Ubuntu 16.04 USB 3.0 UAS support












0















I am receiving the following failure message from an ICY DOCK HDD disk enclosure:



USB controller 0000:04:00.0 does not support streams, which are required by the UAS driver.


Supposedly the 4.4 kernel supports UAS & UASP so what's happening?



Output of dmesg |grep usb



[ 3554.004547] usb 7-2: reset SuperSpeed USB device number 9 using xhci_hcd
[ 3554.020553] usb 7-2: device firmware changed
[ 3554.020754] usb 7-2: USB disconnect, device number 9
[ 3554.700361] usb 7-2: new SuperSpeed USB device number 10 using xhci_hcd
[ 3554.716781] usb 7-2: New USB device found, idVendor=152d, idProduct=0562
[ 3554.716793] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 3554.716803] usb 7-2: Product: JMS56x Series
[ 3554.716812] usb 7-2: Manufacturer: JMicron
[ 3554.716820] usb 7-2: SerialNumber: RANDOM__E3F4917AD758
[ 3554.717863] usb 7-2: USB controller 0000:04:00.0 does not support streams, which are required by the UAS driver.
[ 3554.717873] usb 7-2: Please try an other USB controller if you wish to use UAS.
[ 3554.717883] usb-storage 7-2:1.0: USB Mass Storage device detected
[ 3554.724157] scsi host10: usb-storage 7-2:1.0
[49029.464801] usb 7-3: new SuperSpeed USB device number 11 using xhci_hcd
[49029.480769] usb 7-3: New USB device found, idVendor=174c, idProduct=55aa
[49029.480782] usb 7-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[49029.480791] usb 7-3: Product: ASMT1051
[49029.480800] usb 7-3: Manufacturer: asmedia
[49029.480808] usb 7-3: SerialNumber: 123456789012
[49029.481716] usb-storage 7-3:1.0: USB Mass Storage device detected
[49029.481907] usb-storage 7-3:1.0: Quirks match for vid 174c pid 55aa: 400000
[49029.481967] scsi host11: usb-storage 7-3:1.0


Output of uname -a



Linux media 4.4.0-57-generic #78-Ubuntu SMP Fri Dec 9 23:50:32 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux


Output of lsusb



Bus 001 Device 006: ID 0a81:0205 Chesen Electronics Corp. PS/2 Keyboard+Mouse Adapter
Bus 001 Device 005: ID 0557:8021 ATEN International Co., Ltd CS1764A [CubiQ DVI KVMP Switch]
Bus 001 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 011: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge
Bus 007 Device 010: ID 152d:0562 JMicron Technology Corp. / JMicron USA Technology Corp.
Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 006 Device 002: ID 2109:0811 VIA Labs, Inc. Hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


Output of lspci -vvv



...
04:00.0 USB controller: VIA Technologies, Inc. VL80x xHCI USB 3.0 Controller (rev 02) (prog-if 30 [XHCI])
Subsystem: VIA Technologies, Inc. VL80x xHCI USB 3.0 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 33
Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd


Output of lsusb -t



/:  Bus 07.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
|__ Port 2: Dev 10, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
|__ Port 3: Dev 11, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 1: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
|__ Port 5: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 4: Dev 5, If 0, Class=Hub, Driver=hub/4p, 12M
|__ Port 1: Dev 6, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 1: Dev 6, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 1: Dev 6, If 2, Class=Human Interface Device, Driver=usbhid, 1.5M


Output of usb-devices



...
T: Bus=07 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 4
D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev=04.04
S: Manufacturer=Linux 4.4.0-57-generic xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:04:00.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=5000 MxCh= 0
D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=152d ProdID=0562 Rev=01.03
S: Manufacturer=JMicron
S: Product=JMS56x Series
S: SerialNumber=RANDOM__E3F4917AD758
C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=8mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

T: Bus=07 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 11 Spd=5000 MxCh= 0
D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=174c ProdID=55aa Rev=01.00
S: Manufacturer=asmedia
S: Product=ASMT1051
S: SerialNumber=123456789012
C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=144mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage









share|improve this question
















bumped to the homepage by Community yesterday


This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.




















    0















    I am receiving the following failure message from an ICY DOCK HDD disk enclosure:



    USB controller 0000:04:00.0 does not support streams, which are required by the UAS driver.


    Supposedly the 4.4 kernel supports UAS & UASP so what's happening?



    Output of dmesg |grep usb



    [ 3554.004547] usb 7-2: reset SuperSpeed USB device number 9 using xhci_hcd
    [ 3554.020553] usb 7-2: device firmware changed
    [ 3554.020754] usb 7-2: USB disconnect, device number 9
    [ 3554.700361] usb 7-2: new SuperSpeed USB device number 10 using xhci_hcd
    [ 3554.716781] usb 7-2: New USB device found, idVendor=152d, idProduct=0562
    [ 3554.716793] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
    [ 3554.716803] usb 7-2: Product: JMS56x Series
    [ 3554.716812] usb 7-2: Manufacturer: JMicron
    [ 3554.716820] usb 7-2: SerialNumber: RANDOM__E3F4917AD758
    [ 3554.717863] usb 7-2: USB controller 0000:04:00.0 does not support streams, which are required by the UAS driver.
    [ 3554.717873] usb 7-2: Please try an other USB controller if you wish to use UAS.
    [ 3554.717883] usb-storage 7-2:1.0: USB Mass Storage device detected
    [ 3554.724157] scsi host10: usb-storage 7-2:1.0
    [49029.464801] usb 7-3: new SuperSpeed USB device number 11 using xhci_hcd
    [49029.480769] usb 7-3: New USB device found, idVendor=174c, idProduct=55aa
    [49029.480782] usb 7-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
    [49029.480791] usb 7-3: Product: ASMT1051
    [49029.480800] usb 7-3: Manufacturer: asmedia
    [49029.480808] usb 7-3: SerialNumber: 123456789012
    [49029.481716] usb-storage 7-3:1.0: USB Mass Storage device detected
    [49029.481907] usb-storage 7-3:1.0: Quirks match for vid 174c pid 55aa: 400000
    [49029.481967] scsi host11: usb-storage 7-3:1.0


    Output of uname -a



    Linux media 4.4.0-57-generic #78-Ubuntu SMP Fri Dec 9 23:50:32 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux


    Output of lsusb



    Bus 001 Device 006: ID 0a81:0205 Chesen Electronics Corp. PS/2 Keyboard+Mouse Adapter
    Bus 001 Device 005: ID 0557:8021 ATEN International Co., Ltd CS1764A [CubiQ DVI KVMP Switch]
    Bus 001 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 005 Device 002: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 007 Device 011: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge
    Bus 007 Device 010: ID 152d:0562 JMicron Technology Corp. / JMicron USA Technology Corp.
    Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 006 Device 002: ID 2109:0811 VIA Labs, Inc. Hub
    Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


    Output of lspci -vvv



    ...
    04:00.0 USB controller: VIA Technologies, Inc. VL80x xHCI USB 3.0 Controller (rev 02) (prog-if 30 [XHCI])
    Subsystem: VIA Technologies, Inc. VL80x xHCI USB 3.0 Controller
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
    Latency: 0, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 33
    Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: <access denied>
    Kernel driver in use: xhci_hcd


    Output of lsusb -t



    /:  Bus 07.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
    |__ Port 2: Dev 10, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
    |__ Port 3: Dev 11, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
    /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
    /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 1: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 1: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
    /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
    |__ Port 5: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
    |__ Port 4: Dev 5, If 0, Class=Hub, Driver=hub/4p, 12M
    |__ Port 1: Dev 6, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
    |__ Port 1: Dev 6, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
    |__ Port 1: Dev 6, If 2, Class=Human Interface Device, Driver=usbhid, 1.5M


    Output of usb-devices



    ...
    T: Bus=07 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 4
    D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
    P: Vendor=1d6b ProdID=0003 Rev=04.04
    S: Manufacturer=Linux 4.4.0-57-generic xhci-hcd
    S: Product=xHCI Host Controller
    S: SerialNumber=0000:04:00.0
    C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

    T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=5000 MxCh= 0
    D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
    P: Vendor=152d ProdID=0562 Rev=01.03
    S: Manufacturer=JMicron
    S: Product=JMS56x Series
    S: SerialNumber=RANDOM__E3F4917AD758
    C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=8mA
    I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

    T: Bus=07 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 11 Spd=5000 MxCh= 0
    D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
    P: Vendor=174c ProdID=55aa Rev=01.00
    S: Manufacturer=asmedia
    S: Product=ASMT1051
    S: SerialNumber=123456789012
    C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=144mA
    I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage









    share|improve this question
















    bumped to the homepage by Community yesterday


    This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.


















      0












      0








      0








      I am receiving the following failure message from an ICY DOCK HDD disk enclosure:



      USB controller 0000:04:00.0 does not support streams, which are required by the UAS driver.


      Supposedly the 4.4 kernel supports UAS & UASP so what's happening?



      Output of dmesg |grep usb



      [ 3554.004547] usb 7-2: reset SuperSpeed USB device number 9 using xhci_hcd
      [ 3554.020553] usb 7-2: device firmware changed
      [ 3554.020754] usb 7-2: USB disconnect, device number 9
      [ 3554.700361] usb 7-2: new SuperSpeed USB device number 10 using xhci_hcd
      [ 3554.716781] usb 7-2: New USB device found, idVendor=152d, idProduct=0562
      [ 3554.716793] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
      [ 3554.716803] usb 7-2: Product: JMS56x Series
      [ 3554.716812] usb 7-2: Manufacturer: JMicron
      [ 3554.716820] usb 7-2: SerialNumber: RANDOM__E3F4917AD758
      [ 3554.717863] usb 7-2: USB controller 0000:04:00.0 does not support streams, which are required by the UAS driver.
      [ 3554.717873] usb 7-2: Please try an other USB controller if you wish to use UAS.
      [ 3554.717883] usb-storage 7-2:1.0: USB Mass Storage device detected
      [ 3554.724157] scsi host10: usb-storage 7-2:1.0
      [49029.464801] usb 7-3: new SuperSpeed USB device number 11 using xhci_hcd
      [49029.480769] usb 7-3: New USB device found, idVendor=174c, idProduct=55aa
      [49029.480782] usb 7-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
      [49029.480791] usb 7-3: Product: ASMT1051
      [49029.480800] usb 7-3: Manufacturer: asmedia
      [49029.480808] usb 7-3: SerialNumber: 123456789012
      [49029.481716] usb-storage 7-3:1.0: USB Mass Storage device detected
      [49029.481907] usb-storage 7-3:1.0: Quirks match for vid 174c pid 55aa: 400000
      [49029.481967] scsi host11: usb-storage 7-3:1.0


      Output of uname -a



      Linux media 4.4.0-57-generic #78-Ubuntu SMP Fri Dec 9 23:50:32 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux


      Output of lsusb



      Bus 001 Device 006: ID 0a81:0205 Chesen Electronics Corp. PS/2 Keyboard+Mouse Adapter
      Bus 001 Device 005: ID 0557:8021 ATEN International Co., Ltd CS1764A [CubiQ DVI KVMP Switch]
      Bus 001 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub
      Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
      Bus 005 Device 002: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth
      Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
      Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
      Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
      Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
      Bus 007 Device 011: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge
      Bus 007 Device 010: ID 152d:0562 JMicron Technology Corp. / JMicron USA Technology Corp.
      Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
      Bus 006 Device 002: ID 2109:0811 VIA Labs, Inc. Hub
      Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


      Output of lspci -vvv



      ...
      04:00.0 USB controller: VIA Technologies, Inc. VL80x xHCI USB 3.0 Controller (rev 02) (prog-if 30 [XHCI])
      Subsystem: VIA Technologies, Inc. VL80x xHCI USB 3.0 Controller
      Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
      Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
      Latency: 0, Cache Line Size: 32 bytes
      Interrupt: pin A routed to IRQ 33
      Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=4K]
      Capabilities: <access denied>
      Kernel driver in use: xhci_hcd


      Output of lsusb -t



      /:  Bus 07.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
      |__ Port 2: Dev 10, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
      |__ Port 3: Dev 11, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
      /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
      |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
      /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
      |__ Port 1: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
      |__ Port 1: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
      /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
      /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
      /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
      /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
      |__ Port 5: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
      |__ Port 4: Dev 5, If 0, Class=Hub, Driver=hub/4p, 12M
      |__ Port 1: Dev 6, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
      |__ Port 1: Dev 6, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
      |__ Port 1: Dev 6, If 2, Class=Human Interface Device, Driver=usbhid, 1.5M


      Output of usb-devices



      ...
      T: Bus=07 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 4
      D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
      P: Vendor=1d6b ProdID=0003 Rev=04.04
      S: Manufacturer=Linux 4.4.0-57-generic xhci-hcd
      S: Product=xHCI Host Controller
      S: SerialNumber=0000:04:00.0
      C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
      I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

      T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=5000 MxCh= 0
      D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
      P: Vendor=152d ProdID=0562 Rev=01.03
      S: Manufacturer=JMicron
      S: Product=JMS56x Series
      S: SerialNumber=RANDOM__E3F4917AD758
      C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=8mA
      I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

      T: Bus=07 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 11 Spd=5000 MxCh= 0
      D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
      P: Vendor=174c ProdID=55aa Rev=01.00
      S: Manufacturer=asmedia
      S: Product=ASMT1051
      S: SerialNumber=123456789012
      C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=144mA
      I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage









      share|improve this question
















      I am receiving the following failure message from an ICY DOCK HDD disk enclosure:



      USB controller 0000:04:00.0 does not support streams, which are required by the UAS driver.


      Supposedly the 4.4 kernel supports UAS & UASP so what's happening?



      Output of dmesg |grep usb



      [ 3554.004547] usb 7-2: reset SuperSpeed USB device number 9 using xhci_hcd
      [ 3554.020553] usb 7-2: device firmware changed
      [ 3554.020754] usb 7-2: USB disconnect, device number 9
      [ 3554.700361] usb 7-2: new SuperSpeed USB device number 10 using xhci_hcd
      [ 3554.716781] usb 7-2: New USB device found, idVendor=152d, idProduct=0562
      [ 3554.716793] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
      [ 3554.716803] usb 7-2: Product: JMS56x Series
      [ 3554.716812] usb 7-2: Manufacturer: JMicron
      [ 3554.716820] usb 7-2: SerialNumber: RANDOM__E3F4917AD758
      [ 3554.717863] usb 7-2: USB controller 0000:04:00.0 does not support streams, which are required by the UAS driver.
      [ 3554.717873] usb 7-2: Please try an other USB controller if you wish to use UAS.
      [ 3554.717883] usb-storage 7-2:1.0: USB Mass Storage device detected
      [ 3554.724157] scsi host10: usb-storage 7-2:1.0
      [49029.464801] usb 7-3: new SuperSpeed USB device number 11 using xhci_hcd
      [49029.480769] usb 7-3: New USB device found, idVendor=174c, idProduct=55aa
      [49029.480782] usb 7-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
      [49029.480791] usb 7-3: Product: ASMT1051
      [49029.480800] usb 7-3: Manufacturer: asmedia
      [49029.480808] usb 7-3: SerialNumber: 123456789012
      [49029.481716] usb-storage 7-3:1.0: USB Mass Storage device detected
      [49029.481907] usb-storage 7-3:1.0: Quirks match for vid 174c pid 55aa: 400000
      [49029.481967] scsi host11: usb-storage 7-3:1.0


      Output of uname -a



      Linux media 4.4.0-57-generic #78-Ubuntu SMP Fri Dec 9 23:50:32 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux


      Output of lsusb



      Bus 001 Device 006: ID 0a81:0205 Chesen Electronics Corp. PS/2 Keyboard+Mouse Adapter
      Bus 001 Device 005: ID 0557:8021 ATEN International Co., Ltd CS1764A [CubiQ DVI KVMP Switch]
      Bus 001 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub
      Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
      Bus 005 Device 002: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth
      Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
      Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
      Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
      Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
      Bus 007 Device 011: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge
      Bus 007 Device 010: ID 152d:0562 JMicron Technology Corp. / JMicron USA Technology Corp.
      Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
      Bus 006 Device 002: ID 2109:0811 VIA Labs, Inc. Hub
      Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


      Output of lspci -vvv



      ...
      04:00.0 USB controller: VIA Technologies, Inc. VL80x xHCI USB 3.0 Controller (rev 02) (prog-if 30 [XHCI])
      Subsystem: VIA Technologies, Inc. VL80x xHCI USB 3.0 Controller
      Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
      Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
      Latency: 0, Cache Line Size: 32 bytes
      Interrupt: pin A routed to IRQ 33
      Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=4K]
      Capabilities: <access denied>
      Kernel driver in use: xhci_hcd


      Output of lsusb -t



      /:  Bus 07.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
      |__ Port 2: Dev 10, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
      |__ Port 3: Dev 11, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
      /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
      |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
      /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
      |__ Port 1: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
      |__ Port 1: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
      /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
      /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
      /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
      /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
      |__ Port 5: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
      |__ Port 4: Dev 5, If 0, Class=Hub, Driver=hub/4p, 12M
      |__ Port 1: Dev 6, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
      |__ Port 1: Dev 6, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
      |__ Port 1: Dev 6, If 2, Class=Human Interface Device, Driver=usbhid, 1.5M


      Output of usb-devices



      ...
      T: Bus=07 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 4
      D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
      P: Vendor=1d6b ProdID=0003 Rev=04.04
      S: Manufacturer=Linux 4.4.0-57-generic xhci-hcd
      S: Product=xHCI Host Controller
      S: SerialNumber=0000:04:00.0
      C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
      I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

      T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=5000 MxCh= 0
      D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
      P: Vendor=152d ProdID=0562 Rev=01.03
      S: Manufacturer=JMicron
      S: Product=JMS56x Series
      S: SerialNumber=RANDOM__E3F4917AD758
      C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=8mA
      I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

      T: Bus=07 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 11 Spd=5000 MxCh= 0
      D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
      P: Vendor=174c ProdID=55aa Rev=01.00
      S: Manufacturer=asmedia
      S: Product=ASMT1051
      S: SerialNumber=123456789012
      C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=144mA
      I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage






      usb






      share|improve this question















      share|improve this question













      share|improve this question




      share|improve this question








      edited Apr 26 '17 at 3:30









      Sumeet Deshmukh

      4,42653071




      4,42653071










      asked Apr 25 '17 at 23:10









      Bryan LiffBryan Liff

      1616




      1616





      bumped to the homepage by Community yesterday


      This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.







      bumped to the homepage by Community yesterday


      This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
























          1 Answer
          1






          active

          oldest

          votes


















          0














          Yes, usb-devices reports Driver=uas on USB3 streaming mode or Driver=usb-storage on USB2. I see you left it connected on the chipset SerialNumber=0000:04:00.0 device and it's indeed registered as Driver=usb-storage USB2 device, named JMicron as device 1 (Cnt=01) on that Bus.



          Verified the Driver= options myself with my Aukey USB3 2.5" SATA enclousure. However, I didn't get your streaming-error in dmesg when connecting it to USB2, but my USB3 driver seems to be xhci_hcd as well.



          My kernel version is 4.4.0-67-generic #88-Ubuntu, under 16.04 x64. (my USB3: Onboard ASRock B85M 1150 : Intel Corporation 8 Series/C220 Series Chipset)



          Sidenote:



          You have a VL800/VL801 PCI-E USB3 card which is PCIE 2.0 capable but only x1 wide and is limited to 250-500 MByte/s, very likely bottlenecking all devices combined on this card. Bear in mind that even when you get this card working, you'd be stuck with that limitation, since the data can't get any faster to other peripherals in your PC.



          You could try another cable (thicker and shorter is usually better) or omit any external USB hub which may be in the signal path. Personally, I'd go with another card (after researching its Linux-friendliness & PCI-E width & extra internal Power Plug to support High Power USB3 delivery).



          Sorry, that's all I got.






          share|improve this answer























            Your Answer








            StackExchange.ready(function() {
            var channelOptions = {
            tags: "".split(" "),
            id: "89"
            };
            initTagRenderer("".split(" "), "".split(" "), channelOptions);

            StackExchange.using("externalEditor", function() {
            // Have to fire editor after snippets, if snippets enabled
            if (StackExchange.settings.snippets.snippetsEnabled) {
            StackExchange.using("snippets", function() {
            createEditor();
            });
            }
            else {
            createEditor();
            }
            });

            function createEditor() {
            StackExchange.prepareEditor({
            heartbeatType: 'answer',
            autoActivateHeartbeat: false,
            convertImagesToLinks: true,
            noModals: true,
            showLowRepImageUploadWarning: true,
            reputationToPostImages: 10,
            bindNavPrevention: true,
            postfix: "",
            imageUploader: {
            brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
            contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
            allowUrls: true
            },
            onDemand: true,
            discardSelector: ".discard-answer"
            ,immediatelyShowMarkdownHelp:true
            });


            }
            });














            draft saved

            draft discarded


















            StackExchange.ready(
            function () {
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f908934%2fubuntu-16-04-usb-3-0-uas-support%23new-answer', 'question_page');
            }
            );

            Post as a guest















            Required, but never shown

























            1 Answer
            1






            active

            oldest

            votes








            1 Answer
            1






            active

            oldest

            votes









            active

            oldest

            votes






            active

            oldest

            votes









            0














            Yes, usb-devices reports Driver=uas on USB3 streaming mode or Driver=usb-storage on USB2. I see you left it connected on the chipset SerialNumber=0000:04:00.0 device and it's indeed registered as Driver=usb-storage USB2 device, named JMicron as device 1 (Cnt=01) on that Bus.



            Verified the Driver= options myself with my Aukey USB3 2.5" SATA enclousure. However, I didn't get your streaming-error in dmesg when connecting it to USB2, but my USB3 driver seems to be xhci_hcd as well.



            My kernel version is 4.4.0-67-generic #88-Ubuntu, under 16.04 x64. (my USB3: Onboard ASRock B85M 1150 : Intel Corporation 8 Series/C220 Series Chipset)



            Sidenote:



            You have a VL800/VL801 PCI-E USB3 card which is PCIE 2.0 capable but only x1 wide and is limited to 250-500 MByte/s, very likely bottlenecking all devices combined on this card. Bear in mind that even when you get this card working, you'd be stuck with that limitation, since the data can't get any faster to other peripherals in your PC.



            You could try another cable (thicker and shorter is usually better) or omit any external USB hub which may be in the signal path. Personally, I'd go with another card (after researching its Linux-friendliness & PCI-E width & extra internal Power Plug to support High Power USB3 delivery).



            Sorry, that's all I got.






            share|improve this answer




























              0














              Yes, usb-devices reports Driver=uas on USB3 streaming mode or Driver=usb-storage on USB2. I see you left it connected on the chipset SerialNumber=0000:04:00.0 device and it's indeed registered as Driver=usb-storage USB2 device, named JMicron as device 1 (Cnt=01) on that Bus.



              Verified the Driver= options myself with my Aukey USB3 2.5" SATA enclousure. However, I didn't get your streaming-error in dmesg when connecting it to USB2, but my USB3 driver seems to be xhci_hcd as well.



              My kernel version is 4.4.0-67-generic #88-Ubuntu, under 16.04 x64. (my USB3: Onboard ASRock B85M 1150 : Intel Corporation 8 Series/C220 Series Chipset)



              Sidenote:



              You have a VL800/VL801 PCI-E USB3 card which is PCIE 2.0 capable but only x1 wide and is limited to 250-500 MByte/s, very likely bottlenecking all devices combined on this card. Bear in mind that even when you get this card working, you'd be stuck with that limitation, since the data can't get any faster to other peripherals in your PC.



              You could try another cable (thicker and shorter is usually better) or omit any external USB hub which may be in the signal path. Personally, I'd go with another card (after researching its Linux-friendliness & PCI-E width & extra internal Power Plug to support High Power USB3 delivery).



              Sorry, that's all I got.






              share|improve this answer


























                0












                0








                0







                Yes, usb-devices reports Driver=uas on USB3 streaming mode or Driver=usb-storage on USB2. I see you left it connected on the chipset SerialNumber=0000:04:00.0 device and it's indeed registered as Driver=usb-storage USB2 device, named JMicron as device 1 (Cnt=01) on that Bus.



                Verified the Driver= options myself with my Aukey USB3 2.5" SATA enclousure. However, I didn't get your streaming-error in dmesg when connecting it to USB2, but my USB3 driver seems to be xhci_hcd as well.



                My kernel version is 4.4.0-67-generic #88-Ubuntu, under 16.04 x64. (my USB3: Onboard ASRock B85M 1150 : Intel Corporation 8 Series/C220 Series Chipset)



                Sidenote:



                You have a VL800/VL801 PCI-E USB3 card which is PCIE 2.0 capable but only x1 wide and is limited to 250-500 MByte/s, very likely bottlenecking all devices combined on this card. Bear in mind that even when you get this card working, you'd be stuck with that limitation, since the data can't get any faster to other peripherals in your PC.



                You could try another cable (thicker and shorter is usually better) or omit any external USB hub which may be in the signal path. Personally, I'd go with another card (after researching its Linux-friendliness & PCI-E width & extra internal Power Plug to support High Power USB3 delivery).



                Sorry, that's all I got.






                share|improve this answer













                Yes, usb-devices reports Driver=uas on USB3 streaming mode or Driver=usb-storage on USB2. I see you left it connected on the chipset SerialNumber=0000:04:00.0 device and it's indeed registered as Driver=usb-storage USB2 device, named JMicron as device 1 (Cnt=01) on that Bus.



                Verified the Driver= options myself with my Aukey USB3 2.5" SATA enclousure. However, I didn't get your streaming-error in dmesg when connecting it to USB2, but my USB3 driver seems to be xhci_hcd as well.



                My kernel version is 4.4.0-67-generic #88-Ubuntu, under 16.04 x64. (my USB3: Onboard ASRock B85M 1150 : Intel Corporation 8 Series/C220 Series Chipset)



                Sidenote:



                You have a VL800/VL801 PCI-E USB3 card which is PCIE 2.0 capable but only x1 wide and is limited to 250-500 MByte/s, very likely bottlenecking all devices combined on this card. Bear in mind that even when you get this card working, you'd be stuck with that limitation, since the data can't get any faster to other peripherals in your PC.



                You could try another cable (thicker and shorter is usually better) or omit any external USB hub which may be in the signal path. Personally, I'd go with another card (after researching its Linux-friendliness & PCI-E width & extra internal Power Plug to support High Power USB3 delivery).



                Sorry, that's all I got.







                share|improve this answer












                share|improve this answer



                share|improve this answer










                answered Aug 16 '17 at 16:05









                hirschhirsch

                539




                539






























                    draft saved

                    draft discarded




















































                    Thanks for contributing an answer to Ask Ubuntu!


                    • Please be sure to answer the question. Provide details and share your research!

                    But avoid



                    • Asking for help, clarification, or responding to other answers.

                    • Making statements based on opinion; back them up with references or personal experience.


                    To learn more, see our tips on writing great answers.




                    draft saved


                    draft discarded














                    StackExchange.ready(
                    function () {
                    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f908934%2fubuntu-16-04-usb-3-0-uas-support%23new-answer', 'question_page');
                    }
                    );

                    Post as a guest















                    Required, but never shown





















































                    Required, but never shown














                    Required, but never shown












                    Required, but never shown







                    Required, but never shown

































                    Required, but never shown














                    Required, but never shown












                    Required, but never shown







                    Required, but never shown







                    Popular posts from this blog

                    數位音樂下載

                    When can things happen in Etherscan, such as the picture below?

                    格利澤436b