mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x005800c8
[ 45.792201] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x20307470
[ 45.792208] mmc0: sdhci: Resp[2]: 0x20202020 | Resp[3]: 0x00000900
[ 45.792212] mmc0: sdhci: Host ctl2: 0x0000800b
[ 45.792218] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34400208
[ 45.792221] mmc0: sdhci: ============================================
[ 45.792336] mmcblk0: error -84 sending status command, retrying
[ 45.848023] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 45.848080] mmcblk0: error -110 sending stop command, original cmd response 0x0, card status 0x900
[ 45.848084] mmcblk0: error -110 transferring data, sector 246970352, nr 8, cmd response 0x0, card status 0x0
[ 47.420016] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 47.439278] mmcblk0: response CRC error sending r/w cmd command, card status 0x900
[ 47.492021] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 47.497364] mmcblk0: response CRC error sending r/w cmd command, card status 0x900
[ 47.556026] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 52.575443] Bluetooth: RFCOMM TTY layer initialized
[ 52.575449] Bluetooth: RFCOMM socket layer initialized
[ 52.575454] Bluetooth: RFCOMM ver 1.11
[ 62.432012] mmc0: Timeout waiting for hardware interrupt.
[ 62.432018] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 62.432023] mmc0: sdhci: Sys addr: 0x000000c0 | Version: 0x00000603
[ 62.432027] mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x000000c0
[ 62.432031] mmc0: sdhci: Argument: 0x0000005f | Trn mode: 0x0000003b
[ 62.432035] mmc0: sdhci: Present: 0x01ff0000 | Host ctl: 0x00000017
[ 62.432040] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 62.432044] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 62.432048] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 62.432052] mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 62.432057] mmc0: sdhci: AC12 err: 0x00000004 | Slot int: 0x00000000
[ 62.432061] mmc0: sdhci: Caps: 0x25bec8bf | Caps_1: 0x1000207f
[ 62.432065] mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x005800c8
[ 62.432069] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x20307470
[ 62.432074] mmc0: sdhci: Resp[2]: 0x20202020 | Resp[3]: 0x00000900
[ 62.432076] mmc0: sdhci: Host ctl2: 0x0000800b
[ 62.432081] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34400208
[ 62.432082] mmc0: sdhci: ============================================
[ 62.432204] mmcblk0: error -84 sending status command, retrying
[ 62.488013] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 62.488087] mmcblk0: error -110 sending stop command, original cmd response 0x0, card status 0x900
[ 62.488089] mmcblk0: error -110 transferring data, sector 95, nr 192, cmd response 0x0, card status 0x0
[ 64.804015] mmc0: Tuning timeout, falling back to fixed sampling clock
edited 2 hours ago
tinlyx
82821224
answered 9 hours ago
A.M.A.M.
12
add a comment |
0
This is clearly a driver issue. With the card in place, Ubuntu will not boot! However, removing the card and booting into Ubuntu, it will happily (alas under protest!) mount the card and work just fine with it, both writing and reading flawlessly!
So this is the workaround:
(1) remove the card and boot,
(2) once booted, insert card.
Not happy, but at least in work mode :-)
After all upgrades since the first post, the messages have slightly changed to the following now:
[ 45.792114] mmc0: Timeout waiting for hardware interrupt.
[ 45.792122] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 45.792130] mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000603
[ 45.792137] mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000008
[ 45.792143] mmc0: sdhci: Argument: 0x0eb877f0 | Trn mode: 0x0000003b
[ 45.792150] mmc0: sdhci: Present: 0x01ff0000 | Host ctl: 0x00000017
[ 45.792156] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 45.792163] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 45.792169] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 45.792175] mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 45.792181] mmc0: sdhci: AC12 err: 0x00000004 | Slot int: 0x00000000
[ 45.792188] mmc0: sdhci: Caps: 0x25bec8bf | Caps_1: 0x1000207f
[ 45.792195] mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x005800c8
[ 45.792201] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x20307470
[ 45.792208] mmc0: sdhci: Resp[2]: 0x20202020 | Resp[3]: 0x00000900
[ 45.792212] mmc0: sdhci: Host ctl2: 0x0000800b
[ 45.792218] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34400208
[ 45.792221] mmc0: sdhci: ============================================
[ 45.792336] mmcblk0: error -84 sending status command, retrying
[ 45.848023] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 45.848080] mmcblk0: error -110 sending stop command, original cmd response 0x0, card status 0x900
[ 45.848084] mmcblk0: error -110 transferring data, sector 246970352, nr 8, cmd response 0x0, card status 0x0
[ 47.420016] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 47.439278] mmcblk0: response CRC error sending r/w cmd command, card status 0x900
[ 47.492021] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 47.497364] mmcblk0: response CRC error sending r/w cmd command, card status 0x900
[ 47.556026] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 52.575443] Bluetooth: RFCOMM TTY layer initialized
[ 52.575449] Bluetooth: RFCOMM socket layer initialized
[ 52.575454] Bluetooth: RFCOMM ver 1.11
[ 62.432012] mmc0: Timeout waiting for hardware interrupt.
[ 62.432018] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 62.432023] mmc0: sdhci: Sys addr: 0x000000c0 | Version: 0x00000603
[ 62.432027] mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x000000c0
[ 62.432031] mmc0: sdhci: Argument: 0x0000005f | Trn mode: 0x0000003b
[ 62.432035] mmc0: sdhci: Present: 0x01ff0000 | Host ctl: 0x00000017
[ 62.432040] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 62.432044] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 62.432048] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 62.432052] mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 62.432057] mmc0: sdhci: AC12 err: 0x00000004 | Slot int: 0x00000000
[ 62.432061] mmc0: sdhci: Caps: 0x25bec8bf | Caps_1: 0x1000207f
[ 62.432065] mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x005800c8
[ 62.432069] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x20307470
[ 62.432074] mmc0: sdhci: Resp[2]: 0x20202020 | Resp[3]: 0x00000900
[ 62.432076] mmc0: sdhci: Host ctl2: 0x0000800b
[ 62.432081] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34400208
[ 62.432082] mmc0: sdhci: ============================================
[ 62.432204] mmcblk0: error -84 sending status command, retrying
[ 62.488013] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 62.488087] mmcblk0: error -110 sending stop command, original cmd response 0x0, card status 0x900
[ 62.488089] mmcblk0: error -110 transferring data, sector 95, nr 192, cmd response 0x0, card status 0x0
[ 64.804015] mmc0: Tuning timeout, falling back to fixed sampling clock
edited 2 hours ago
tinlyx
82821224
answered 9 hours ago
A.M.A.M.
12
add a comment |
0
0
0
This is clearly a driver issue. With the card in place, Ubuntu will not boot! However, removing the card and booting into Ubuntu, it will happily (alas under protest!) mount the card and work just fine with it, both writing and reading flawlessly!
So this is the workaround:
(1) remove the card and boot,
(2) once booted, insert card.
Not happy, but at least in work mode :-)
After all upgrades since the first post, the messages have slightly changed to the following now:
[ 45.792114] mmc0: Timeout waiting for hardware interrupt.
[ 45.792122] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 45.792130] mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000603
[ 45.792137] mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000008
[ 45.792143] mmc0: sdhci: Argument: 0x0eb877f0 | Trn mode: 0x0000003b
[ 45.792150] mmc0: sdhci: Present: 0x01ff0000 | Host ctl: 0x00000017
[ 45.792156] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 45.792163] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 45.792169] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 45.792175] mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 45.792181] mmc0: sdhci: AC12 err: 0x00000004 | Slot int: 0x00000000
[ 45.792188] mmc0: sdhci: Caps: 0x25bec8bf | Caps_1: 0x1000207f
[ 45.792195] mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x005800c8
[ 45.792201] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x20307470
[ 45.792208] mmc0: sdhci: Resp[2]: 0x20202020 | Resp[3]: 0x00000900
[ 45.792212] mmc0: sdhci: Host ctl2: 0x0000800b
[ 45.792218] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34400208
[ 45.792221] mmc0: sdhci: ============================================
[ 45.792336] mmcblk0: error -84 sending status command, retrying
[ 45.848023] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 45.848080] mmcblk0: error -110 sending stop command, original cmd response 0x0, card status 0x900
[ 45.848084] mmcblk0: error -110 transferring data, sector 246970352, nr 8, cmd response 0x0, card status 0x0
[ 47.420016] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 47.439278] mmcblk0: response CRC error sending r/w cmd command, card status 0x900
[ 47.492021] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 47.497364] mmcblk0: response CRC error sending r/w cmd command, card status 0x900
[ 47.556026] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 52.575443] Bluetooth: RFCOMM TTY layer initialized
[ 52.575449] Bluetooth: RFCOMM socket layer initialized
[ 52.575454] Bluetooth: RFCOMM ver 1.11
[ 62.432012] mmc0: Timeout waiting for hardware interrupt.
[ 62.432018] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 62.432023] mmc0: sdhci: Sys addr: 0x000000c0 | Version: 0x00000603
[ 62.432027] mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x000000c0
[ 62.432031] mmc0: sdhci: Argument: 0x0000005f | Trn mode: 0x0000003b
[ 62.432035] mmc0: sdhci: Present: 0x01ff0000 | Host ctl: 0x00000017
[ 62.432040] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 62.432044] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 62.432048] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 62.432052] mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 62.432057] mmc0: sdhci: AC12 err: 0x00000004 | Slot int: 0x00000000
[ 62.432061] mmc0: sdhci: Caps: 0x25bec8bf | Caps_1: 0x1000207f
[ 62.432065] mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x005800c8
[ 62.432069] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x20307470
[ 62.432074] mmc0: sdhci: Resp[2]: 0x20202020 | Resp[3]: 0x00000900
[ 62.432076] mmc0: sdhci: Host ctl2: 0x0000800b
[ 62.432081] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34400208
[ 62.432082] mmc0: sdhci: ============================================
[ 62.432204] mmcblk0: error -84 sending status command, retrying
[ 62.488013] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 62.488087] mmcblk0: error -110 sending stop command, original cmd response 0x0, card status 0x900
[ 62.488089] mmcblk0: error -110 transferring data, sector 95, nr 192, cmd response 0x0, card status 0x0
[ 64.804015] mmc0: Tuning timeout, falling back to fixed sampling clock
edited 2 hours ago
tinlyx
82821224
answered 9 hours ago
A.M.A.M.
12
This is clearly a driver issue. With the card in place, Ubuntu will not boot! However, removing the card and booting into Ubuntu, it will happily (alas under protest!) mount the card and work just fine with it, both writing and reading flawlessly!
So this is the workaround:
(1) remove the card and boot,
(2) once booted, insert card.
Not happy, but at least in work mode :-)
After all upgrades since the first post, the messages have slightly changed to the following now:
[ 45.792114] mmc0: Timeout waiting for hardware interrupt.
[ 45.792122] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 45.792130] mmc0: sdhci: Sys addr: 0x00000008 | Version: 0x00000603
[ 45.792137] mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000008
[ 45.792143] mmc0: sdhci: Argument: 0x0eb877f0 | Trn mode: 0x0000003b
[ 45.792150] mmc0: sdhci: Present: 0x01ff0000 | Host ctl: 0x00000017
[ 45.792156] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 45.792163] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 45.792169] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 45.792175] mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 45.792181] mmc0: sdhci: AC12 err: 0x00000004 | Slot int: 0x00000000
[ 45.792188] mmc0: sdhci: Caps: 0x25bec8bf | Caps_1: 0x1000207f
[ 45.792195] mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x005800c8
[ 45.792201] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x20307470
[ 45.792208] mmc0: sdhci: Resp[2]: 0x20202020 | Resp[3]: 0x00000900
[ 45.792212] mmc0: sdhci: Host ctl2: 0x0000800b
[ 45.792218] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34400208
[ 45.792221] mmc0: sdhci: ============================================
[ 45.792336] mmcblk0: error -84 sending status command, retrying
[ 45.848023] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 45.848080] mmcblk0: error -110 sending stop command, original cmd response 0x0, card status 0x900
[ 45.848084] mmcblk0: error -110 transferring data, sector 246970352, nr 8, cmd response 0x0, card status 0x0
[ 47.420016] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 47.439278] mmcblk0: response CRC error sending r/w cmd command, card status 0x900
[ 47.492021] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 47.497364] mmcblk0: response CRC error sending r/w cmd command, card status 0x900
[ 47.556026] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 52.575443] Bluetooth: RFCOMM TTY layer initialized
[ 52.575449] Bluetooth: RFCOMM socket layer initialized
[ 52.575454] Bluetooth: RFCOMM ver 1.11
[ 62.432012] mmc0: Timeout waiting for hardware interrupt.
[ 62.432018] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 62.432023] mmc0: sdhci: Sys addr: 0x000000c0 | Version: 0x00000603
[ 62.432027] mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x000000c0
[ 62.432031] mmc0: sdhci: Argument: 0x0000005f | Trn mode: 0x0000003b
[ 62.432035] mmc0: sdhci: Present: 0x01ff0000 | Host ctl: 0x00000017
[ 62.432040] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 62.432044] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 62.432048] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 62.432052] mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 62.432057] mmc0: sdhci: AC12 err: 0x00000004 | Slot int: 0x00000000
[ 62.432061] mmc0: sdhci: Caps: 0x25bec8bf | Caps_1: 0x1000207f
[ 62.432065] mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x005800c8
[ 62.432069] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x20307470
[ 62.432074] mmc0: sdhci: Resp[2]: 0x20202020 | Resp[3]: 0x00000900
[ 62.432076] mmc0: sdhci: Host ctl2: 0x0000800b
[ 62.432081] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x34400208
[ 62.432082] mmc0: sdhci: ============================================
[ 62.432204] mmcblk0: error -84 sending status command, retrying
[ 62.488013] mmc0: Tuning timeout, falling back to fixed sampling clock
[ 62.488087] mmcblk0: error -110 sending stop command, original cmd response 0x0, card status 0x900
[ 62.488089] mmcblk0: error -110 transferring data, sector 95, nr 192, cmd response 0x0, card status 0x0
[ 64.804015] mmc0: Tuning timeout, falling back to fixed sampling clock
edited 2 hours ago
tinlyx
82821224
answered 9 hours ago
A.M.A.M.
12
edited 2 hours ago
tinlyx
82821224
edited 2 hours ago
tinlyx
82821224
edited 2 hours ago
tinlyx
82821224
82821224
answered 9 hours ago
A.M.A.M.
12
answered 9 hours ago
A.M.A.M.
12
answered 9 hours ago
A.M.A.M.
12
12
add a comment |
add a comment |
draft saved
draft discarded
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1030529%2fubuntu-18-04-fails-to-mount-sd-card-while-windows-10-reads-it-perfectly%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Ubuntu could always detect but never mount any SD card from my laptops built in card reader, regardless of format. Hope you'll find your solution.
– HattinGokbori87
May 1 '18 at 11:26
1
This looks like a driver issue perhaps, with the MMC controller in question. Do you have an alternate reader to try that you can connect via USB?
– dobey
May 1 '18 at 12:02
Yes, you are right! It is an MMC controller issue! The card is read mounted and read perfectly when using an exteranl USB reader! Thank you!
– A.M.
May 1 '18 at 19:20
Does this solve it?: askubuntu.com/questions/787088/…
– WinEunuuchs2Unix
Jul 23 '18 at 0:54