gparted - Disk size smaller after creating partition table + old data gone





.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ margin-bottom:0;
}







1















I had the same issue as the guy posting on Trouble creating 3TB ext4 partition due to msdos-partition-table-imposed error



The new 6TB drive I got was only issues 2TB by Microsoft so I booted into gparted "Device->Create Partition Table and select "gpt" from the list." I then booted back up into Windows and G: drive was no longer mounted. I deleted disk0 and recreated it inside Windows disk management however as you can see in the screenshot below the disk size is only 5589GB. Should it be more?



I did use about 300GB of data before doing this and I would like to recover that data but both Windows and gparted can't detect anything more than the 5589GB.



enter image description here










share|improve this question





























    1















    I had the same issue as the guy posting on Trouble creating 3TB ext4 partition due to msdos-partition-table-imposed error



    The new 6TB drive I got was only issues 2TB by Microsoft so I booted into gparted "Device->Create Partition Table and select "gpt" from the list." I then booted back up into Windows and G: drive was no longer mounted. I deleted disk0 and recreated it inside Windows disk management however as you can see in the screenshot below the disk size is only 5589GB. Should it be more?



    I did use about 300GB of data before doing this and I would like to recover that data but both Windows and gparted can't detect anything more than the 5589GB.



    enter image description here










    share|improve this question

























      1












      1








      1








      I had the same issue as the guy posting on Trouble creating 3TB ext4 partition due to msdos-partition-table-imposed error



      The new 6TB drive I got was only issues 2TB by Microsoft so I booted into gparted "Device->Create Partition Table and select "gpt" from the list." I then booted back up into Windows and G: drive was no longer mounted. I deleted disk0 and recreated it inside Windows disk management however as you can see in the screenshot below the disk size is only 5589GB. Should it be more?



      I did use about 300GB of data before doing this and I would like to recover that data but both Windows and gparted can't detect anything more than the 5589GB.



      enter image description here










      share|improve this question














      I had the same issue as the guy posting on Trouble creating 3TB ext4 partition due to msdos-partition-table-imposed error



      The new 6TB drive I got was only issues 2TB by Microsoft so I booted into gparted "Device->Create Partition Table and select "gpt" from the list." I then booted back up into Windows and G: drive was no longer mounted. I deleted disk0 and recreated it inside Windows disk management however as you can see in the screenshot below the disk size is only 5589GB. Should it be more?



      I did use about 300GB of data before doing this and I would like to recover that data but both Windows and gparted can't detect anything more than the 5589GB.



      enter image description here







      partitioning gparted






      share|improve this question













      share|improve this question











      share|improve this question




      share|improve this question










      asked Mar 28 at 18:07









      ToodardayToodarday

      156




      156






















          1 Answer
          1






          active

          oldest

          votes


















          1














          This is due to the 1000 vs. 1024 bytes problem.



          You see, assuming 1024, a 6TB drive can hold 6.6E12 bytes. However, assuming 1000, it can hold 6E12 bytes.



          The difference between the two is 6E11 bytes, or 559GB. Thus, your reported capacity is 559GB less than what you think it should be.






          share|improve this answer


























          • Ok thanks for the reply. So the initial data I installed is gone? I am using full capacity of the drive at it's current state?

            – Toodarday
            Mar 28 at 18:40











          • @Toodarday your data is not gone, although it may be very difficult to recover depending on how much disk I/O has been done since you re-formatted. For the future, please always make backups, especially if you're doing anything potentially dangerous like messing with partitions.

            – Android Dev
            Mar 28 at 18:42













          • Ok thanks for the advice. It was not important data, luckily.

            – Toodarday
            Mar 28 at 18:43











          • @Toodarday that's good :) also, see here for more reading on 1000 vs 1024.

            – Android Dev
            Mar 28 at 18:45














          Your Answer








          StackExchange.ready(function() {
          var channelOptions = {
          tags: "".split(" "),
          id: "89"
          };
          initTagRenderer("".split(" "), "".split(" "), channelOptions);

          StackExchange.using("externalEditor", function() {
          // Have to fire editor after snippets, if snippets enabled
          if (StackExchange.settings.snippets.snippetsEnabled) {
          StackExchange.using("snippets", function() {
          createEditor();
          });
          }
          else {
          createEditor();
          }
          });

          function createEditor() {
          StackExchange.prepareEditor({
          heartbeatType: 'answer',
          autoActivateHeartbeat: false,
          convertImagesToLinks: true,
          noModals: true,
          showLowRepImageUploadWarning: true,
          reputationToPostImages: 10,
          bindNavPrevention: true,
          postfix: "",
          imageUploader: {
          brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
          contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
          allowUrls: true
          },
          onDemand: true,
          discardSelector: ".discard-answer"
          ,immediatelyShowMarkdownHelp:true
          });


          }
          });














          draft saved

          draft discarded


















          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1129477%2fgparted-disk-size-smaller-after-creating-partition-table-old-data-gone%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown

























          1 Answer
          1






          active

          oldest

          votes








          1 Answer
          1






          active

          oldest

          votes









          active

          oldest

          votes






          active

          oldest

          votes









          1














          This is due to the 1000 vs. 1024 bytes problem.



          You see, assuming 1024, a 6TB drive can hold 6.6E12 bytes. However, assuming 1000, it can hold 6E12 bytes.



          The difference between the two is 6E11 bytes, or 559GB. Thus, your reported capacity is 559GB less than what you think it should be.






          share|improve this answer


























          • Ok thanks for the reply. So the initial data I installed is gone? I am using full capacity of the drive at it's current state?

            – Toodarday
            Mar 28 at 18:40











          • @Toodarday your data is not gone, although it may be very difficult to recover depending on how much disk I/O has been done since you re-formatted. For the future, please always make backups, especially if you're doing anything potentially dangerous like messing with partitions.

            – Android Dev
            Mar 28 at 18:42













          • Ok thanks for the advice. It was not important data, luckily.

            – Toodarday
            Mar 28 at 18:43











          • @Toodarday that's good :) also, see here for more reading on 1000 vs 1024.

            – Android Dev
            Mar 28 at 18:45


















          1














          This is due to the 1000 vs. 1024 bytes problem.



          You see, assuming 1024, a 6TB drive can hold 6.6E12 bytes. However, assuming 1000, it can hold 6E12 bytes.



          The difference between the two is 6E11 bytes, or 559GB. Thus, your reported capacity is 559GB less than what you think it should be.






          share|improve this answer


























          • Ok thanks for the reply. So the initial data I installed is gone? I am using full capacity of the drive at it's current state?

            – Toodarday
            Mar 28 at 18:40











          • @Toodarday your data is not gone, although it may be very difficult to recover depending on how much disk I/O has been done since you re-formatted. For the future, please always make backups, especially if you're doing anything potentially dangerous like messing with partitions.

            – Android Dev
            Mar 28 at 18:42













          • Ok thanks for the advice. It was not important data, luckily.

            – Toodarday
            Mar 28 at 18:43











          • @Toodarday that's good :) also, see here for more reading on 1000 vs 1024.

            – Android Dev
            Mar 28 at 18:45
















          1












          1








          1







          This is due to the 1000 vs. 1024 bytes problem.



          You see, assuming 1024, a 6TB drive can hold 6.6E12 bytes. However, assuming 1000, it can hold 6E12 bytes.



          The difference between the two is 6E11 bytes, or 559GB. Thus, your reported capacity is 559GB less than what you think it should be.






          share|improve this answer















          This is due to the 1000 vs. 1024 bytes problem.



          You see, assuming 1024, a 6TB drive can hold 6.6E12 bytes. However, assuming 1000, it can hold 6E12 bytes.



          The difference between the two is 6E11 bytes, or 559GB. Thus, your reported capacity is 559GB less than what you think it should be.







          share|improve this answer














          share|improve this answer



          share|improve this answer








          edited Mar 28 at 18:48

























          answered Mar 28 at 18:36









          Android DevAndroid Dev

          11.1k63462




          11.1k63462













          • Ok thanks for the reply. So the initial data I installed is gone? I am using full capacity of the drive at it's current state?

            – Toodarday
            Mar 28 at 18:40











          • @Toodarday your data is not gone, although it may be very difficult to recover depending on how much disk I/O has been done since you re-formatted. For the future, please always make backups, especially if you're doing anything potentially dangerous like messing with partitions.

            – Android Dev
            Mar 28 at 18:42













          • Ok thanks for the advice. It was not important data, luckily.

            – Toodarday
            Mar 28 at 18:43











          • @Toodarday that's good :) also, see here for more reading on 1000 vs 1024.

            – Android Dev
            Mar 28 at 18:45





















          • Ok thanks for the reply. So the initial data I installed is gone? I am using full capacity of the drive at it's current state?

            – Toodarday
            Mar 28 at 18:40











          • @Toodarday your data is not gone, although it may be very difficult to recover depending on how much disk I/O has been done since you re-formatted. For the future, please always make backups, especially if you're doing anything potentially dangerous like messing with partitions.

            – Android Dev
            Mar 28 at 18:42













          • Ok thanks for the advice. It was not important data, luckily.

            – Toodarday
            Mar 28 at 18:43











          • @Toodarday that's good :) also, see here for more reading on 1000 vs 1024.

            – Android Dev
            Mar 28 at 18:45



















          Ok thanks for the reply. So the initial data I installed is gone? I am using full capacity of the drive at it's current state?

          – Toodarday
          Mar 28 at 18:40





          Ok thanks for the reply. So the initial data I installed is gone? I am using full capacity of the drive at it's current state?

          – Toodarday
          Mar 28 at 18:40













          @Toodarday your data is not gone, although it may be very difficult to recover depending on how much disk I/O has been done since you re-formatted. For the future, please always make backups, especially if you're doing anything potentially dangerous like messing with partitions.

          – Android Dev
          Mar 28 at 18:42







          @Toodarday your data is not gone, although it may be very difficult to recover depending on how much disk I/O has been done since you re-formatted. For the future, please always make backups, especially if you're doing anything potentially dangerous like messing with partitions.

          – Android Dev
          Mar 28 at 18:42















          Ok thanks for the advice. It was not important data, luckily.

          – Toodarday
          Mar 28 at 18:43





          Ok thanks for the advice. It was not important data, luckily.

          – Toodarday
          Mar 28 at 18:43













          @Toodarday that's good :) also, see here for more reading on 1000 vs 1024.

          – Android Dev
          Mar 28 at 18:45







          @Toodarday that's good :) also, see here for more reading on 1000 vs 1024.

          – Android Dev
          Mar 28 at 18:45




















          draft saved

          draft discarded




















































          Thanks for contributing an answer to Ask Ubuntu!


          • Please be sure to answer the question. Provide details and share your research!

          But avoid



          • Asking for help, clarification, or responding to other answers.

          • Making statements based on opinion; back them up with references or personal experience.


          To learn more, see our tips on writing great answers.




          draft saved


          draft discarded














          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1129477%2fgparted-disk-size-smaller-after-creating-partition-table-old-data-gone%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown





















































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown

































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown







          Popular posts from this blog

          數位音樂下載

          When can things happen in Etherscan, such as the picture below?

          格利澤436b