Set drawing in TikZ
up vote
4
down vote
favorite
In the next code, I display the contents of two sets A
and B
respectively, and the arrows that determine the mapping between their elements...
What is left, is to draw the two sets (namely, two ellipses - one in the left that encloses ai
's and xi
's and one in the right that encloses the bi
's and the yi
's). The names of the two sets A
and B
have to be displayed after the bottom of the two ellipses. How can I do this?
documentclass[a4paper,twoside,10pt]{book}
usepackage {tikz}
usetikzlibrary {positioning,graphs,calc,decorations.pathmorphing,shapes,arrows.meta,arrows,shapes.misc}
usepackage{tikz-cd}
usepackage{greektex}
usepackage[american,greek,greek.polytoniko]{babel}
begin{document}
begin{center}
tikzset{every loop/.style={min distance=15mm,looseness=10}}
begin{tikzpicture}[-latex ,auto ,node distance =0.7cm and 5cm, on grid,semithick ,
state/.style ={circle, draw, color=blue , fill=blue, text=white , minimum width =0.2 cm}]
node[state] (a1) [label=left:$alpha_1$]{};
node[state] (a2) [below =of a1][label=left:$alpha_2$]{};
node[state] (a3) [below =of a2][label=left:$alpha_3$]{};
node[state] (adots) [below =of a3][label=left:$vdots$]{};
node[state] (an) [below =of adots][label=left:$alpha_n$]{};
node[state] (b1) [right =of a1][label=right:$beta_1$]{};
node[state] (b2) [below =of b1][label=right:$beta_2$]{};
node[state] (b3) [below =of b2][label=right:$beta_3$]{};
node[state] (bdots) [below =of b3][label=right:$vdots$]{};
node[state] (bn) [below =of bdots][label=right:$beta_n$]{};
node[state] (x1) [below =of an,yshift=-0.5cm][label=left:$x_1$]{};
node[state] (x2) [below =of x1][label=left:$x_2$]{};
node[state] (x3) [below =of x2][label=left:$x_3$]{};
node[state] (xdots) [below =of x3][label=left:$vdots$]{};
node[state] (xn) [below =of xdots][label=left:$x_n$]{};
node[state] (y1) [below =of bn,yshift=-0.5cm][label=right:$y_1$]{};
node[state] (y2) [below =of y1][label=right:$y_2$]{};
node[state] (y3) [below =of y2][label=right:$y_3$]{};
node[state] (ydots) [below =of y3][label=right:$vdots$]{};
node[state] (yn) [below =of ydots][label=right:$y_n$]{};
path [dashed] (a1) edge (b1); path [dashed] (b2) edge (a2);
path [dashed] (b3) edge (a3); path [dashed] (an) edge (bn);
path (x1) edge (y1); path (y2) edge (x2);
path (y3) edge (x3); path (xn) edge (yn);
end{tikzpicture}
end{center}
end{document}
tikz-pgf
add a comment |
up vote
4
down vote
favorite
In the next code, I display the contents of two sets A
and B
respectively, and the arrows that determine the mapping between their elements...
What is left, is to draw the two sets (namely, two ellipses - one in the left that encloses ai
's and xi
's and one in the right that encloses the bi
's and the yi
's). The names of the two sets A
and B
have to be displayed after the bottom of the two ellipses. How can I do this?
documentclass[a4paper,twoside,10pt]{book}
usepackage {tikz}
usetikzlibrary {positioning,graphs,calc,decorations.pathmorphing,shapes,arrows.meta,arrows,shapes.misc}
usepackage{tikz-cd}
usepackage{greektex}
usepackage[american,greek,greek.polytoniko]{babel}
begin{document}
begin{center}
tikzset{every loop/.style={min distance=15mm,looseness=10}}
begin{tikzpicture}[-latex ,auto ,node distance =0.7cm and 5cm, on grid,semithick ,
state/.style ={circle, draw, color=blue , fill=blue, text=white , minimum width =0.2 cm}]
node[state] (a1) [label=left:$alpha_1$]{};
node[state] (a2) [below =of a1][label=left:$alpha_2$]{};
node[state] (a3) [below =of a2][label=left:$alpha_3$]{};
node[state] (adots) [below =of a3][label=left:$vdots$]{};
node[state] (an) [below =of adots][label=left:$alpha_n$]{};
node[state] (b1) [right =of a1][label=right:$beta_1$]{};
node[state] (b2) [below =of b1][label=right:$beta_2$]{};
node[state] (b3) [below =of b2][label=right:$beta_3$]{};
node[state] (bdots) [below =of b3][label=right:$vdots$]{};
node[state] (bn) [below =of bdots][label=right:$beta_n$]{};
node[state] (x1) [below =of an,yshift=-0.5cm][label=left:$x_1$]{};
node[state] (x2) [below =of x1][label=left:$x_2$]{};
node[state] (x3) [below =of x2][label=left:$x_3$]{};
node[state] (xdots) [below =of x3][label=left:$vdots$]{};
node[state] (xn) [below =of xdots][label=left:$x_n$]{};
node[state] (y1) [below =of bn,yshift=-0.5cm][label=right:$y_1$]{};
node[state] (y2) [below =of y1][label=right:$y_2$]{};
node[state] (y3) [below =of y2][label=right:$y_3$]{};
node[state] (ydots) [below =of y3][label=right:$vdots$]{};
node[state] (yn) [below =of ydots][label=right:$y_n$]{};
path [dashed] (a1) edge (b1); path [dashed] (b2) edge (a2);
path [dashed] (b3) edge (a3); path [dashed] (an) edge (bn);
path (x1) edge (y1); path (y2) edge (x2);
path (y3) edge (x3); path (xn) edge (yn);
end{tikzpicture}
end{center}
end{document}
tikz-pgf
add a comment |
up vote
4
down vote
favorite
up vote
4
down vote
favorite
In the next code, I display the contents of two sets A
and B
respectively, and the arrows that determine the mapping between their elements...
What is left, is to draw the two sets (namely, two ellipses - one in the left that encloses ai
's and xi
's and one in the right that encloses the bi
's and the yi
's). The names of the two sets A
and B
have to be displayed after the bottom of the two ellipses. How can I do this?
documentclass[a4paper,twoside,10pt]{book}
usepackage {tikz}
usetikzlibrary {positioning,graphs,calc,decorations.pathmorphing,shapes,arrows.meta,arrows,shapes.misc}
usepackage{tikz-cd}
usepackage{greektex}
usepackage[american,greek,greek.polytoniko]{babel}
begin{document}
begin{center}
tikzset{every loop/.style={min distance=15mm,looseness=10}}
begin{tikzpicture}[-latex ,auto ,node distance =0.7cm and 5cm, on grid,semithick ,
state/.style ={circle, draw, color=blue , fill=blue, text=white , minimum width =0.2 cm}]
node[state] (a1) [label=left:$alpha_1$]{};
node[state] (a2) [below =of a1][label=left:$alpha_2$]{};
node[state] (a3) [below =of a2][label=left:$alpha_3$]{};
node[state] (adots) [below =of a3][label=left:$vdots$]{};
node[state] (an) [below =of adots][label=left:$alpha_n$]{};
node[state] (b1) [right =of a1][label=right:$beta_1$]{};
node[state] (b2) [below =of b1][label=right:$beta_2$]{};
node[state] (b3) [below =of b2][label=right:$beta_3$]{};
node[state] (bdots) [below =of b3][label=right:$vdots$]{};
node[state] (bn) [below =of bdots][label=right:$beta_n$]{};
node[state] (x1) [below =of an,yshift=-0.5cm][label=left:$x_1$]{};
node[state] (x2) [below =of x1][label=left:$x_2$]{};
node[state] (x3) [below =of x2][label=left:$x_3$]{};
node[state] (xdots) [below =of x3][label=left:$vdots$]{};
node[state] (xn) [below =of xdots][label=left:$x_n$]{};
node[state] (y1) [below =of bn,yshift=-0.5cm][label=right:$y_1$]{};
node[state] (y2) [below =of y1][label=right:$y_2$]{};
node[state] (y3) [below =of y2][label=right:$y_3$]{};
node[state] (ydots) [below =of y3][label=right:$vdots$]{};
node[state] (yn) [below =of ydots][label=right:$y_n$]{};
path [dashed] (a1) edge (b1); path [dashed] (b2) edge (a2);
path [dashed] (b3) edge (a3); path [dashed] (an) edge (bn);
path (x1) edge (y1); path (y2) edge (x2);
path (y3) edge (x3); path (xn) edge (yn);
end{tikzpicture}
end{center}
end{document}
tikz-pgf
In the next code, I display the contents of two sets A
and B
respectively, and the arrows that determine the mapping between their elements...
What is left, is to draw the two sets (namely, two ellipses - one in the left that encloses ai
's and xi
's and one in the right that encloses the bi
's and the yi
's). The names of the two sets A
and B
have to be displayed after the bottom of the two ellipses. How can I do this?
documentclass[a4paper,twoside,10pt]{book}
usepackage {tikz}
usetikzlibrary {positioning,graphs,calc,decorations.pathmorphing,shapes,arrows.meta,arrows,shapes.misc}
usepackage{tikz-cd}
usepackage{greektex}
usepackage[american,greek,greek.polytoniko]{babel}
begin{document}
begin{center}
tikzset{every loop/.style={min distance=15mm,looseness=10}}
begin{tikzpicture}[-latex ,auto ,node distance =0.7cm and 5cm, on grid,semithick ,
state/.style ={circle, draw, color=blue , fill=blue, text=white , minimum width =0.2 cm}]
node[state] (a1) [label=left:$alpha_1$]{};
node[state] (a2) [below =of a1][label=left:$alpha_2$]{};
node[state] (a3) [below =of a2][label=left:$alpha_3$]{};
node[state] (adots) [below =of a3][label=left:$vdots$]{};
node[state] (an) [below =of adots][label=left:$alpha_n$]{};
node[state] (b1) [right =of a1][label=right:$beta_1$]{};
node[state] (b2) [below =of b1][label=right:$beta_2$]{};
node[state] (b3) [below =of b2][label=right:$beta_3$]{};
node[state] (bdots) [below =of b3][label=right:$vdots$]{};
node[state] (bn) [below =of bdots][label=right:$beta_n$]{};
node[state] (x1) [below =of an,yshift=-0.5cm][label=left:$x_1$]{};
node[state] (x2) [below =of x1][label=left:$x_2$]{};
node[state] (x3) [below =of x2][label=left:$x_3$]{};
node[state] (xdots) [below =of x3][label=left:$vdots$]{};
node[state] (xn) [below =of xdots][label=left:$x_n$]{};
node[state] (y1) [below =of bn,yshift=-0.5cm][label=right:$y_1$]{};
node[state] (y2) [below =of y1][label=right:$y_2$]{};
node[state] (y3) [below =of y2][label=right:$y_3$]{};
node[state] (ydots) [below =of y3][label=right:$vdots$]{};
node[state] (yn) [below =of ydots][label=right:$y_n$]{};
path [dashed] (a1) edge (b1); path [dashed] (b2) edge (a2);
path [dashed] (b3) edge (a3); path [dashed] (an) edge (bn);
path (x1) edge (y1); path (y2) edge (x2);
path (y3) edge (x3); path (xn) edge (yn);
end{tikzpicture}
end{center}
end{document}
tikz-pgf
tikz-pgf
edited 2 days ago
Dũng Vũ
1,05018
1,05018
asked 2 days ago
Athanasios Margaris
31029
31029
add a comment |
add a comment |
2 Answers
2
active
oldest
votes
up vote
5
down vote
accepted
In addition to @DungVu's answer, it is possible to use the fit
library, which allows you to create a node that includes all the others. Here, as they are aligned, you just have to include one from above and below.
I chose the second (a2)
and second last (xdots)
to have a prettier ellipse for my taste.
node[fit={(a2)(xdots)},draw, ellipse,minimum width=3cm](left){};
documentclass[a4paper,twoside,10pt]{book}
usepackage {tikz}
usetikzlibrary {positioning,graphs,calc,decorations.pathmorphing,shapes,arrows.meta,arrows,shapes.misc}
usetikzlibrary{fit}
%usepackage{tikz-cd}
%usepackage{greektex}
%usepackage[american,greek,greek.polytoniko]{babel}
begin{document}
begin{center}
tikzset{every loop/.style={min distance=15mm,looseness=10}}
begin{tikzpicture}[-latex ,auto ,node distance =0.7cm and 5cm, on grid,semithick ,
state/.style ={circle, draw, color=blue , fill=blue, text=white , minimum width =0.2 cm}]
node[state] (a1) [label=left:$alpha_1$]{};
node[state] (a2) [below =of a1][label=left:$alpha_2$]{};
node[state] (a3) [below =of a2][label=left:$alpha_3$]{};
node[state] (adots) [below =of a3][label=left:$vdots$]{};
node[state] (an) [below =of adots][label=left:$alpha_n$]{};
node[state] (x1) [below =of an,yshift=-0.5cm][label=left:$x_1$]{};
node[state] (x2) [below =of x1][label=left:$x_2$]{};
node[state] (x3) [below =of x2][label=left:$x_3$]{};
node[state] (xdots) [below =of x3][label=left:$vdots$]{};
node[state] (xn) [below =of xdots][label=left:$x_n$]{};
% left ellipse
node[fit={(a2)(xdots)},draw, ellipse,minimum width=3cm](left){};
node[state] (b1) [right =of a1][label=right:$beta_1$]{};
node[state] (b2) [below =of b1][label=right:$beta_2$]{};
node[state] (b3) [below =of b2][label=right:$beta_3$]{};
node[state] (bdots) [below =of b3][label=right:$vdots$]{};
node[state] (bn) [below =of bdots][label=right:$beta_n$]{};
node[state] (y1) [below =of bn,yshift=-0.5cm][label=right:$y_1$]{};
node[state] (y2) [below =of y1][label=right:$y_2$]{};
node[state] (y3) [below =of y2][label=right:$y_3$]{};
node[state] (ydots) [below =of y3][label=right:$vdots$]{};
node[state] (yn) [below =of ydots][label=right:$y_n$]{};
% right ellipse
node[fit={(b2)(ydots)},draw, ellipse,minimum width=3cm](right){};
path [dashed] (a1) edge (b1); path [dashed] (b2) edge (a2);
path [dashed] (b3) edge (a3); path [dashed] (an) edge (bn);
path (x1) edge (y1); path (y2) edge (x2);
path (y3) edge (x3); path (xn) edge (yn);
end{tikzpicture}
end{center}
end{document}
1
Yes, the ellipses look much more beautiful than mine :)
– Dũng Vũ
2 days ago
add a comment |
up vote
4
down vote
Add
draw ($(an)+(0cm,-0.55cm)$) ellipse ({1.5cm} and {4cm});
draw ($(bn)+(0cm,-0.55cm)$) ellipse ({1.5cm} and {4cm});
% begin{large}
draw[color=white] ($(xn)+(0,-1cm)$) node {color{black}$A$};
draw[color=white] ($(yn)+(0,-1cm)$) node {color{black}$B$};
%end{large}
to your TikZ drawing code.
You can of course change the numbers in the ellipse-drawing commands if you see that the ellipses are not good enough.
Hope this will help you!
Yes, this works fine . thanks !
– Athanasios Margaris
2 days ago
add a comment |
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
5
down vote
accepted
In addition to @DungVu's answer, it is possible to use the fit
library, which allows you to create a node that includes all the others. Here, as they are aligned, you just have to include one from above and below.
I chose the second (a2)
and second last (xdots)
to have a prettier ellipse for my taste.
node[fit={(a2)(xdots)},draw, ellipse,minimum width=3cm](left){};
documentclass[a4paper,twoside,10pt]{book}
usepackage {tikz}
usetikzlibrary {positioning,graphs,calc,decorations.pathmorphing,shapes,arrows.meta,arrows,shapes.misc}
usetikzlibrary{fit}
%usepackage{tikz-cd}
%usepackage{greektex}
%usepackage[american,greek,greek.polytoniko]{babel}
begin{document}
begin{center}
tikzset{every loop/.style={min distance=15mm,looseness=10}}
begin{tikzpicture}[-latex ,auto ,node distance =0.7cm and 5cm, on grid,semithick ,
state/.style ={circle, draw, color=blue , fill=blue, text=white , minimum width =0.2 cm}]
node[state] (a1) [label=left:$alpha_1$]{};
node[state] (a2) [below =of a1][label=left:$alpha_2$]{};
node[state] (a3) [below =of a2][label=left:$alpha_3$]{};
node[state] (adots) [below =of a3][label=left:$vdots$]{};
node[state] (an) [below =of adots][label=left:$alpha_n$]{};
node[state] (x1) [below =of an,yshift=-0.5cm][label=left:$x_1$]{};
node[state] (x2) [below =of x1][label=left:$x_2$]{};
node[state] (x3) [below =of x2][label=left:$x_3$]{};
node[state] (xdots) [below =of x3][label=left:$vdots$]{};
node[state] (xn) [below =of xdots][label=left:$x_n$]{};
% left ellipse
node[fit={(a2)(xdots)},draw, ellipse,minimum width=3cm](left){};
node[state] (b1) [right =of a1][label=right:$beta_1$]{};
node[state] (b2) [below =of b1][label=right:$beta_2$]{};
node[state] (b3) [below =of b2][label=right:$beta_3$]{};
node[state] (bdots) [below =of b3][label=right:$vdots$]{};
node[state] (bn) [below =of bdots][label=right:$beta_n$]{};
node[state] (y1) [below =of bn,yshift=-0.5cm][label=right:$y_1$]{};
node[state] (y2) [below =of y1][label=right:$y_2$]{};
node[state] (y3) [below =of y2][label=right:$y_3$]{};
node[state] (ydots) [below =of y3][label=right:$vdots$]{};
node[state] (yn) [below =of ydots][label=right:$y_n$]{};
% right ellipse
node[fit={(b2)(ydots)},draw, ellipse,minimum width=3cm](right){};
path [dashed] (a1) edge (b1); path [dashed] (b2) edge (a2);
path [dashed] (b3) edge (a3); path [dashed] (an) edge (bn);
path (x1) edge (y1); path (y2) edge (x2);
path (y3) edge (x3); path (xn) edge (yn);
end{tikzpicture}
end{center}
end{document}
1
Yes, the ellipses look much more beautiful than mine :)
– Dũng Vũ
2 days ago
add a comment |
up vote
5
down vote
accepted
In addition to @DungVu's answer, it is possible to use the fit
library, which allows you to create a node that includes all the others. Here, as they are aligned, you just have to include one from above and below.
I chose the second (a2)
and second last (xdots)
to have a prettier ellipse for my taste.
node[fit={(a2)(xdots)},draw, ellipse,minimum width=3cm](left){};
documentclass[a4paper,twoside,10pt]{book}
usepackage {tikz}
usetikzlibrary {positioning,graphs,calc,decorations.pathmorphing,shapes,arrows.meta,arrows,shapes.misc}
usetikzlibrary{fit}
%usepackage{tikz-cd}
%usepackage{greektex}
%usepackage[american,greek,greek.polytoniko]{babel}
begin{document}
begin{center}
tikzset{every loop/.style={min distance=15mm,looseness=10}}
begin{tikzpicture}[-latex ,auto ,node distance =0.7cm and 5cm, on grid,semithick ,
state/.style ={circle, draw, color=blue , fill=blue, text=white , minimum width =0.2 cm}]
node[state] (a1) [label=left:$alpha_1$]{};
node[state] (a2) [below =of a1][label=left:$alpha_2$]{};
node[state] (a3) [below =of a2][label=left:$alpha_3$]{};
node[state] (adots) [below =of a3][label=left:$vdots$]{};
node[state] (an) [below =of adots][label=left:$alpha_n$]{};
node[state] (x1) [below =of an,yshift=-0.5cm][label=left:$x_1$]{};
node[state] (x2) [below =of x1][label=left:$x_2$]{};
node[state] (x3) [below =of x2][label=left:$x_3$]{};
node[state] (xdots) [below =of x3][label=left:$vdots$]{};
node[state] (xn) [below =of xdots][label=left:$x_n$]{};
% left ellipse
node[fit={(a2)(xdots)},draw, ellipse,minimum width=3cm](left){};
node[state] (b1) [right =of a1][label=right:$beta_1$]{};
node[state] (b2) [below =of b1][label=right:$beta_2$]{};
node[state] (b3) [below =of b2][label=right:$beta_3$]{};
node[state] (bdots) [below =of b3][label=right:$vdots$]{};
node[state] (bn) [below =of bdots][label=right:$beta_n$]{};
node[state] (y1) [below =of bn,yshift=-0.5cm][label=right:$y_1$]{};
node[state] (y2) [below =of y1][label=right:$y_2$]{};
node[state] (y3) [below =of y2][label=right:$y_3$]{};
node[state] (ydots) [below =of y3][label=right:$vdots$]{};
node[state] (yn) [below =of ydots][label=right:$y_n$]{};
% right ellipse
node[fit={(b2)(ydots)},draw, ellipse,minimum width=3cm](right){};
path [dashed] (a1) edge (b1); path [dashed] (b2) edge (a2);
path [dashed] (b3) edge (a3); path [dashed] (an) edge (bn);
path (x1) edge (y1); path (y2) edge (x2);
path (y3) edge (x3); path (xn) edge (yn);
end{tikzpicture}
end{center}
end{document}
1
Yes, the ellipses look much more beautiful than mine :)
– Dũng Vũ
2 days ago
add a comment |
up vote
5
down vote
accepted
up vote
5
down vote
accepted
In addition to @DungVu's answer, it is possible to use the fit
library, which allows you to create a node that includes all the others. Here, as they are aligned, you just have to include one from above and below.
I chose the second (a2)
and second last (xdots)
to have a prettier ellipse for my taste.
node[fit={(a2)(xdots)},draw, ellipse,minimum width=3cm](left){};
documentclass[a4paper,twoside,10pt]{book}
usepackage {tikz}
usetikzlibrary {positioning,graphs,calc,decorations.pathmorphing,shapes,arrows.meta,arrows,shapes.misc}
usetikzlibrary{fit}
%usepackage{tikz-cd}
%usepackage{greektex}
%usepackage[american,greek,greek.polytoniko]{babel}
begin{document}
begin{center}
tikzset{every loop/.style={min distance=15mm,looseness=10}}
begin{tikzpicture}[-latex ,auto ,node distance =0.7cm and 5cm, on grid,semithick ,
state/.style ={circle, draw, color=blue , fill=blue, text=white , minimum width =0.2 cm}]
node[state] (a1) [label=left:$alpha_1$]{};
node[state] (a2) [below =of a1][label=left:$alpha_2$]{};
node[state] (a3) [below =of a2][label=left:$alpha_3$]{};
node[state] (adots) [below =of a3][label=left:$vdots$]{};
node[state] (an) [below =of adots][label=left:$alpha_n$]{};
node[state] (x1) [below =of an,yshift=-0.5cm][label=left:$x_1$]{};
node[state] (x2) [below =of x1][label=left:$x_2$]{};
node[state] (x3) [below =of x2][label=left:$x_3$]{};
node[state] (xdots) [below =of x3][label=left:$vdots$]{};
node[state] (xn) [below =of xdots][label=left:$x_n$]{};
% left ellipse
node[fit={(a2)(xdots)},draw, ellipse,minimum width=3cm](left){};
node[state] (b1) [right =of a1][label=right:$beta_1$]{};
node[state] (b2) [below =of b1][label=right:$beta_2$]{};
node[state] (b3) [below =of b2][label=right:$beta_3$]{};
node[state] (bdots) [below =of b3][label=right:$vdots$]{};
node[state] (bn) [below =of bdots][label=right:$beta_n$]{};
node[state] (y1) [below =of bn,yshift=-0.5cm][label=right:$y_1$]{};
node[state] (y2) [below =of y1][label=right:$y_2$]{};
node[state] (y3) [below =of y2][label=right:$y_3$]{};
node[state] (ydots) [below =of y3][label=right:$vdots$]{};
node[state] (yn) [below =of ydots][label=right:$y_n$]{};
% right ellipse
node[fit={(b2)(ydots)},draw, ellipse,minimum width=3cm](right){};
path [dashed] (a1) edge (b1); path [dashed] (b2) edge (a2);
path [dashed] (b3) edge (a3); path [dashed] (an) edge (bn);
path (x1) edge (y1); path (y2) edge (x2);
path (y3) edge (x3); path (xn) edge (yn);
end{tikzpicture}
end{center}
end{document}
In addition to @DungVu's answer, it is possible to use the fit
library, which allows you to create a node that includes all the others. Here, as they are aligned, you just have to include one from above and below.
I chose the second (a2)
and second last (xdots)
to have a prettier ellipse for my taste.
node[fit={(a2)(xdots)},draw, ellipse,minimum width=3cm](left){};
documentclass[a4paper,twoside,10pt]{book}
usepackage {tikz}
usetikzlibrary {positioning,graphs,calc,decorations.pathmorphing,shapes,arrows.meta,arrows,shapes.misc}
usetikzlibrary{fit}
%usepackage{tikz-cd}
%usepackage{greektex}
%usepackage[american,greek,greek.polytoniko]{babel}
begin{document}
begin{center}
tikzset{every loop/.style={min distance=15mm,looseness=10}}
begin{tikzpicture}[-latex ,auto ,node distance =0.7cm and 5cm, on grid,semithick ,
state/.style ={circle, draw, color=blue , fill=blue, text=white , minimum width =0.2 cm}]
node[state] (a1) [label=left:$alpha_1$]{};
node[state] (a2) [below =of a1][label=left:$alpha_2$]{};
node[state] (a3) [below =of a2][label=left:$alpha_3$]{};
node[state] (adots) [below =of a3][label=left:$vdots$]{};
node[state] (an) [below =of adots][label=left:$alpha_n$]{};
node[state] (x1) [below =of an,yshift=-0.5cm][label=left:$x_1$]{};
node[state] (x2) [below =of x1][label=left:$x_2$]{};
node[state] (x3) [below =of x2][label=left:$x_3$]{};
node[state] (xdots) [below =of x3][label=left:$vdots$]{};
node[state] (xn) [below =of xdots][label=left:$x_n$]{};
% left ellipse
node[fit={(a2)(xdots)},draw, ellipse,minimum width=3cm](left){};
node[state] (b1) [right =of a1][label=right:$beta_1$]{};
node[state] (b2) [below =of b1][label=right:$beta_2$]{};
node[state] (b3) [below =of b2][label=right:$beta_3$]{};
node[state] (bdots) [below =of b3][label=right:$vdots$]{};
node[state] (bn) [below =of bdots][label=right:$beta_n$]{};
node[state] (y1) [below =of bn,yshift=-0.5cm][label=right:$y_1$]{};
node[state] (y2) [below =of y1][label=right:$y_2$]{};
node[state] (y3) [below =of y2][label=right:$y_3$]{};
node[state] (ydots) [below =of y3][label=right:$vdots$]{};
node[state] (yn) [below =of ydots][label=right:$y_n$]{};
% right ellipse
node[fit={(b2)(ydots)},draw, ellipse,minimum width=3cm](right){};
path [dashed] (a1) edge (b1); path [dashed] (b2) edge (a2);
path [dashed] (b3) edge (a3); path [dashed] (an) edge (bn);
path (x1) edge (y1); path (y2) edge (x2);
path (y3) edge (x3); path (xn) edge (yn);
end{tikzpicture}
end{center}
end{document}
answered 2 days ago
AndréC
5,7921937
5,7921937
1
Yes, the ellipses look much more beautiful than mine :)
– Dũng Vũ
2 days ago
add a comment |
1
Yes, the ellipses look much more beautiful than mine :)
– Dũng Vũ
2 days ago
1
1
Yes, the ellipses look much more beautiful than mine :)
– Dũng Vũ
2 days ago
Yes, the ellipses look much more beautiful than mine :)
– Dũng Vũ
2 days ago
add a comment |
up vote
4
down vote
Add
draw ($(an)+(0cm,-0.55cm)$) ellipse ({1.5cm} and {4cm});
draw ($(bn)+(0cm,-0.55cm)$) ellipse ({1.5cm} and {4cm});
% begin{large}
draw[color=white] ($(xn)+(0,-1cm)$) node {color{black}$A$};
draw[color=white] ($(yn)+(0,-1cm)$) node {color{black}$B$};
%end{large}
to your TikZ drawing code.
You can of course change the numbers in the ellipse-drawing commands if you see that the ellipses are not good enough.
Hope this will help you!
Yes, this works fine . thanks !
– Athanasios Margaris
2 days ago
add a comment |
up vote
4
down vote
Add
draw ($(an)+(0cm,-0.55cm)$) ellipse ({1.5cm} and {4cm});
draw ($(bn)+(0cm,-0.55cm)$) ellipse ({1.5cm} and {4cm});
% begin{large}
draw[color=white] ($(xn)+(0,-1cm)$) node {color{black}$A$};
draw[color=white] ($(yn)+(0,-1cm)$) node {color{black}$B$};
%end{large}
to your TikZ drawing code.
You can of course change the numbers in the ellipse-drawing commands if you see that the ellipses are not good enough.
Hope this will help you!
Yes, this works fine . thanks !
– Athanasios Margaris
2 days ago
add a comment |
up vote
4
down vote
up vote
4
down vote
Add
draw ($(an)+(0cm,-0.55cm)$) ellipse ({1.5cm} and {4cm});
draw ($(bn)+(0cm,-0.55cm)$) ellipse ({1.5cm} and {4cm});
% begin{large}
draw[color=white] ($(xn)+(0,-1cm)$) node {color{black}$A$};
draw[color=white] ($(yn)+(0,-1cm)$) node {color{black}$B$};
%end{large}
to your TikZ drawing code.
You can of course change the numbers in the ellipse-drawing commands if you see that the ellipses are not good enough.
Hope this will help you!
Add
draw ($(an)+(0cm,-0.55cm)$) ellipse ({1.5cm} and {4cm});
draw ($(bn)+(0cm,-0.55cm)$) ellipse ({1.5cm} and {4cm});
% begin{large}
draw[color=white] ($(xn)+(0,-1cm)$) node {color{black}$A$};
draw[color=white] ($(yn)+(0,-1cm)$) node {color{black}$B$};
%end{large}
to your TikZ drawing code.
You can of course change the numbers in the ellipse-drawing commands if you see that the ellipses are not good enough.
Hope this will help you!
answered 2 days ago
Dũng Vũ
1,05018
1,05018
Yes, this works fine . thanks !
– Athanasios Margaris
2 days ago
add a comment |
Yes, this works fine . thanks !
– Athanasios Margaris
2 days ago
Yes, this works fine . thanks !
– Athanasios Margaris
2 days ago
Yes, this works fine . thanks !
– Athanasios Margaris
2 days ago
add a comment |
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f460422%2fset-drawing-in-tikz%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown