Which partition to make active?












4















In Windows 10 "Disk Management" I accidentally change the active partition to another drive and now I can not remember which one should be active. My C: is an SSD has 4 partitions:



System reserved 500MB
C: drive
100GB unallocated for provisioning
470MB recovery partition


Now should I make C: partition active or the partition labeled system reserved 500MB ?










share|improve this question



























    4















    In Windows 10 "Disk Management" I accidentally change the active partition to another drive and now I can not remember which one should be active. My C: is an SSD has 4 partitions:



    System reserved 500MB
    C: drive
    100GB unallocated for provisioning
    470MB recovery partition


    Now should I make C: partition active or the partition labeled system reserved 500MB ?










    share|improve this question

























      4












      4








      4


      1






      In Windows 10 "Disk Management" I accidentally change the active partition to another drive and now I can not remember which one should be active. My C: is an SSD has 4 partitions:



      System reserved 500MB
      C: drive
      100GB unallocated for provisioning
      470MB recovery partition


      Now should I make C: partition active or the partition labeled system reserved 500MB ?










      share|improve this question














      In Windows 10 "Disk Management" I accidentally change the active partition to another drive and now I can not remember which one should be active. My C: is an SSD has 4 partitions:



      System reserved 500MB
      C: drive
      100GB unallocated for provisioning
      470MB recovery partition


      Now should I make C: partition active or the partition labeled system reserved 500MB ?







      windows-10 boot






      share|improve this question













      share|improve this question











      share|improve this question




      share|improve this question










      asked yesterday









      WelliamWelliam

      3254725




      3254725






















          1 Answer
          1






          active

          oldest

          votes


















          7














          The partition flagged "active" should be the boot(loader) one. That is, the partition with BOOTMGR (and the BCD) on it.



          On a typical fresh Windows 10 installation, this would be the "System Reserved" partition, yes.



          Of course, this only applies to MBR disks (booted in BIOS/CSM compatibility mode). GPT disks should instead be using a EFI System Partition, identified by the partition ID rather than any "active" flag. Windows can only boot GPT disks in UEFI mode.






          share|improve this answer
























          • The C: drive labeled "boot" but it is not this partition it should be the "system reserved" labeled "System" ?

            – Welliam
            yesterday








          • 2





            @Welliam The "boot" label in Disk Management is a lie. The only way to be completely sure is to mount the partition and check for a BOOTMGR, though 9 times out of 10 you can guess it's just the System Reserved partition. In the event that you do end up setting the wrong partition, this can be fixed by booting from a Windows install DVD/USB and using diskpart from the command prompt it provides. Automatic boot repair might also fix it.

            – Bob
            yesterday













          Your Answer








          StackExchange.ready(function() {
          var channelOptions = {
          tags: "".split(" "),
          id: "3"
          };
          initTagRenderer("".split(" "), "".split(" "), channelOptions);

          StackExchange.using("externalEditor", function() {
          // Have to fire editor after snippets, if snippets enabled
          if (StackExchange.settings.snippets.snippetsEnabled) {
          StackExchange.using("snippets", function() {
          createEditor();
          });
          }
          else {
          createEditor();
          }
          });

          function createEditor() {
          StackExchange.prepareEditor({
          heartbeatType: 'answer',
          autoActivateHeartbeat: false,
          convertImagesToLinks: true,
          noModals: true,
          showLowRepImageUploadWarning: true,
          reputationToPostImages: 10,
          bindNavPrevention: true,
          postfix: "",
          imageUploader: {
          brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
          contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
          allowUrls: true
          },
          onDemand: true,
          discardSelector: ".discard-answer"
          ,immediatelyShowMarkdownHelp:true
          });


          }
          });














          draft saved

          draft discarded


















          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1415176%2fwhich-partition-to-make-active%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown

























          1 Answer
          1






          active

          oldest

          votes








          1 Answer
          1






          active

          oldest

          votes









          active

          oldest

          votes






          active

          oldest

          votes









          7














          The partition flagged "active" should be the boot(loader) one. That is, the partition with BOOTMGR (and the BCD) on it.



          On a typical fresh Windows 10 installation, this would be the "System Reserved" partition, yes.



          Of course, this only applies to MBR disks (booted in BIOS/CSM compatibility mode). GPT disks should instead be using a EFI System Partition, identified by the partition ID rather than any "active" flag. Windows can only boot GPT disks in UEFI mode.






          share|improve this answer
























          • The C: drive labeled "boot" but it is not this partition it should be the "system reserved" labeled "System" ?

            – Welliam
            yesterday








          • 2





            @Welliam The "boot" label in Disk Management is a lie. The only way to be completely sure is to mount the partition and check for a BOOTMGR, though 9 times out of 10 you can guess it's just the System Reserved partition. In the event that you do end up setting the wrong partition, this can be fixed by booting from a Windows install DVD/USB and using diskpart from the command prompt it provides. Automatic boot repair might also fix it.

            – Bob
            yesterday


















          7














          The partition flagged "active" should be the boot(loader) one. That is, the partition with BOOTMGR (and the BCD) on it.



          On a typical fresh Windows 10 installation, this would be the "System Reserved" partition, yes.



          Of course, this only applies to MBR disks (booted in BIOS/CSM compatibility mode). GPT disks should instead be using a EFI System Partition, identified by the partition ID rather than any "active" flag. Windows can only boot GPT disks in UEFI mode.






          share|improve this answer
























          • The C: drive labeled "boot" but it is not this partition it should be the "system reserved" labeled "System" ?

            – Welliam
            yesterday








          • 2





            @Welliam The "boot" label in Disk Management is a lie. The only way to be completely sure is to mount the partition and check for a BOOTMGR, though 9 times out of 10 you can guess it's just the System Reserved partition. In the event that you do end up setting the wrong partition, this can be fixed by booting from a Windows install DVD/USB and using diskpart from the command prompt it provides. Automatic boot repair might also fix it.

            – Bob
            yesterday
















          7












          7








          7







          The partition flagged "active" should be the boot(loader) one. That is, the partition with BOOTMGR (and the BCD) on it.



          On a typical fresh Windows 10 installation, this would be the "System Reserved" partition, yes.



          Of course, this only applies to MBR disks (booted in BIOS/CSM compatibility mode). GPT disks should instead be using a EFI System Partition, identified by the partition ID rather than any "active" flag. Windows can only boot GPT disks in UEFI mode.






          share|improve this answer













          The partition flagged "active" should be the boot(loader) one. That is, the partition with BOOTMGR (and the BCD) on it.



          On a typical fresh Windows 10 installation, this would be the "System Reserved" partition, yes.



          Of course, this only applies to MBR disks (booted in BIOS/CSM compatibility mode). GPT disks should instead be using a EFI System Partition, identified by the partition ID rather than any "active" flag. Windows can only boot GPT disks in UEFI mode.







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered yesterday









          BobBob

          46.1k20140173




          46.1k20140173













          • The C: drive labeled "boot" but it is not this partition it should be the "system reserved" labeled "System" ?

            – Welliam
            yesterday








          • 2





            @Welliam The "boot" label in Disk Management is a lie. The only way to be completely sure is to mount the partition and check for a BOOTMGR, though 9 times out of 10 you can guess it's just the System Reserved partition. In the event that you do end up setting the wrong partition, this can be fixed by booting from a Windows install DVD/USB and using diskpart from the command prompt it provides. Automatic boot repair might also fix it.

            – Bob
            yesterday





















          • The C: drive labeled "boot" but it is not this partition it should be the "system reserved" labeled "System" ?

            – Welliam
            yesterday








          • 2





            @Welliam The "boot" label in Disk Management is a lie. The only way to be completely sure is to mount the partition and check for a BOOTMGR, though 9 times out of 10 you can guess it's just the System Reserved partition. In the event that you do end up setting the wrong partition, this can be fixed by booting from a Windows install DVD/USB and using diskpart from the command prompt it provides. Automatic boot repair might also fix it.

            – Bob
            yesterday



















          The C: drive labeled "boot" but it is not this partition it should be the "system reserved" labeled "System" ?

          – Welliam
          yesterday







          The C: drive labeled "boot" but it is not this partition it should be the "system reserved" labeled "System" ?

          – Welliam
          yesterday






          2




          2





          @Welliam The "boot" label in Disk Management is a lie. The only way to be completely sure is to mount the partition and check for a BOOTMGR, though 9 times out of 10 you can guess it's just the System Reserved partition. In the event that you do end up setting the wrong partition, this can be fixed by booting from a Windows install DVD/USB and using diskpart from the command prompt it provides. Automatic boot repair might also fix it.

          – Bob
          yesterday







          @Welliam The "boot" label in Disk Management is a lie. The only way to be completely sure is to mount the partition and check for a BOOTMGR, though 9 times out of 10 you can guess it's just the System Reserved partition. In the event that you do end up setting the wrong partition, this can be fixed by booting from a Windows install DVD/USB and using diskpart from the command prompt it provides. Automatic boot repair might also fix it.

          – Bob
          yesterday




















          draft saved

          draft discarded




















































          Thanks for contributing an answer to Super User!


          • Please be sure to answer the question. Provide details and share your research!

          But avoid



          • Asking for help, clarification, or responding to other answers.

          • Making statements based on opinion; back them up with references or personal experience.


          To learn more, see our tips on writing great answers.




          draft saved


          draft discarded














          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1415176%2fwhich-partition-to-make-active%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown





















































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown

































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown







          Popular posts from this blog

          數位音樂下載

          When can things happen in Etherscan, such as the picture below?

          格利澤436b