GRUB refuses to reboot into a new kernal

Multi tool use
I found the menuentry/subentry that I wanted to use, as you can see here: https://gyazo.com/b73fa2308145caaed7959a95d71a4bc8
I then changed this in /etc/default/grub to this: GRUB_DEFAULT=1>0
I updated grub with: sudo update-grub
And then rebooted the system with: sudo reboot
It still loads into the same old kernal.
I am using Ubuntu 16.04.
boot grub2 kernel
New contributor
George Ashby is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
I found the menuentry/subentry that I wanted to use, as you can see here: https://gyazo.com/b73fa2308145caaed7959a95d71a4bc8
I then changed this in /etc/default/grub to this: GRUB_DEFAULT=1>0
I updated grub with: sudo update-grub
And then rebooted the system with: sudo reboot
It still loads into the same old kernal.
I am using Ubuntu 16.04.
boot grub2 kernel
New contributor
George Ashby is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
I found the menuentry/subentry that I wanted to use, as you can see here: https://gyazo.com/b73fa2308145caaed7959a95d71a4bc8
I then changed this in /etc/default/grub to this: GRUB_DEFAULT=1>0
I updated grub with: sudo update-grub
And then rebooted the system with: sudo reboot
It still loads into the same old kernal.
I am using Ubuntu 16.04.
boot grub2 kernel
New contributor
George Ashby is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
I found the menuentry/subentry that I wanted to use, as you can see here: https://gyazo.com/b73fa2308145caaed7959a95d71a4bc8
I then changed this in /etc/default/grub to this: GRUB_DEFAULT=1>0
I updated grub with: sudo update-grub
And then rebooted the system with: sudo reboot
It still loads into the same old kernal.
I am using Ubuntu 16.04.
boot grub2 kernel
boot grub2 kernel
New contributor
George Ashby is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
George Ashby is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
George Ashby is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 10 hours ago


George AshbyGeorge Ashby
1
1
New contributor
George Ashby is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
George Ashby is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
George Ashby is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
According to the documentation the format is one of
GRUB_DEFAULT="Previous Linux versions>Ubuntu, with Linux 3.2.0-18-generic-pae"
GRUB_DEFAULT="Previous Linux versions>0"
GRUB_DEFAULT="2>0"
GRUB_DEFAULT="2>Ubuntu, with Linux 3.2.0-18-generic-pae"
Your screenshot instead shows
1>0 Ubuntu, with....
It lacks the GRUB_DEFAULT=
part, the quotes "…"
, and is a
mixture of both numeric and textual item selection. Try
GRUB_DEFAULT="1>0"
I changed by GRUB_DEFAULT like you said, updated grub, and restarted the dedi server. It turned back on but was still the old kernal.
– George Ashby
9 hours ago
@GeorgeAshby Does it work when you manually select the new kernel?
– PerlDuck
9 hours ago
Sadly, I cannot open the boot menu on system startup as I dont have the ability. I bought a dedicated server off of OVH.
– George Ashby
8 hours ago
Try using the textual version "Previous Linux Versions>Ubuntu" etc. It's much more straightforward IMHO.
– Organic Marble
8 hours ago
Have you seen How to list GRUB's “menuentries” in command-line? It may help to figure out the correct item.
– PerlDuck
7 hours ago
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
George Ashby is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1117415%2fgrub-refuses-to-reboot-into-a-new-kernal%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
According to the documentation the format is one of
GRUB_DEFAULT="Previous Linux versions>Ubuntu, with Linux 3.2.0-18-generic-pae"
GRUB_DEFAULT="Previous Linux versions>0"
GRUB_DEFAULT="2>0"
GRUB_DEFAULT="2>Ubuntu, with Linux 3.2.0-18-generic-pae"
Your screenshot instead shows
1>0 Ubuntu, with....
It lacks the GRUB_DEFAULT=
part, the quotes "…"
, and is a
mixture of both numeric and textual item selection. Try
GRUB_DEFAULT="1>0"
I changed by GRUB_DEFAULT like you said, updated grub, and restarted the dedi server. It turned back on but was still the old kernal.
– George Ashby
9 hours ago
@GeorgeAshby Does it work when you manually select the new kernel?
– PerlDuck
9 hours ago
Sadly, I cannot open the boot menu on system startup as I dont have the ability. I bought a dedicated server off of OVH.
– George Ashby
8 hours ago
Try using the textual version "Previous Linux Versions>Ubuntu" etc. It's much more straightforward IMHO.
– Organic Marble
8 hours ago
Have you seen How to list GRUB's “menuentries” in command-line? It may help to figure out the correct item.
– PerlDuck
7 hours ago
add a comment |
According to the documentation the format is one of
GRUB_DEFAULT="Previous Linux versions>Ubuntu, with Linux 3.2.0-18-generic-pae"
GRUB_DEFAULT="Previous Linux versions>0"
GRUB_DEFAULT="2>0"
GRUB_DEFAULT="2>Ubuntu, with Linux 3.2.0-18-generic-pae"
Your screenshot instead shows
1>0 Ubuntu, with....
It lacks the GRUB_DEFAULT=
part, the quotes "…"
, and is a
mixture of both numeric and textual item selection. Try
GRUB_DEFAULT="1>0"
I changed by GRUB_DEFAULT like you said, updated grub, and restarted the dedi server. It turned back on but was still the old kernal.
– George Ashby
9 hours ago
@GeorgeAshby Does it work when you manually select the new kernel?
– PerlDuck
9 hours ago
Sadly, I cannot open the boot menu on system startup as I dont have the ability. I bought a dedicated server off of OVH.
– George Ashby
8 hours ago
Try using the textual version "Previous Linux Versions>Ubuntu" etc. It's much more straightforward IMHO.
– Organic Marble
8 hours ago
Have you seen How to list GRUB's “menuentries” in command-line? It may help to figure out the correct item.
– PerlDuck
7 hours ago
add a comment |
According to the documentation the format is one of
GRUB_DEFAULT="Previous Linux versions>Ubuntu, with Linux 3.2.0-18-generic-pae"
GRUB_DEFAULT="Previous Linux versions>0"
GRUB_DEFAULT="2>0"
GRUB_DEFAULT="2>Ubuntu, with Linux 3.2.0-18-generic-pae"
Your screenshot instead shows
1>0 Ubuntu, with....
It lacks the GRUB_DEFAULT=
part, the quotes "…"
, and is a
mixture of both numeric and textual item selection. Try
GRUB_DEFAULT="1>0"
According to the documentation the format is one of
GRUB_DEFAULT="Previous Linux versions>Ubuntu, with Linux 3.2.0-18-generic-pae"
GRUB_DEFAULT="Previous Linux versions>0"
GRUB_DEFAULT="2>0"
GRUB_DEFAULT="2>Ubuntu, with Linux 3.2.0-18-generic-pae"
Your screenshot instead shows
1>0 Ubuntu, with....
It lacks the GRUB_DEFAULT=
part, the quotes "…"
, and is a
mixture of both numeric and textual item selection. Try
GRUB_DEFAULT="1>0"
answered 9 hours ago


PerlDuckPerlDuck
6,57711535
6,57711535
I changed by GRUB_DEFAULT like you said, updated grub, and restarted the dedi server. It turned back on but was still the old kernal.
– George Ashby
9 hours ago
@GeorgeAshby Does it work when you manually select the new kernel?
– PerlDuck
9 hours ago
Sadly, I cannot open the boot menu on system startup as I dont have the ability. I bought a dedicated server off of OVH.
– George Ashby
8 hours ago
Try using the textual version "Previous Linux Versions>Ubuntu" etc. It's much more straightforward IMHO.
– Organic Marble
8 hours ago
Have you seen How to list GRUB's “menuentries” in command-line? It may help to figure out the correct item.
– PerlDuck
7 hours ago
add a comment |
I changed by GRUB_DEFAULT like you said, updated grub, and restarted the dedi server. It turned back on but was still the old kernal.
– George Ashby
9 hours ago
@GeorgeAshby Does it work when you manually select the new kernel?
– PerlDuck
9 hours ago
Sadly, I cannot open the boot menu on system startup as I dont have the ability. I bought a dedicated server off of OVH.
– George Ashby
8 hours ago
Try using the textual version "Previous Linux Versions>Ubuntu" etc. It's much more straightforward IMHO.
– Organic Marble
8 hours ago
Have you seen How to list GRUB's “menuentries” in command-line? It may help to figure out the correct item.
– PerlDuck
7 hours ago
I changed by GRUB_DEFAULT like you said, updated grub, and restarted the dedi server. It turned back on but was still the old kernal.
– George Ashby
9 hours ago
I changed by GRUB_DEFAULT like you said, updated grub, and restarted the dedi server. It turned back on but was still the old kernal.
– George Ashby
9 hours ago
@GeorgeAshby Does it work when you manually select the new kernel?
– PerlDuck
9 hours ago
@GeorgeAshby Does it work when you manually select the new kernel?
– PerlDuck
9 hours ago
Sadly, I cannot open the boot menu on system startup as I dont have the ability. I bought a dedicated server off of OVH.
– George Ashby
8 hours ago
Sadly, I cannot open the boot menu on system startup as I dont have the ability. I bought a dedicated server off of OVH.
– George Ashby
8 hours ago
Try using the textual version "Previous Linux Versions>Ubuntu" etc. It's much more straightforward IMHO.
– Organic Marble
8 hours ago
Try using the textual version "Previous Linux Versions>Ubuntu" etc. It's much more straightforward IMHO.
– Organic Marble
8 hours ago
Have you seen How to list GRUB's “menuentries” in command-line? It may help to figure out the correct item.
– PerlDuck
7 hours ago
Have you seen How to list GRUB's “menuentries” in command-line? It may help to figure out the correct item.
– PerlDuck
7 hours ago
add a comment |
George Ashby is a new contributor. Be nice, and check out our Code of Conduct.
George Ashby is a new contributor. Be nice, and check out our Code of Conduct.
George Ashby is a new contributor. Be nice, and check out our Code of Conduct.
George Ashby is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1117415%2fgrub-refuses-to-reboot-into-a-new-kernal%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
FL4HggHCr4 hvRPuXlSL7CZnAhTu7QhL IwOnG